david/ipxe
david
/
ipxe
Archived
1
0
Fork 0
Code
This repository has been archived on 2020-12-06. You can view files and clone it, but cannot push or open issues or pull requests.
ipxe/src/include/ipxe/errfile.h

376 lines
20 KiB
C
Raw Normal View History

[build] Rename gPXE to iPXE Access to the gpxe.org and etherboot.org domains and associated resources has been revoked by the registrant of the domain. Work around this problem by renaming project from gPXE to iPXE, and updating URLs to match. Also update README, LOG and COPYRIGHTS to remove obsolete information. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-04-19 21:16:01 +02:00
#ifndef _IPXE_ERRFILE_H
#define _IPXE_ERRFILE_H
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
/** @file
*
* Error file identifiers
*
*/
[legal] Relicense files under GPL2_OR_LATER_OR_UBDL These files cannot be automatically relicensed by util/relicense.pl since they either contain unusual but trivial contributions (such as the addition of __nonnull function attributes), or contain lines dating back to the initial git revision (and so require manual knowledge of the code's origin). Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-03-02 14:29:46 +01:00
FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
[legal] Add a selection of FILE_LICENCE declarations Add FILE_LICENCE declarations to almost all files that make up the various standard builds of gPXE.
2009-05-01 16:41:06 +02:00
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
#include <bits/errfile.h>
/**
* @defgroup errfilecat Error file identifier categories
*
* @{
*/
#define ERRFILE_CORE 0x00002000 /**< Core code */
#define ERRFILE_DRIVER 0x00004000 /**< Driver code */
#define ERRFILE_NET 0x00006000 /**< Networking code */
#define ERRFILE_IMAGE 0x00008000 /**< Image code */
#define ERRFILE_OTHER 0x0000e000 /**< Any other code */
/** @} */
/** Flag for architecture-dependent error files */
#define ERRFILE_ARCH 0x00800000
/**
* @defgroup errfile Error file identifiers
*
* These values are automatically incorporated into the definitions
* for error numbers such as EINVAL.
*
* @{
*/
#define ERRFILE_asprintf ( ERRFILE_CORE | 0x00000000 )
#define ERRFILE_downloader ( ERRFILE_CORE | 0x00010000 )
#define ERRFILE_exec ( ERRFILE_CORE | 0x00020000 )
#define ERRFILE_hw ( ERRFILE_CORE | 0x00030000 )
#define ERRFILE_iobuf ( ERRFILE_CORE | 0x00040000 )
#define ERRFILE_job ( ERRFILE_CORE | 0x00050000 )
#define ERRFILE_linebuf ( ERRFILE_CORE | 0x00060000 )
#define ERRFILE_monojob ( ERRFILE_CORE | 0x00070000 )
#define ERRFILE_nvo ( ERRFILE_CORE | 0x00080000 )
#define ERRFILE_open ( ERRFILE_CORE | 0x00090000 )
#define ERRFILE_posix_io ( ERRFILE_CORE | 0x000a0000 )
#define ERRFILE_resolv ( ERRFILE_CORE | 0x000b0000 )
#define ERRFILE_settings ( ERRFILE_CORE | 0x000c0000 )
#define ERRFILE_vsprintf ( ERRFILE_CORE | 0x000d0000 )
#define ERRFILE_xfer ( ERRFILE_CORE | 0x000e0000 )
Add RFC2090 TFTP multicast support.
2007-11-28 11:57:26 +01:00
#define ERRFILE_bitmap ( ERRFILE_CORE | 0x000f0000 )
[base64] Add ability to decode base64 strings Inspired-by: Piotr Jaroszyński <p.jaroszynski@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-05-28 13:42:00 +02:00
#define ERRFILE_base64 ( ERRFILE_CORE | 0x00100000 )
[base16] Add generic base16 encoding and decoding routines Base16 encoding is currently implemented in both iSCSI and SRP. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-05-28 15:58:04 +02:00
#define ERRFILE_base16 ( ERRFILE_CORE | 0x00110000 )
[block] Replace gPXE block-device API with an iPXE asynchronous interface The block device interface used in gPXE predates the invention of even the old gPXE data-transfer interface, let alone the current iPXE generic asynchronous interface mechanism. Bring this old code up to date, with the following benefits: o Block device commands can be cancelled by the requestor. The INT 13 layer uses this to provide a global timeout on all INT 13 calls, with the result that an unexpected passive failure mode (such as an iSCSI target ACKing the request but never sending a response) will lead to a timeout that gets reported back to the INT 13 user, rather than simply freezing the system. o INT 13,00 (reset drive) is now able to reset the underlying block device. INT 13 users, such as DOS, that use INT 13,00 as a method for error recovery now have a chance of recovering. o All block device commands are tagged, with a numerical tag that will show up in debugging output and in packet captures; this will allow easier interpretation of bug reports that include both sources of information. o The extremely ugly hacks used to generate the boot firmware tables have been eradicated and replaced with a generic acpi_describe() method (exploiting the ability of iPXE interfaces to pass through methods to an underlying interface). The ACPI tables are now built in a shared data block within .bss16, rather than each requiring dedicated space in .data16. o The architecture-independent concept of a SAN device has been exposed to the iPXE core through the sanboot API, which provides calls to hook, unhook, boot, and describe SAN devices. This allows for much more flexible usage patterns (such as hooking an empty SAN device and then running an OS installer via TFTP). Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-09-03 17:11:51 +02:00
#define ERRFILE_blockdev ( ERRFILE_CORE | 0x00120000 )
#define ERRFILE_acpi ( ERRFILE_CORE | 0x00130000 )
#define ERRFILE_null_sanboot ( ERRFILE_CORE | 0x00140000 )
[int13] Add infrastructure to support EDD version 4.0 Support the extensions mandated by EDD 4.0, including: o the ability to specify a flat physical address in a disk address packet, o the ability to specify a sector count greater than 127 in a disk address packet, o support for all functions within the Fixed Disk Access and EDD Support subsets, o the ability to describe a device using EDD Device Path Information. This implementation is based on draft revision 3 of the EDD 4.0 specification, with reference to the EDD 3.0 specification. It is possible that this implementation may need to change in order to conform to the final published EDD 4.0 specification. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-09-22 01:12:23 +02:00
#define ERRFILE_edd ( ERRFILE_CORE | 0x00150000 )
[parseopt] Add generic option-parsing library Command implementations tend to include a substantial amount of common boilerplate code revolving around the parsing of command-line options and arguments. This increases the size cost of each command. Introduce an option-parsing library that abstracts out the common operations involved in command implementations. This enables the size of each individual command to be reduced, and also enhances consistency between commands. Total size of the library is 704 bytes, to be amortised across all command implementations. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-11-21 16:58:30 +01:00
#define ERRFILE_parseopt ( ERRFILE_CORE | 0x00160000 )
[test] Run self-tests as an embedded image Allow iPXE to exit after running self-tests, rather than locking the machine. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-03-18 03:42:00 +01:00
#define ERRFILE_test ( ERRFILE_CORE | 0x00170000 )
[xferbuf] Add generic data-transfer buffer Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-05-08 17:54:38 +02:00
#define ERRFILE_xferbuf ( ERRFILE_CORE | 0x00180000 )
[pending] Add concept of "pending operations" iPXE is fundamentally asynchronous in operation: some operations continue in the background even after the foreground has continued to a new task. For example, the closing FIN/ACK exchanges of a TCP connection will take place in the background after an HTTP download has completed. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-06-09 19:48:09 +02:00
#define ERRFILE_pending ( ERRFILE_CORE | 0x00190000 )
[cmdline] Add "poweroff" command Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Marin Hannache <git@mareo.fr> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-07-13 14:31:15 +02:00
#define ERRFILE_null_reboot ( ERRFILE_CORE | 0x001a0000 )
[ping] Add generic ping mechanism Add generic pinger mechanism (analogous to the generic downloader mechanism) which opens a ping socket, transmits ping requests, and passes information about ping replies to a callback function. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-10-21 15:17:47 +02:00
#define ERRFILE_pinger ( ERRFILE_CORE | 0x001b0000 )
[fbcon] Add generic concept of a frame buffer console Add support for a simple frame buffer console, using single buffering and a fixed-width bitmap font. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-11-28 05:14:58 +01:00
#define ERRFILE_fbcon ( ERRFILE_CORE | 0x001c0000 )
[console] Add centralised concept of colours and colour pairs Add a centralised concept of colours and colour pairs (using the default colour pairs as configured via config/colour.h). A colour pair consists of a pair of colour indices. Add the ability to redefine both a colour pair and an individual colour index, with minimal overhead if this feature is not required (e.g. because the relevant shell commands are not present in the build). Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-12-07 21:53:20 +01:00
#define ERRFILE_ansicol ( ERRFILE_CORE | 0x001d0000 )
#define ERRFILE_ansicoldef ( ERRFILE_CORE | 0x001e0000 )
[fault] Generalise NETDEV_DISCARD_RATE fault injection mechanism Provide a generic inject_fault() function that can be used to inject random faults with configurable probabilities. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-07-22 03:56:49 +02:00
#define ERRFILE_fault ( ERRFILE_CORE | 0x001f0000 )
[block] Add generic block device translator Add a generic mechanism for providing block devices on top of a data transfer interface (such as HTTP). Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-08-04 16:33:11 +02:00
#define ERRFILE_blocktrans ( ERRFILE_CORE | 0x00200000 )
[pixbuf] Enable PNG format by default Enable IMAGE_PNG (but not IMAGE_PNM) by default, and drag in the relevant objects only when image_pixbuf() is present in the binary. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-07-29 16:58:59 +02:00
#define ERRFILE_pixbuf ( ERRFILE_CORE | 0x00210000 )
[efi] Add basic EFI SAN booting capability Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-11-16 23:22:22 +01:00
#define ERRFILE_efi_block ( ERRFILE_CORE | 0x00220000 )
[block] Centralise SAN device abstraction Create a central SAN device abstraction to be shared between BIOS and UEFI. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2017-03-04 19:43:07 +01:00
#define ERRFILE_sanboot ( ERRFILE_CORE | 0x00230000 )
[block] Add dummy SAN device Add a dummy SAN device which allows the "sanhook" command to be tested even when no SAN booting capability is present on the platform. This allows substantial portions of the SAN boot code to be run in Linux under Valgrind. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2017-03-26 14:42:52 +02:00
#define ERRFILE_dummy_sanboot ( ERRFILE_CORE | 0x00240000 )
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
#define ERRFILE_eisa ( ERRFILE_DRIVER | 0x00000000 )
#define ERRFILE_isa ( ERRFILE_DRIVER | 0x00010000 )
#define ERRFILE_isapnp ( ERRFILE_DRIVER | 0x00020000 )
#define ERRFILE_mca ( ERRFILE_DRIVER | 0x00030000 )
#define ERRFILE_pci ( ERRFILE_DRIVER | 0x00040000 )
[linux] Add device and driver model Add the base to build linux drivers and the linux UI code on. UI fills device requests, which are later walked over by the linux root_driver and delegated to specific linux drivers. Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-05-31 18:50:11 +02:00
#define ERRFILE_linux ( ERRFILE_DRIVER | 0x00050000 )
[pci] Add support for reading and writing PCI Vital Product Data (VPD) Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-11-24 22:01:24 +01:00
#define ERRFILE_pcivpd ( ERRFILE_DRIVER | 0x00060000 )
[usb] Add basic support for USB devices Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-02-02 15:37:00 +01:00
#define ERRFILE_usb ( ERRFILE_DRIVER | 0x00070000 )
[usb] Add basic support for USB hubs Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-02-02 15:38:42 +01:00
#define ERRFILE_usbhub ( ERRFILE_DRIVER | 0x00080000 )
[usb] Add support for xHCI host controllers Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-02-02 15:40:06 +01:00
#define ERRFILE_xhci ( ERRFILE_DRIVER | 0x00090000 )
[ehci] Add support for EHCI host controllers Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-03-15 02:01:08 +01:00
#define ERRFILE_ehci ( ERRFILE_DRIVER | 0x000a0000 )
[uhci] Add support for UHCI host controllers Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-05-10 00:14:34 +02:00
#define ERRFILE_uhci ( ERRFILE_DRIVER | 0x000b0000 )
[usb] Add generic USB human interface device (HID) framework Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-05-11 15:57:28 +02:00
#define ERRFILE_usbhid ( ERRFILE_DRIVER | 0x000c0000 )
[usb] Add basic support for USB keyboards When USB network card drivers are used, the BIOS' legacy USB capability is necessarily disabled since there is no way to share the host controller between the BIOS and iPXE. This currently results in USB keyboards becoming non-functional in USB-enabled builds of iPXE. Fix by adding basic support for USB keyboards, enabled by default in iPXE builds which include USB support. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-05-11 16:42:54 +02:00
#define ERRFILE_usbkbd ( ERRFILE_DRIVER | 0x000d0000 )
[efi] Add a USB host controller driver based on EFI_USB_IO_PROTOCOL Allow iPXE to coexist with other USB device drivers, by attaching to the EFI_USB_IO_PROTOCOL instances provided by the UEFI platform firmware. The EFI_USB_IO_PROTOCOL is an unsurprisingly badly designed abstraction of a USB device. The poor design choices intrinsic in the UEFI specification prevent efficient operation as a network device, with the result that devices operated using the EFI_USB_IO_PROTOCOL operate approximately two orders of magnitude slower than devices operated using our native EHCI or xHCI host controller drivers. Since the performance is so abysmally slow, and since the underlying problems are due to fundamental architectural mistakes in the UEFI specification, support for the EFI_USB_IO_PROTOCOL host controller driver is left as disabled by default. Users are advised to use the native iPXE host controller drivers instead. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-09-04 03:26:01 +02:00
#define ERRFILE_usbio ( ERRFILE_DRIVER | 0x000e0000 )
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
#define ERRFILE_nvs ( ERRFILE_DRIVER | 0x00100000 )
#define ERRFILE_spi ( ERRFILE_DRIVER | 0x00110000 )
#define ERRFILE_i2c_bit ( ERRFILE_DRIVER | 0x00120000 )
#define ERRFILE_spi_bit ( ERRFILE_DRIVER | 0x00130000 )
[pci] Auto-resize VPD fields used for non-volatile storage Signed-off-by: Michael Brown <mcb30@ipxe.org>
2011-01-10 04:35:34 +01:00
#define ERRFILE_nvsvpd ( ERRFILE_DRIVER | 0x00140000 )
[serial] Add general abstraction of a 16550-compatible UART Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-06-29 09:39:58 +02:00
#define ERRFILE_uart ( ERRFILE_DRIVER | 0x00150000 )
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
#define ERRFILE_3c509 ( ERRFILE_DRIVER | 0x00200000 )
#define ERRFILE_bnx2 ( ERRFILE_DRIVER | 0x00210000 )
#define ERRFILE_cs89x0 ( ERRFILE_DRIVER | 0x00220000 )
#define ERRFILE_eepro ( ERRFILE_DRIVER | 0x00230000 )
#define ERRFILE_etherfabric ( ERRFILE_DRIVER | 0x00240000 )
#define ERRFILE_legacy ( ERRFILE_DRIVER | 0x00250000 )
#define ERRFILE_natsemi ( ERRFILE_DRIVER | 0x00260000 )
#define ERRFILE_pnic ( ERRFILE_DRIVER | 0x00270000 )
#define ERRFILE_prism2_pci ( ERRFILE_DRIVER | 0x00280000 )
#define ERRFILE_prism2_plx ( ERRFILE_DRIVER | 0x00290000 )
#define ERRFILE_rtl8139 ( ERRFILE_DRIVER | 0x002a0000 )
#define ERRFILE_smc9000 ( ERRFILE_DRIVER | 0x002b0000 )
#define ERRFILE_tg3 ( ERRFILE_DRIVER | 0x002c0000 )
Added error IDs for all files in drivers/net; they're likely to need them.
2007-08-19 01:29:27 +02:00
#define ERRFILE_3c509_eisa ( ERRFILE_DRIVER | 0x002d0000 )
#define ERRFILE_3c515 ( ERRFILE_DRIVER | 0x002e0000 )
#define ERRFILE_3c529 ( ERRFILE_DRIVER | 0x002f0000 )
#define ERRFILE_3c595 ( ERRFILE_DRIVER | 0x00300000 )
#define ERRFILE_3c5x9 ( ERRFILE_DRIVER | 0x00310000 )
#define ERRFILE_3c90x ( ERRFILE_DRIVER | 0x00320000 )
#define ERRFILE_amd8111e ( ERRFILE_DRIVER | 0x00330000 )
#define ERRFILE_davicom ( ERRFILE_DRIVER | 0x00340000 )
#define ERRFILE_depca ( ERRFILE_DRIVER | 0x00350000 )
#define ERRFILE_dmfe ( ERRFILE_DRIVER | 0x00360000 )
#define ERRFILE_eepro100 ( ERRFILE_DRIVER | 0x00380000 )
#define ERRFILE_epic100 ( ERRFILE_DRIVER | 0x00390000 )
#define ERRFILE_forcedeth ( ERRFILE_DRIVER | 0x003a0000 )
#define ERRFILE_mtd80x ( ERRFILE_DRIVER | 0x003b0000 )
#define ERRFILE_ns83820 ( ERRFILE_DRIVER | 0x003c0000 )
#define ERRFILE_ns8390 ( ERRFILE_DRIVER | 0x003d0000 )
#define ERRFILE_pcnet32 ( ERRFILE_DRIVER | 0x003e0000 )
#define ERRFILE_r8169 ( ERRFILE_DRIVER | 0x003f0000 )
#define ERRFILE_sis900 ( ERRFILE_DRIVER | 0x00400000 )
#define ERRFILE_sundance ( ERRFILE_DRIVER | 0x00410000 )
#define ERRFILE_tlan ( ERRFILE_DRIVER | 0x00420000 )
#define ERRFILE_tulip ( ERRFILE_DRIVER | 0x00430000 )
[rhine] Rewrite VIA Rhine driver Replace the old via-rhine driver with a new version using the iPXE API. Includes fixes by Thomas Miletich for: - MMIO access - Link detection - RX completion in RX overflow case - Reset and EEPROM reloading - CRC stripping - Missing cpu_to_le32() calls - Missing memory barriers Signed-off-by: Adrian Jamróz <adrian.jamroz@gmail.com> Modified-by: Thomas Miletich <thomas.miletich@gmail.com> Tested-by: Thomas Miletich <thomas.miletich@gmail.com> Tested-by: Robin Smidsrød <robin@smidsrod.no> Modified-by: Michael Brown <mcb30@ipxe.org> Tested-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-07-13 16:11:50 +02:00
#define ERRFILE_rhine ( ERRFILE_DRIVER | 0x00440000 )
[velocity] Rewrite VIA Velocity driver Signed-off-by: Adrian Jamróz <adrian.jamroz@gmail.com> Modified-by: Thomas Miletich <thomas.miletich@gmail.com> Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-07-13 18:59:07 +02:00
#define ERRFILE_velocity ( ERRFILE_DRIVER | 0x00450000 )
Added error IDs for all files in drivers/net; they're likely to need them.
2007-08-19 01:29:27 +02:00
#define ERRFILE_w89c840 ( ERRFILE_DRIVER | 0x00460000 )
Added defines for Infiniband files (which can't be committed to the main tree yet, but reserving the error numbers now avoids problems later).
2007-09-21 02:19:04 +02:00
#define ERRFILE_ipoib ( ERRFILE_DRIVER | 0x00470000 )
[e1000] Update e1000 driver This commit replaces the current gPXE e1000 driver with one ported from Intel source code available at http://sourceforge.net/projects/e1000/ which is upstream source for the Linux kernel e1000 drivers, and should support most if not all PCI e1000 variants. Signed-off-by: Marty Connor <mdc@etherboot.org>
2010-03-17 08:02:32 +01:00
#define ERRFILE_e1000_main ( ERRFILE_DRIVER | 0x00480000 )
[e1000e] Add e1000e driver This commit adds an e1000e driver based on Intel source code available at: http://sourceforge.net/projects/e1000/ which is upstream source for the Linux kernel e1000 drivers, and should support many PCIe e1000 variants. Signed-off-by: Marty Connor <mdc@etherboot.org>
2010-03-17 08:18:46 +01:00
#define ERRFILE_e1000e_main ( ERRFILE_DRIVER | 0x00490000 )
[MTNIC] Minor cleanups of vendor-provided driver for Mellanox 10GigE cards Drivers are not allowed to call printf(). Converted eprintf() to DBG(), and removed spurious startup banner. Fixed hardcoded inclusion of little_bswap.h Use EIO rather than 1 as an error number.
2008-04-22 18:49:29 +02:00
#define ERRFILE_mtnic ( ERRFILE_DRIVER | 0x004a0000 )
[phantom] Add support for NetXen Phantom NICs
2008-07-05 04:38:14 +02:00
#define ERRFILE_phantom ( ERRFILE_DRIVER | 0x004b0000 )
[ne2k_isa] Restore support for ne2k isa cards Add the simplified ne2k_isa driver. It is just a selective copy+paste of the relevant parts from ns8390.c plus a little trivial hacking to make it actually work. It is true that the code is pretty ugly, but: a) ns8390.c is worse b) It is only 372 lines and no #ifdefs c) It works both in qemu/bochs and in real hardware and we all know it is easier to cleanup working code Hope someone will find the time to rewrite this driver properly, but until then at least for me this is an ok solution. Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com>
2008-11-08 08:11:47 +01:00
#define ERRFILE_ne2k_isa ( ERRFILE_DRIVER | 0x004c0000 )
[b44] Add driver for Broadcom bcm44xx cards This driver is based on Stefan Hajnoczi's summer work, which is in turn based on version 1.01 of the linux b44 driver. I just assembled the pieces and fixed/added a few pieces here and there to make it work for my hardware. The most major limitation is that this driver won't work on systems with >1GB RAM due to the card not having enough address bits for that and gPXE not working around this limitation. Still, other than that the driver works well enough for at least 2 users :) and the above limitation can always be fixed when somebody wants it bad enough :) Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com>
2008-11-21 22:19:37 +01:00
#define ERRFILE_b44 ( ERRFILE_DRIVER | 0x004d0000 )
[rtl818x] Add driver for Realtek 8180/8185 wireless cards
2009-06-21 02:58:10 +02:00
#define ERRFILE_rtl818x ( ERRFILE_DRIVER | 0x004e0000 )
[sky2] Add support for Marvell Yukon-II gigabit Ethernet cards Signed-off-by: Michael Brown <mcb30@etherboot.org>
2009-08-03 01:14:01 +02:00
#define ERRFILE_sky2 ( ERRFILE_DRIVER | 0x004f0000 )
[ath5k] Add support for non-802.11n Atheros wireless NICs Signed-off-by: Michael Brown <mcb30@etherboot.org>
2009-08-07 11:25:35 +02:00
#define ERRFILE_ath5k ( ERRFILE_DRIVER | 0x00500000 )
[atl1e] Add Attansic L1E gigabit Ethernet driver Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-10-05 17:27:10 +02:00
#define ERRFILE_atl1e ( ERRFILE_DRIVER | 0x00510000 )
[sis190] Add sis190/191 ethernet driver Tested-by: Paul Hackett <paulfxhackett@gmail.com> Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-10-16 20:56:34 +02:00
#define ERRFILE_sis190 ( ERRFILE_DRIVER | 0x00520000 )
[myri10ge] Native driver for Myricom 10Gb Ethernet NICs This driver supports all current Myricom 10 gigabit Ethernet NICs. It was written from scratch for gPXE by Glenn Brown <glenn@myri.com>, referenencing Myricom's Linux and EFI drivers, with permission. Signed-off-by: Glenn Brown <glenn@myri.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-12-22 02:01:39 +01:00
#define ERRFILE_myri10ge ( ERRFILE_DRIVER | 0x00530000 )
[skge] Add driver for skge NICs This code is based on the linux skge driver. It supports Marvell Yukon and SysKonnect Gigabit chipsets. The code is based on code Michael Decker <mrd999@gmail.com> wrote for Google Summer of Code 2008. Support for dual-port cards is untested. The code, however, was left in. In my opinion it's easier to fix the code if we need to, instead of having to add support for it from scratch. Signed-off-by: Marty Connor <mdc@etherboot.org>
2010-01-14 18:04:50 +01:00
#define ERRFILE_skge ( ERRFILE_DRIVER | 0x00540000 )
[vxge] Add support for X3100 series 10GbE Server/Storage Adapter Signed-off-by: Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by: Masroor Vettuparambil <masroor.vettuparambil@neterion.com> Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Marty Connor <mdc@etherboot.org>
2010-02-02 10:42:36 +01:00
#define ERRFILE_vxge_main ( ERRFILE_DRIVER | 0x00550000 )
#define ERRFILE_vxge_config ( ERRFILE_DRIVER | 0x00560000 )
#define ERRFILE_vxge_traffic ( ERRFILE_DRIVER | 0x00570000 )
[igb] Add igb driver This commit adds an igb (Intel GigaBit) driver based on Intel source code available at: http://sourceforge.net/projects/e1000/ which is upstream source for the Linux kernel e1000 drivers, and should support some PCIe e1000 variants. Signed-off-by: Marty Connor <mdc@etherboot.org>
2010-03-17 08:44:27 +01:00
#define ERRFILE_igb_main ( ERRFILE_DRIVER | 0x00580000 )
[efi] Add the "snpnet" driver Add a new network driver that consumes the EFI Simple Network Protocol. Also add a bus driver that can find the Simple Network Protocol that iPXE was loaded from; the resulting behavior is similar to the "undionly" driver for BIOS systems. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-05-28 05:08:28 +02:00
#define ERRFILE_snpnet ( ERRFILE_DRIVER | 0x00590000 )
#define ERRFILE_snponly ( ERRFILE_DRIVER | 0x005a0000 )
[jme] Add JMicron Ethernet driver A new driver for JMicron Ethernet controller. Reviewed-by: Joshua Oreman <oremanj@rwcr.net> Reviewed-by: Michael Brown <mbrown@fensystems.co.uk> Reviewed-by: Marty Connor <mdc@etherboot.org> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-06-01 00:09:02 +02:00
#define ERRFILE_jme ( ERRFILE_DRIVER | 0x005b0000 )
[virtio] Replace virtio-net with native iPXE driver This patch adds a native iPXE virtio-net driver and removes the legacy Etherboot virtio-net driver. The main reasons for doing this are: 1. Multiple virtio-net NICs are now supported by iPXE. The legacy driver kept global state and caused issues in virtual machines with more than one virtio-net device. 2. Faster downloads. The native iPXE driver downloads 100 MB over HTTP in 12s, the legacy Etherboot driver in 37s. This simple benchmark uses KVM with tap networking and the Python SimpleHTTPServer both running on the same host. Changes to core virtio code reduce vring descriptors to 256 (QEMU uses 128 for virtio-blk and 256 for virtio-net) and change the opaque token from u16 to void*. Lowering the descriptor count reduces memory consumption. The void* opaque token change makes driver code simpler. Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-07-02 20:15:47 +02:00
#define ERRFILE_virtio_net ( ERRFILE_DRIVER | 0x005c0000 )
[linux] Add the tap driver Add the tap driver that can be used like: $ ./ipxe.linux --net tap,if=tap0,mac=00:0c:29:c5:39:a1 The if setting is mandatory. Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-05-28 01:09:22 +02:00
#define ERRFILE_tap ( ERRFILE_DRIVER | 0x005d0000 )
[igbvf] Add igbvf driver Driver for Intel 82576 based virtual functions, based on Intel source code available at: http://sourceforge.net/projects/e1000 (igbvf-1.0.7) Based on initial port from Eric Keller <ekeller@princeton.edu>. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-12-16 04:49:32 +01:00
#define ERRFILE_igbvf_main ( ERRFILE_DRIVER | 0x005e0000 )
[ath9k] Add ath9k driver Signed-off-by: Michael Brown <mcb30@ipxe.org>
2011-10-14 16:19:32 +02:00
#define ERRFILE_ath9k ( ERRFILE_DRIVER | 0x005f0000 )
#define ERRFILE_ath ( ERRFILE_DRIVER | 0x00600000 )
[vmxnet3] Add VMware vmxnet3 driver Reviewed-by: Pete Holland <pholland27@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2011-12-06 16:26:35 +01:00
#define ERRFILE_vmxnet3 ( ERRFILE_DRIVER | 0x00610000 )
[mii] Add generic MII reset function iPXE provides no support for manually configuring the link speed. Provide a generic routine which should be able to reset any MII/GMII PHY and enable autonegotiation. Prototyped-by: Thomas Miletich <thomas.miletich@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-04-18 17:30:11 +02:00
#define ERRFILE_mii ( ERRFILE_DRIVER | 0x00620000 )
[realtek] Replace driver for Realtek Gigabit NICs Tested-by: Thomas Miletich <thomas.miletich@gmail.com> Debugged-by: Thomas Miletich <thomas.miletich@gmail.com> Tested-by: Robin Smidsrød <robin@smidsrod.no> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-04-17 22:35:40 +02:00
#define ERRFILE_realtek ( ERRFILE_DRIVER | 0x00630000 )
[skel] Add skeleton network driver Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-04-21 00:41:00 +02:00
#define ERRFILE_skeleton ( ERRFILE_DRIVER | 0x00640000 )
[intel] Replace driver for Intel Gigabit NICs Tested-by: Robin Smidsrød <robin@smidsrod.no> Tested-by: Thomas Miletich <thomas.miletich@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-04-24 00:29:18 +02:00
#define ERRFILE_intel ( ERRFILE_DRIVER | 0x00650000 )
[myson] Replace driver for Myson Technology NICs Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-04-26 23:10:54 +02:00
#define ERRFILE_myson ( ERRFILE_DRIVER | 0x00660000 )
[intel] Add intelx driver for Intel 10 Gigabit Ethernet NICs Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-04-03 16:21:08 +02:00
#define ERRFILE_intelx ( ERRFILE_DRIVER | 0x00670000 )
[efi] Allow network devices to be created on top of arbitrary SNP devices Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-07-01 18:58:09 +02:00
#define ERRFILE_snp ( ERRFILE_DRIVER | 0x00680000 )
[xen] Add support for Xen netfront virtual NICs Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-07-29 00:39:28 +02:00
#define ERRFILE_netfront ( ERRFILE_DRIVER | 0x00690000 )
[efi] Add NII / UNDI driver Some UEFI network drivers provide a software UNDI interface which is exposed via the Network Interface Identifier Protocol (NII), rather than providing a Simple Network Protocol (SNP). The UEFI platform firmware will usually include the SnpDxe driver, which attaches to NII and provides an SNP interface. The SNP interface is usually provided on the same handle as the underlying NII device. This causes problems for our EFI driver model: when efi_driver_connect() detaches existing drivers from the handle it will cause the SNP interface to be uninstalled, and so our SNP driver will not be able to attach to the handle. The platform firmware will eventually reattach the SnpDxe driver and may attach us to the SNP handle, but we have no way to prevent other drivers from attaching first. Fix by providing a driver which can attach directly to the NII protocol, using the software UNDI interface to drive the network device. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-10-03 14:17:22 +02:00
#define ERRFILE_nii ( ERRFILE_DRIVER | 0x006a0000 )
[hyperv] Add support for NetVSC paravirtual network devices Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-12-11 18:24:30 +01:00
#define ERRFILE_netvsc ( ERRFILE_DRIVER | 0x006b0000 )
[ncm] Add support for CDC-NCM USB Ethernet devices Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-02-02 15:41:19 +01:00
#define ERRFILE_ecm ( ERRFILE_DRIVER | 0x006c0000 )
#define ERRFILE_ncm ( ERRFILE_DRIVER | 0x006d0000 )
[usb] Add generic USB network device framework Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-02-16 15:05:45 +01:00
#define ERRFILE_usbnet ( ERRFILE_DRIVER | 0x006e0000 )
[dm96xx] Add driver for Davicom DM96xx USB Ethernet NICs Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-02-16 16:22:44 +01:00
#define ERRFILE_dm96xx ( ERRFILE_DRIVER | 0x006f0000 )
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
#define ERRFILE_scsi ( ERRFILE_DRIVER | 0x00700000 )
Added defines for Infiniband files (which can't be committed to the main tree yet, but reserving the error numbers now avoids problems later).
2007-09-21 02:19:04 +02:00
#define ERRFILE_arbel ( ERRFILE_DRIVER | 0x00710000 )
[Hermon] Add driver for Mellanox Hermon (ConnectX) cards.
2008-02-23 11:51:38 +01:00
#define ERRFILE_hermon ( ERRFILE_DRIVER | 0x00720000 )
[linda] Add support for QLogic 7220-based Infiniband HCAs These cards very nearly support our current IB Verbs model. There is one minor difference: multicast packets will always be delivered by the hardware to QP0, so the driver has to redirect them to the appropriate QP. This means that QP owners may see receive completions for buffers that they never posted. Nothing in our current codebase will break because of this.
2008-11-07 09:47:21 +01:00
#define ERRFILE_linda ( ERRFILE_DRIVER | 0x00730000 )
[ata] Make ATA command issuing partially asynchronous Move the icky call to step() from aoe.c to ata.c; this takes it at least one step further away from where it really doesn't belong. Unfortunately, AoE has the ugly aoe_discover() mechanism which means that we still have a step() loop in aoe.c for now; this needs to be replaced at some future point.
2009-07-08 00:01:28 +02:00
#define ERRFILE_ata ( ERRFILE_DRIVER | 0x00740000 )
[infiniband] Add support for SRP over Infiniband SRP is the SCSI RDMA Protocol. It allows for a method of SAN booting whereby the target is responsible for reading and writing data using Remote DMA directly to the initiator's memory. The software initiator merely sends and receives SCSI commands; it never has to touch the actual data.
2009-07-17 23:11:42 +02:00
#define ERRFILE_srp ( ERRFILE_DRIVER | 0x00750000 )
[qib7322] Add support for QLogic 7322 HCA Signed-off-by: Michael Brown <mcb30@ipxe.org>
2009-11-11 01:50:34 +01:00
#define ERRFILE_qib7322 ( ERRFILE_DRIVER | 0x00760000 )
[smsc75xx] Add driver for SMSC/Microchip LAN75xx USB Ethernet NICs This driver is functional but any downloads via a TCP-based protocol tend to perform poorly. The 1Gbps Ethernet line rate is substantially higher than the 480Mbps (in practice around 280Mbps) provided by USB2, and the device has only 32kB of internal buffer memory. Our 256kB TCP receive window therefore rapidly overflows the RX FIFO, leading to multiple dropped packets (usually within the same TCP window) and hence a low overall throughput. Reducing the TCP window size so that the RX FIFO does not overflow greatly increases throughput, but is not a general-purpose solution. Further investigation is required to determine how other OSes (e.g. Linux) cope with this scenario. It is possible that implementing TCP SACK would provide some benefit. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-03-10 15:37:18 +01:00
#define ERRFILE_smsc75xx ( ERRFILE_DRIVER | 0x00770000 )
[intel] Add support for mailbox used by virtual functions Virtual functions use a mailbox to communicate with the physical function driver: this covers functionality such as obtaining the MAC address. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-05-16 15:35:13 +02:00
#define ERRFILE_intelvf ( ERRFILE_DRIVER | 0x00780000 )
[intel] Add intelxvf driver for Intel 10 GigE virtual function NICs Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-05-16 15:36:56 +02:00
#define ERRFILE_intelxvf ( ERRFILE_DRIVER | 0x00790000 )
[smsc95xx] Add driver for SMSC/Microchip LAN95xx USB Ethernet NICs Tested using QEMU and usbredir to expose the LAN9512 chip present on a Raspberry Pi. There is a known issue with the LAN9512: an extra two bytes are appended to every transmitted packet. These two bytes comprise: { 0x00, 0x08 } if packet length == 0 (mod 8) { CRC[0], 0x00 } if packet length == 7 (mod 8) { CRC[0], CRC[1] } otherwise The extra bytes are appended whether the Ethernet CRC is generated manually or added automatically by the hardware. The issue occurs with the Linux kernel driver as well as the iPXE driver. It appears to be an undocumented hardware errata. TCP/IP traffic is not affected, since the IP header length field causes the extraneous bytes to be discarded by the receiver. However, protocols that rely on the length of the Ethernet frame (such as FCoE or iPXE's "lotest" protocol) will be unusable on this hardware. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-11-13 14:51:17 +01:00
#define ERRFILE_smsc95xx ( ERRFILE_DRIVER | 0x007a0000 )
[acm] Add support for CDC-ACM (aka USB RNDIS) devices Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-12-01 15:46:48 +01:00
#define ERRFILE_acm ( ERRFILE_DRIVER | 0x007b0000 )
[eoib] Add Ethernet over Infiniband (EoIB) driver EoIB is a fairly simple protocol in which raw Ethernet frames (excluding the CRC) are encapsulated within Infiniband Unreliable Datagrams, with a four-byte fixed EoIB header (which conveys no actual information). The Ethernet broadcast domain is provided by a multicast group, similar to the IPoIB IPv4 multicast group. The mapping from Ethernet MAC addresses to Infiniband address vectors is achieved by snooping incoming traffic and building a peer cache which can then be used to map a MAC address into a port GID. The address vector is completed using a path record lookup, as for IPoIB. Note that this requires every packet to include a GRH. Add basic support for EoIB devices. This driver is substantially derived from the IPoIB driver. There is currently no mechanism for automatically creating EoIB devices. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-03-09 01:26:56 +01:00
#define ERRFILE_eoib ( ERRFILE_DRIVER | 0x007c0000 )
[golan] Add Connect-IB, ConnectX-4 and ConnectX-4 Lx (Infiniband) support Signed-off-by: Wissam Shoukair <wissams@mellanox.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-03-21 14:09:13 +01:00
#define ERRFILE_golan ( ERRFILE_DRIVER | 0x007d0000 )
#define ERRFILE_flexboot_nodnic ( ERRFILE_DRIVER | 0x007e0000 )
[virtio] Add virtio 1.0 PCI support This commit adds support for driving virtio 1.0 PCI devices. In addition to various helpers, a number of vpm_ functions are introduced to be used instead of their legacy vp_ counterparts when accessing virtio 1.0 (aka modern) devices. Signed-off-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-04-11 11:26:58 +02:00
#define ERRFILE_virtio_pci ( ERRFILE_DRIVER | 0x007f0000 )
[pci] Add support for PCI Enhanced Allocation Some embedded devices have immovable BARs, which are described via a PCI Enhanced Allocation capability. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-05-14 19:34:08 +02:00
#define ERRFILE_pciea ( ERRFILE_DRIVER | 0x00c00000 )
[axge] Add driver for ASIX 10/100/1000 USB Ethernet NICs Add driver for the AX88178A (USB2) and AX88179 (USB3) 10/100/1000 Ethernet NICs. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-05-24 01:23:10 +02:00
#define ERRFILE_axge ( ERRFILE_DRIVER | 0x00c10000 )
[thunderx] Add driver for Cavium ThunderX SoC NICs Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-06-13 19:41:26 +02:00
#define ERRFILE_thunderx ( ERRFILE_DRIVER | 0x00c20000 )
[af_packet] Add new AF_PACKET driver for Linux This code largely inspired by tap.c. Allows for testing iPXE on real NICs from within Linux. For example: make bin-x86_64-linux/af_packet.linux valgrind ./bin-x86_64-linux/af_packet.linux --net af_packet,if=eth3 Tested as x86_64 and i386 binary. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2017-01-20 19:29:24 +01:00
#define ERRFILE_af_packet ( ERRFILE_DRIVER | 0x00c30000 )
[sfc] Add driver for Solarflare SFC8XXX adapters Signed-off-by: Martin Habets <mhabets@solarflare.com> Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2017-04-07 11:46:15 +02:00
#define ERRFILE_sfc_hunt ( ERRFILE_DRIVER | 0x00c40000 )
#define ERRFILE_efx_hunt ( ERRFILE_DRIVER | 0x00c50000 )
[exanic] Add driver for Exablaze ExaNIC cards Signed-off-by: Michael Brown <mcb30@ipxe.org>
2017-06-20 13:10:14 +02:00
#define ERRFILE_exanic ( ERRFILE_DRIVER | 0x00c60000 )
[smscusb] Abstract out common SMSC USB device functionality The smsc75xx and smsc95xx drivers include a substantial amount of identical functionality, varying only in the base address of register sets. Abstract out this common functionality to allow code to be shared between the drivers. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2017-07-06 17:58:22 +02:00
#define ERRFILE_smscusb ( ERRFILE_DRIVER | 0x00c70000 )
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
#define ERRFILE_aoe ( ERRFILE_NET | 0x00000000 )
#define ERRFILE_arp ( ERRFILE_NET | 0x00010000 )
#define ERRFILE_dhcpopts ( ERRFILE_NET | 0x00020000 )
#define ERRFILE_ethernet ( ERRFILE_NET | 0x00030000 )
#define ERRFILE_icmpv6 ( ERRFILE_NET | 0x00040000 )
#define ERRFILE_ipv4 ( ERRFILE_NET | 0x00050000 )
#define ERRFILE_ipv6 ( ERRFILE_NET | 0x00060000 )
#define ERRFILE_ndp ( ERRFILE_NET | 0x00070000 )
#define ERRFILE_netdevice ( ERRFILE_NET | 0x00080000 )
#define ERRFILE_nullnet ( ERRFILE_NET | 0x00090000 )
#define ERRFILE_tcp ( ERRFILE_NET | 0x000a0000 )
#define ERRFILE_ftp ( ERRFILE_NET | 0x000b0000 )
[http] Allow for HTTPS-only builds Separate out the core HTTP functionality (which is shared by both HTTP and HTTPS) from the provision of the "http://" URI opener. This allows for builds that support only "https://" URIs. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-02-28 15:53:28 +01:00
#define ERRFILE_httpcore ( ERRFILE_NET | 0x000c0000 )
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
#define ERRFILE_iscsi ( ERRFILE_NET | 0x000d0000 )
#define ERRFILE_tcpip ( ERRFILE_NET | 0x000e0000 )
#define ERRFILE_udp ( ERRFILE_NET | 0x000f0000 )
#define ERRFILE_dhcp ( ERRFILE_NET | 0x00100000 )
#define ERRFILE_dns ( ERRFILE_NET | 0x00110000 )
#define ERRFILE_tftp ( ERRFILE_NET | 0x00120000 )
Added defines for Infiniband files (which can't be committed to the main tree yet, but reserving the error numbers now avoids problems later).
2007-09-21 02:19:04 +02:00
#define ERRFILE_infiniband ( ERRFILE_NET | 0x00130000 )
[Settings] Add per-netdevice settings block Add a configuration settings block for each net device. This will provide the parent scope for settings applicable only to that network device (e.g. non-volatile options stored on the NIC, options obtained via DHCP, etc.). Expose the MAC address as a setting.
2008-03-20 22:06:03 +01:00
#define ERRFILE_netdev_settings ( ERRFILE_NET | 0x00140000 )
[Settings] Migrate DHCP and NVO code to the new settings API (untested)
2008-03-21 23:15:31 +01:00
#define ERRFILE_dhcppkt ( ERRFILE_NET | 0x00150000 )
[slam] Add Scalable Local Area Multicast (SLAM) protocol support Tested against the mini-slamd server located in contrib/mini-slamd with a single client, on a lossy network.
2008-06-10 01:04:19 +02:00
#define ERRFILE_slam ( ERRFILE_NET | 0x00160000 )
[infiniband] Add a standalone subnet management agent This generic SMA code can be used for any cards that do not provide firmware-based embedded SMAs.
2008-11-07 06:39:42 +01:00
#define ERRFILE_ib_sma ( ERRFILE_NET | 0x00170000 )
[infiniband] Add raw packet parser and constructor This can be used with cards that require the driver to construct and parse packet headers manually. Headers are optionally handled out-of-line from the packet payload, since some such cards will split received headers into a separate ring buffer.
2008-11-07 09:39:40 +01:00
#define ERRFILE_ib_packet ( ERRFILE_NET | 0x00180000 )
[icmp] Add support for sending ICMP echo requests Merge common functionality between IPv4 and IPv6 ICMP echo handling, and add support for transmitting ICMP echo requests and delivering ICMP echo replies to a (not yet implemented) ping_rx() function. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-10-21 15:10:07 +02:00
#define ERRFILE_icmpv4 ( ERRFILE_NET | 0x00190000 )
[infiniband] Split queue set functionality out of ipoib.c to ib_qset.c
2009-07-02 10:56:14 +02:00
#define ERRFILE_ib_qset ( ERRFILE_NET | 0x001a0000 )
[infiniband] Create a general management agent Generalise the subnet management agent into a general management agent capable of sending and responding to MADs, including support for retransmissions as necessary.
2009-07-07 00:09:26 +02:00
#define ERRFILE_ib_gma ( ERRFILE_NET | 0x001b0000 )
[infiniband] Provide a general mechanism for path record lookups Generalise out the path record lookup code from IPoIB.
2009-07-07 03:01:21 +02:00
#define ERRFILE_ib_pathrec ( ERRFILE_NET | 0x001c0000 )
[infiniband] Provide a general mechanism for multicast group joins Generalise out the multicast group membership record code from IPoIB.
2009-07-07 17:07:31 +02:00
#define ERRFILE_ib_mcast ( ERRFILE_NET | 0x001d0000 )
[infiniband] Add Communication Manager (CM) The Communication Manager is responsible for handling the setup and teardown of RC connections.
2009-07-17 23:10:42 +02:00
#define ERRFILE_ib_cm ( ERRFILE_NET | 0x001e0000 )
[802.11] Add support for 802.11 devices with software MAC layer This is required for all modern 802.11 devices, and allows drivers to be written for them with minimally more effort than is required for a wired NIC. Signed-off-by: Michael Brown <mcb30@etherboot.org> Modified-by: Michael Brown <mcb30@etherboot.org>
2009-07-21 20:16:38 +02:00
#define ERRFILE_net80211 ( ERRFILE_NET | 0x001f0000 )
[infiniband] Add the concept of a management interface A management interface is the component through which both local and remote management agents are accessed. This new implementation of a management interface allows for the user to react to timed-out transactions, and also allows for cancellation of in-progress transactions.
2009-08-03 16:56:56 +02:00
#define ERRFILE_ib_mi ( ERRFILE_NET | 0x00200000 )
[infiniband] Add a "communication-managed reliable connection" protocol SRP over Infiniband uses a protocol whereby data is sent via a combination of the CM private data fields and the RC queue pair itself. This seems sufficiently generic that it's worth having available as a separate protocol.
2009-08-09 12:05:21 +02:00
#define ERRFILE_ib_cmrc ( ERRFILE_NET | 0x00210000 )
[infiniband] Add support for SRP over Infiniband SRP is the SCSI RDMA Protocol. It allows for a method of SAN booting whereby the target is responsible for reading and writing data using Remote DMA directly to the initiator's memory. The software initiator merely sends and receives SCSI commands; it never has to touch the actual data.
2009-07-17 23:11:42 +02:00
#define ERRFILE_ib_srp ( ERRFILE_NET | 0x00220000 )
[802.11] Add core support for detecting and using encrypted networks Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-08-08 07:03:30 +02:00
#define ERRFILE_sec80211 ( ERRFILE_NET | 0x00230000 )
[802.11] Add support for WEP-protected networks WEP is a highly flawed cryptosystem, barely better than no encryption at all, but many people still use it. It does have the advantage of being very simple and small in code size. Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-06-24 09:37:52 +02:00
#define ERRFILE_wep ( ERRFILE_NET | 0x00240000 )
[eapol] Add basic support for 802.1X EAP over LANs EAPOL is a container protocol that can wrap either EAP packets or 802.11 EAPOL-Key frames. For cleanliness' sake, add a stub that strips the framing and sends packets off to the appropriate handler if it is compiled in. Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-08-08 07:31:25 +02:00
#define ERRFILE_eapol ( ERRFILE_NET | 0x00250000 )
[wpa] Add general support for WPA-protected 802.11 networks Modified-by: Marty Connor <mdc@etherboot.org> Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-08-08 08:03:40 +02:00
#define ERRFILE_wpa ( ERRFILE_NET | 0x00260000 )
[wpa] Add pre-shared key frontend (WPA "Personal" with just a passphrase) Modified-by: Marty Connor <mdc@etherboot.org> Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-08-08 08:05:00 +02:00
#define ERRFILE_wpa_psk ( ERRFILE_NET | 0x00270000 )
[wpa] Add TKIP backend (legacy RC4-based cryptosystem) Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-08-08 08:06:22 +02:00
#define ERRFILE_wpa_tkip ( ERRFILE_NET | 0x00280000 )
[wpa] Add CCMP backend (new AES-based cryptosystem) Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-08-08 08:07:11 +02:00
#define ERRFILE_wpa_ccmp ( ERRFILE_NET | 0x00290000 )
[lacp] Add simple LACP implementation Some switch configurations will refuse to enable our port unless we can speak LACP to inform the switch that we are alive. Add a very simple passive LACP implementation that is sufficient to convince at least Linux's bonding driver (when tested using qemu attached to a tap device enslaved to a bond device configured as "mode=802.3ad"). Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-05-10 17:30:10 +02:00
#define ERRFILE_eth_slow ( ERRFILE_NET | 0x002a0000 )
[fc] Add support for Fibre Channel devices Add support for Fibre Channel ports, peers, and upper-layer protocols, and for Fibre Channel extended link services. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-09-15 03:57:07 +02:00
#define ERRFILE_fc ( ERRFILE_NET | 0x002b0000 )
#define ERRFILE_fcels ( ERRFILE_NET | 0x002c0000 )
[fcp] Add support for the Fibre Channel Protocol The Fibre Channel Protocol provides a mechanism for transporting SCSI commands via a Fibre Channel fabric. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-09-15 04:08:47 +02:00
#define ERRFILE_fcp ( ERRFILE_NET | 0x002d0000 )
[fcoe] Add support for Fibre Channel over Ethernet Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-09-15 04:10:27 +02:00
#define ERRFILE_fcoe ( ERRFILE_NET | 0x002e0000 )
[fc] Add support for Fibre Channel name server lookups Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-11-04 04:31:15 +01:00
#define ERRFILE_fcns ( ERRFILE_NET | 0x002f0000 )
[vlan] Add support for IEEE 802.1Q VLANs Originally-implemented-by: michael-dev@fami-braun.de Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-11-19 01:23:26 +01:00
#define ERRFILE_vlan ( ERRFILE_NET | 0x00300000 )
[nfs] Add support for NFS protocol Tested-by: Robin Smidsrød <robin@smidsrod.no> Signed-off-by: Marin Hannache <git@mareo.fr> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-07-15 17:56:29 +02:00
#define ERRFILE_oncrpc ( ERRFILE_NET | 0x00310000 )
#define ERRFILE_portmap ( ERRFILE_NET | 0x00320000 )
#define ERRFILE_nfs ( ERRFILE_NET | 0x00330000 )
#define ERRFILE_nfs_open ( ERRFILE_NET | 0x00340000 )
#define ERRFILE_mount ( ERRFILE_NET | 0x00350000 )
#define ERRFILE_oncrpc_iob ( ERRFILE_NET | 0x00360000 )
[neighbour] Generalise concept of neighbour discovery Split the protocol-independent portions of arp.c into a separate file neighbour.c, to allow for sharing of functionality between IPv4+ARP and IPv6+NDP. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-09-01 17:13:58 +02:00
#define ERRFILE_neighbour ( ERRFILE_NET | 0x00370000 )
[socket] Add concept of a generalised socket address converter Add sock_aton() and sock_ntoa() to allow for parsing and transcription of arbitrary socket addresses. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-10-21 15:04:06 +02:00
#define ERRFILE_socket ( ERRFILE_NET | 0x00380000 )
[icmp] Add support for sending ICMP echo requests Merge common functionality between IPv4 and IPv6 ICMP echo handling, and add support for transmitting ICMP echo requests and delivering ICMP echo replies to a (not yet implemented) ping_rx() function. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-10-21 15:10:07 +02:00
#define ERRFILE_icmp ( ERRFILE_NET | 0x00390000 )
[ping] Add concept of a ping socket Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-10-21 15:16:10 +02:00
#define ERRFILE_ping ( ERRFILE_NET | 0x003a0000 )
[dhcpv6] Add basic support for stateful and stateless DHCPv6 Add support for the stateful and stateless variants of the DHCPv6 protocol. The resulting settings block is registered as "net<x>.dhcpv6", and DHCPv6 options can be obtained using e.g. "${net0.dhcpv6/23:ipv6}" to obtain the IPv6 DNS server address. IPv6 addresses obtained via stateful DHCPv6 are not yet applied to the network device. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-11-08 15:35:29 +01:00
#define ERRFILE_dhcpv6 ( ERRFILE_NET | 0x003b0000 )
[nfs] Rewrite NFS URI handling Get the NFS URI manipulation code out of nfs_open.c. The resulting code is now much more readable. Signed-off-by: Marin Hannache <git@mareo.fr> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-05-16 16:43:08 +02:00
#define ERRFILE_nfs_uri ( ERRFILE_NET | 0x003c0000 )
[rndis] Add generic RNDIS device abstraction RNDIS provides an abstraction of a network device on top of a generic packet transmission mechanism. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-12-11 18:13:38 +01:00
#define ERRFILE_rndis ( ERRFILE_NET | 0x003d0000 )
[peerdist] Add support for decoding PeerDist Content Information Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-04-13 13:26:05 +02:00
#define ERRFILE_pccrc ( ERRFILE_NET | 0x003e0000 )
[stp] Add support for detecting Spanning Tree Protocol non-forwarding ports A fairly common end-user problem is that the default configuration of a switch may leave the port in a non-forwarding state for a substantial length of time (tens of seconds) after link up. This can cause iPXE to time out and give up attempting to boot. We cannot force the switch to start forwarding packets sooner, since any attempt to send a Spanning Tree Protocol bridge PDU may cause the switch to disable our port (if the switch happens to have the Bridge PDU Guard feature enabled for the port). For non-ancient versions of the Spanning Tree Protocol, we can detect whether or not the port is currently forwarding and use this to inform the network device core that the link is currently blocked. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-06-25 11:04:42 +02:00
#define ERRFILE_stp ( ERRFILE_NET | 0x003f0000 )
[peerdist] Add support for constructing and decoding discovery messages Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-07-28 16:56:23 +02:00
#define ERRFILE_pccrd ( ERRFILE_NET | 0x00400000 )
[http] Rewrite HTTP core to support content encodings Rewrite the HTTP core to allow for the addition of arbitrary content encoding mechanisms, such as PeerDist and gzip. The core now exposes http_open() which can be used to create requests with an explicitly selected HTTP method, an optional requested content range, and an optional request body. A simple wrapper provides the preexisting behaviour of creating either a GET request or an application/x-www-form-urlencoded POST request (if the URI includes parameters). The HTTP SAN interface is now implemented using the generic block device translator. Individual blocks are requested using http_open() to create a range request. Server connections are now managed via a connection pool; this allows for multiple requests to the same server (e.g. for SAN blocks) to be completely unaware of each other. Repeated HTTPS connections to the same server can reuse a pooled connection, avoiding the per-connection overhead of establishing a TLS session (which can take several seconds if using a client certificate). Support for HTTP SAN booting and for the Basic and Digest authentication schemes is now optional and can be controlled via the SANBOOT_PROTO_HTTP, HTTP_AUTH_BASIC, and HTTP_AUTH_DIGEST build configuration options in config/general.h. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-08-17 14:16:26 +02:00
#define ERRFILE_httpconn ( ERRFILE_NET | 0x00410000 )
#define ERRFILE_httpauth ( ERRFILE_NET | 0x00420000 )
#define ERRFILE_httpbasic ( ERRFILE_NET | 0x00430000 )
#define ERRFILE_httpdigest ( ERRFILE_NET | 0x00440000 )
[peerdist] Add segment discovery mechanism Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-08-17 14:16:33 +02:00
#define ERRFILE_peerdisc ( ERRFILE_NET | 0x00450000 )
[peerdist] Add individual block download mechanism Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-08-17 14:16:37 +02:00
#define ERRFILE_peerblk ( ERRFILE_NET | 0x00460000 )
[peerdist] Add block download multiplexer Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-08-17 14:16:40 +02:00
#define ERRFILE_peermux ( ERRFILE_NET | 0x00470000 )
[xsigo] Add support for Xsigo virtual Ethernet (XVE) EoIB devices Add support for EoIB devices as implemented by Xsigo. Based on the public (but out-of-tree) Linux kernel drivers at https://oss.oracle.com/git/?p=linux-uek.git;a=log;h=v4.1.12-32.2.1 Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-03-09 01:27:15 +01:00
#define ERRFILE_xsigo ( ERRFILE_NET | 0x00480000 )
[ntp] Add simple NTP client Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-06-13 16:55:49 +02:00
#define ERRFILE_ntp ( ERRFILE_NET | 0x00490000 )
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
#define ERRFILE_image ( ERRFILE_IMAGE | 0x00000000 )
#define ERRFILE_elf ( ERRFILE_IMAGE | 0x00010000 )
#define ERRFILE_script ( ERRFILE_IMAGE | 0x00020000 )
#define ERRFILE_segment ( ERRFILE_IMAGE | 0x00030000 )
[efi] Add EFI image format and basic runtime environment We have EFI APIs for CPU I/O, PCI I/O, timers, console I/O, user access and user memory allocation. EFI executables are created using the vanilla GNU toolchain, with the EXE header handcrafted in assembly and relocations generated by a custom efilink utility.
2008-10-12 02:55:55 +02:00
#define ERRFILE_efi_image ( ERRFILE_IMAGE | 0x00040000 )
[image] Allow multiple embedded images This patch extends the embedded image feature to allow multiple embedded images instead of just one. gPXE now always boots the first embedded image on startup instead of doing the hardcoded DHCP boot (aka autoboot). Based heavily upon a patch by Stefan Hajnoczi <stefanha@gmail.com>.
2009-02-16 01:28:30 +01:00
#define ERRFILE_embedded ( ERRFILE_IMAGE | 0x00050000 )
[pnm] Add support for PNM images Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-11-26 17:29:30 +01:00
#define ERRFILE_pnm ( ERRFILE_IMAGE | 0x00060000 )
[png] Add support for PNG images Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-01-06 18:59:21 +01:00
#define ERRFILE_png ( ERRFILE_IMAGE | 0x00070000 )
[crypto] Add DER image format Add DER-encoded ASN.1 as an image format. There is no fixed signature for DER files. We treat an image as DER if it comprises a single valid SEQUENCE object covering the entire length of the image. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-07-28 17:18:23 +02:00
#define ERRFILE_der ( ERRFILE_IMAGE | 0x00080000 )
[crypto] Add PEM image format Add PEM-encoded ASN.1 as an image format. We accept as PEM any image containing a line starting with a "-----BEGIN" boundary marker. We allow for PEM files containing multiple ASN.1 objects, such as a certificate chain produced by concatenating individual certificate files. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-07-28 23:51:50 +02:00
#define ERRFILE_pem ( ERRFILE_IMAGE | 0x00090000 )
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
#define ERRFILE_asn1 ( ERRFILE_OTHER | 0x00000000 )
#define ERRFILE_chap ( ERRFILE_OTHER | 0x00010000 )
#define ERRFILE_aoeboot ( ERRFILE_OTHER | 0x00020000 )
#define ERRFILE_autoboot ( ERRFILE_OTHER | 0x00030000 )
#define ERRFILE_dhcpmgmt ( ERRFILE_OTHER | 0x00040000 )
#define ERRFILE_imgmgmt ( ERRFILE_OTHER | 0x00050000 )
#define ERRFILE_pxe_tftp ( ERRFILE_OTHER | 0x00060000 )
#define ERRFILE_pxe_udp ( ERRFILE_OTHER | 0x00070000 )
[crypto] Replace AES implementation Replace the AES implementation from AXTLS with a dedicated iPXE implementation which is slightly smaller and around 1000% faster. This implementation has been verified using the existing self-tests based on the NIST AES test vectors. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-07-25 01:16:32 +02:00
#define ERRFILE_aes ( ERRFILE_OTHER | 0x00080000 )
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
#define ERRFILE_cipher ( ERRFILE_OTHER | 0x00090000 )
#define ERRFILE_image_cmd ( ERRFILE_OTHER | 0x000a0000 )
#define ERRFILE_uri_test ( ERRFILE_OTHER | 0x000b0000 )
Prepare for iBFT merge when possible. iscsiboot.c contains a really, really ugly hack at present, but that doesn't hugely matter since I'm aiming to change the interface to iSCSI devices anyway within the next week.
2007-07-26 03:13:38 +02:00
#define ERRFILE_ibft ( ERRFILE_OTHER | 0x000c0000 )
Preparation for adding tls.c
2007-07-29 18:16:00 +02:00
#define ERRFILE_tls ( ERRFILE_OTHER | 0x000d0000 )
[NETDEV] Add notion of link state Add ability for network devices to flag link up/down state to the networking core. Autobooting code will now wait for link-up before attempting DHCP. IPoIB reflects the Infiniband link state as the network device link state (which is not strictly correct; we also need a succesful IPoIB IPv4 broadcast group join), but is probably more informative.
2008-04-22 18:40:50 +02:00
#define ERRFILE_ifmgmt ( ERRFILE_OTHER | 0x000e0000 )
[iSCSI] Support Windows Server 2008 direct iSCSI installation Add yet another ugly hack to iscsiboot.c, this time to allow the user to inhibit the shutdown/removal of the iSCSI INT13 device (and the network devices, since they are required for the iSCSI device to function). On the plus side, the fact that shutdown() now takes flags to differentiate between shutdown-for-exit and shutdown-for-boot means that another ugly hack (to allow returning via the PXE stack on BIOSes that have broken INT 18 calls) will be easier. I feel dirty.
2008-07-17 18:45:17 +02:00
#define ERRFILE_iscsiboot ( ERRFILE_OTHER | 0x000f0000 )
[efi] Add EFI image format and basic runtime environment We have EFI APIs for CPU I/O, PCI I/O, timers, console I/O, user access and user memory allocation. EFI executables are created using the vanilla GNU toolchain, with the EXE header handcrafted in assembly and relocations generated by a custom efilink utility.
2008-10-12 02:55:55 +02:00
#define ERRFILE_efi_pci ( ERRFILE_OTHER | 0x00100000 )
[efi] Add basic implementation of EFI SIMPLE_NETWORK_PROTOCOL This implementation is tested and working, but not currently tied in to the EFI build.
2008-10-16 06:38:23 +02:00
#define ERRFILE_efi_snp ( ERRFILE_OTHER | 0x00110000 )
[efi] Use EFI-native mechanism for accessing SMBIOS table EFI provides a copy of the SMBIOS table accessible via the EFI system table, which we should use instead of manually scanning through the F000:0000 segment.
2008-12-05 00:09:48 +01:00
#define ERRFILE_smbios ( ERRFILE_OTHER | 0x00120000 )
#define ERRFILE_smbios_settings ( ERRFILE_OTHER | 0x00130000 )
#define ERRFILE_efi_smbios ( ERRFILE_OTHER | 0x00140000 )
[dhcp] Split PXE menuing code out of dhcp.c The DHCP client code now implements only the mechanism of the DHCP and PXE Boot Server protocols. Boot Server Discovery can be initiated manually using the "pxebs" command. The menuing code is separated out into a user-level function on a par with boot_root_path(), and is entered in preference to a normal filename boot if the DHCP vendor class is "PXEClient" and the PXE boot menu option exists.
2009-01-31 08:36:05 +01:00
#define ERRFILE_pxemenu ( ERRFILE_OTHER | 0x00150000 )
[tls] Use our own ASN.1 routines for certificate parsing Use our own, more robust, ASN.1 parsing routines to extract the RSA public key from a server certificate. Remove the now-unused AXTLS ASN.1 parser.
2009-02-10 18:37:24 +01:00
#define ERRFILE_x509 ( ERRFILE_OTHER | 0x00160000 )
[login] Add "login" command and UI
2009-02-17 13:01:47 +01:00
#define ERRFILE_login_ui ( ERRFILE_OTHER | 0x00170000 )
[infiniband] Add support for SRP over Infiniband SRP is the SCSI RDMA Protocol. It allows for a method of SAN booting whereby the target is responsible for reading and writing data using Remote DMA directly to the initiator's memory. The software initiator merely sends and receives SCSI commands; it never has to touch the actual data.
2009-07-17 23:11:42 +02:00
#define ERRFILE_ib_srpboot ( ERRFILE_OTHER | 0x00180000 )
[iwmgmt] Add wireless management commands and text for common errors Add commands `iwstat' (to list 802.11-specific status information for 802.11 devices) and `iwlist' (to scan for available networks and print a list along with security information). Signed-off-by: Marty Connor <mdc@etherboot.org>
2009-08-08 05:17:50 +02:00
#define ERRFILE_iwmgmt ( ERRFILE_OTHER | 0x00190000 )
[linux] Add empty smbios There exists an smbios userspace library so implementing this is probably possible, but doesn't seem really important to have in userspace. Hence provide a dummy implementation returning an error. Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-05-26 19:04:47 +02:00
#define ERRFILE_linux_smbios ( ERRFILE_OTHER | 0x001a0000 )
[lotest] Add loopback testing commands Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-09-20 14:04:17 +02:00
#define ERRFILE_lotest ( ERRFILE_OTHER | 0x001b0000 )
[settings] Use generic option-parsing library Total cost: 75 bytes. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-11-21 17:57:58 +01:00
#define ERRFILE_config_cmd ( ERRFILE_OTHER | 0x001c0000 )
[ifmgmt] Use generic option-parsing library Total cost: 66 bytes Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-11-21 23:14:28 +01:00
#define ERRFILE_ifmgmt_cmd ( ERRFILE_OTHER | 0x001d0000 )
[fc] Use generic option-parsing library Total saving: 111 bytes. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-11-21 20:06:06 +01:00
#define ERRFILE_fcmgmt_cmd ( ERRFILE_OTHER | 0x001e0000 )
[gdb] Use generic option-parsing library Total saving: 42 bytes. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-11-21 20:29:58 +01:00
#define ERRFILE_gdbstub_cmd ( ERRFILE_OTHER | 0x001f0000 )
[autoboot] Connect SAN disk during a filename boot, if applicable For performing installations direct to a SAN target, it can be very useful to hook a SAN disk and then proceed to perform a filename boot. For example, the user may wish to hook the (empty) SAN installation disk and then boot into the OS installer via TFTP. This provides an alternative mechanism to using "keep-san" and relying on the BIOS to fall through to boot from the installation media, which is unreliable on many BIOSes. When a root-path is specified in addition to a boot filename, attempt to hook the root-path as a SAN disk before booting from the specified filename. Since the root-path may be used for non-SAN purposes (e.g. an NFS root mount point), ignore the root-path if it contains a URI scheme that we do not support. Originally-implemented-by: Jarrod Johnson <jarrod.b.johnson@gmail.com> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2011-01-27 19:48:47 +01:00
#define ERRFILE_sanboot_cmd ( ERRFILE_OTHER | 0x00200000 )
[bofm] Add core BOFM library Signed-off-by: Michael Brown <mcb30@ipxe.org>
2011-02-10 14:47:38 +01:00
#define ERRFILE_bofm ( ERRFILE_OTHER | 0x00210000 )
[prompt] Replace shell_banner() with a generic prompt() function Signed-off-by: Michael Brown <mcb30@ipxe.org>
2011-03-07 18:42:06 +01:00
#define ERRFILE_prompt ( ERRFILE_OTHER | 0x00220000 )
[settings] Use concat_args() in "set" command Signed-off-by: Michael Brown <mcb30@ipxe.org>
2011-03-22 18:29:08 +01:00
#define ERRFILE_nvo_cmd ( ERRFILE_OTHER | 0x00230000 )
[rng] Add ANS X9.82 Approved HMAC_DRBG algorithm ANS X9.82 specifies several Approved algorithms for use in a Deterministic Random Bit Generator (DRBG). One such algorithm is HMAC_DRBG, which can be implemented using the existing iPXE SHA-1 and HMAC functionality. This algorithm provides a maximum security strength of 128 bits. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-01-23 15:52:56 +01:00
#define ERRFILE_hmac_drbg ( ERRFILE_OTHER | 0x00240000 )
[rng] Add ANS X9.82 Approved DRBG mechanism ANS X9.82 specifies that an Approved DRBG must consist of an Approved algorithm wrapped inside an envelope which handles entropy gathering, prediction resistance, automatic reseeding and other housekeeping tasks. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-01-23 16:00:46 +01:00
#define ERRFILE_drbg ( ERRFILE_OTHER | 0x00250000 )
[rng] Add ANS X9.82 mandatory continuous tests ANS X9.82 specifies two mandatory continuous tests to be performed upon the noise source. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-02-20 15:02:25 +01:00
#define ERRFILE_entropy ( ERRFILE_OTHER | 0x00260000 )
[crypto] Add native RSA algorithm Add an implementation of RSA that uses the iPXE big-integer support. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-03-13 17:47:29 +01:00
#define ERRFILE_rsa ( ERRFILE_OTHER | 0x00270000 )
[rng] Add Linux entropy source using /dev/random Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-03-18 18:03:58 +01:00
#define ERRFILE_linux_entropy ( ERRFILE_OTHER | 0x00280000 )
[test] Add X.509 self-tests Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-03-18 18:27:07 +01:00
#define ERRFILE_x509_test ( ERRFILE_OTHER | 0x00290000 )
[crypto] Add support for Cryptographic Message Syntax (PKCS #7) The Cryptographic Message Syntax (PKCS#7) provides a format for encapsulating digital signatures of arbitrary binary blobs. A signature can be generated using openssl cms -sign -in <file to sign> -binary -noattr \ -signer <signer>.crt -inkey <signer>.key -certfile <CA>.crt \ -outform DER -out <signature> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-03-21 00:54:16 +01:00
#define ERRFILE_cms ( ERRFILE_OTHER | 0x002a0000 )
[image] Add the "imgtrust" and "imgverify" commands Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-03-22 14:46:38 +01:00
#define ERRFILE_imgtrust ( ERRFILE_OTHER | 0x002b0000 )
[menu] Add menu user interface Inspired-by: Robin Smidsrød <robin@smidsrod.no> Tested-by: Robin Smidsrød <robin@smidsrod.no> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-03-29 01:03:11 +02:00
#define ERRFILE_menu_ui ( ERRFILE_OTHER | 0x002c0000 )
[menu] Add menu commands Allow iPXE scripts to create menus. For example: #!ipxe menu iSCSI boot demonstration item install Install Fedora to ${root-path} item --default boot Boot from ${root-path} item shell Enter iPXE shell item exit Exit to BIOS choose label && goto ${label} :boot sanboot ${root-path} :install sanhook ${root-path} chain http://${next-server}/fedora.ipxe :shell shell :exit Inspired-by: Robin Smidsrød <robin@smidsrod.no> Tested-by: Robin Smidsrød <robin@smidsrod.no> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-03-29 01:05:22 +02:00
#define ERRFILE_menu_cmd ( ERRFILE_OTHER | 0x002d0000 )
[crypto] Add asynchronous certificate validator To allow for automatic download of cross-signing certificates and for OCSP, the validation of certificates must be an asynchronous process. Create a stub validator which uses a job-control interface to report the result of certificate validation. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-05-08 13:10:01 +02:00
#define ERRFILE_validator ( ERRFILE_OTHER | 0x002e0000 )
[crypto] Add framework for OCSP Add support for constructing OCSP queries and parsing OCSP responses. (There is no support yet for actually issuing an OCSP query via an HTTP POST.) Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-05-14 19:22:38 +02:00
#define ERRFILE_ocsp ( ERRFILE_OTHER | 0x002f0000 )
[cmdline] Add standalone "nslookup" command Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-08-30 01:21:33 +02:00
#define ERRFILE_nslookup ( ERRFILE_OTHER | 0x00300000 )
[efi] Split SNP HII functionality into a separate file Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-07-18 19:14:04 +02:00
#define ERRFILE_efi_snp_hii ( ERRFILE_OTHER | 0x00310000 )
[readline] Allow readline_history() to return a meaningful status Signed-off-by: Michael Brown <mcb30@ipxe.org>
2012-10-25 08:21:49 +02:00
#define ERRFILE_readline ( ERRFILE_OTHER | 0x00320000 )
[efi] Perform meaningful error code conversions Exploit the redefinition of iPXE error codes to include a "platform error code" to allow for meaningful conversion of EFI_STATUS values to iPXE errors and vice versa. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-04-18 22:29:53 +02:00
#define ERRFILE_efi_bofm ( ERRFILE_OTHER | 0x00330000 )
#define ERRFILE_efi_console ( ERRFILE_OTHER | 0x00340000 )
#define ERRFILE_efi_debug ( ERRFILE_OTHER | 0x00350000 )
#define ERRFILE_efi_download ( ERRFILE_OTHER | 0x00360000 )
#define ERRFILE_efi_driver ( ERRFILE_OTHER | 0x00370000 )
#define ERRFILE_efi_file ( ERRFILE_OTHER | 0x00380000 )
#define ERRFILE_efi_init ( ERRFILE_OTHER | 0x00390000 )
#define ERRFILE_efi_timer ( ERRFILE_OTHER | 0x003a0000 )
#define ERRFILE_efi_umalloc ( ERRFILE_OTHER | 0x003b0000 )
[linux] Add support for accessing PCI configuration space via /proc/bus/pci Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-07-13 12:42:40 +02:00
#define ERRFILE_linux_pci ( ERRFILE_OTHER | 0x003c0000 )
[settings] Expose PCI configuration space via settings mechanism Allow values to be read from PCI configuration space using the syntax ${pci/<busdevfn>.<offset>.<length>} where <busdevfn> is the bus:dev.fn address of the PCI device (expressed as a single integer, as returned by ${net0/busloc}), <offset> is the offset within PCI configuration space, and <length> is the length within PCI configuration space. Values are returned in reverse byte order, since PCI configuration space is little-endian by definition. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-07-09 17:03:35 +02:00
#define ERRFILE_pci_settings ( ERRFILE_OTHER | 0x003d0000 )
[cmdline] Add "poweroff" command Modified-by: Michael Brown <mcb30@ipxe.org> Signed-off-by: Marin Hannache <git@mareo.fr> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-07-13 14:31:15 +02:00
#define ERRFILE_efi_reboot ( ERRFILE_OTHER | 0x003e0000 )
[settings] Expose memory map via settings mechanism Allow memory map entries to be read using the syntax ${memmap/<region>.<properties>.<scale>} where <region> is the index of the memory region, <properties> is a bitmask where bit 0 represents the start address and bit 1 represents the length (allowing the end address to be encoded by having both bits 0 and 1 set), and <scale> is the number of bits by which to shift the result. This allows for several values of interest to be encoded. For example: ${memmap/<region>.1.0:hexraw} # 64-bit start address of <region> ${memmap/<region>.2.0:hexraw} # 64-bit length of <region>, in bytes ${memmap/<region>.3.0:hexraw} # 64-bit end address of <region> ${memmap/<region>.2.10:int32} # Length of <region>, in kB ${memmap/<region>.2.20:int32} # Length of <region>, in MB The numeric encoding is slightly more sophisticated than described here, allowing a single encoding to cover multiple regions. (See the source code for details.) The primary use case for this feature is to provide the total system memory size (in MB) via the "memsize" predefined setting. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-08-12 14:42:12 +02:00
#define ERRFILE_memmap_settings ( ERRFILE_OTHER | 0x003f0000 )
[cmdline] Add "params" and "param" commands to manage form parameter lists Signed-off-by: Michael Brown <mcb30@ipxe.org>
2013-08-13 23:32:45 +02:00
#define ERRFILE_param_cmd ( ERRFILE_OTHER | 0x00400000 )
[deflate] Add support for DEFLATE decompression Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-01-01 21:17:26 +01:00
#define ERRFILE_deflate ( ERRFILE_OTHER | 0x00410000 )
[xen] Add basic support for PV-HVM domains Add basic support for Xen PV-HVM domains (detected via the Xen platform PCI device with IDs 5853:0001), including support for accessing configuration via XenStore and enumerating devices via XenBus. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-07-29 00:38:30 +02:00
#define ERRFILE_xenstore ( ERRFILE_OTHER | 0x00420000 )
#define ERRFILE_xenbus ( ERRFILE_OTHER | 0x00430000 )
#define ERRFILE_xengrant ( ERRFILE_OTHER | 0x00440000 )
[efi] Move abstract device path and handle functions to efi_utils.c Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-08-06 14:52:41 +02:00
#define ERRFILE_efi_utils ( ERRFILE_OTHER | 0x00450000 )
[efi] Wrap any images loaded by our wrapped image Propagate our modified EFI system table to any images loaded by the image that we wrap, thereby allowing us to observe boot services calls made by all subsequent EFI images. Also show details of intercepted ExitBootServices() calls. When wrapping is used, exiting boot services will almost certainly fail, but this at least allows us to see when it happens. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-08-29 14:10:18 +02:00
#define ERRFILE_efi_wrap ( ERRFILE_OTHER | 0x00460000 )
[hyperv] Add support for VMBus devices Add support for an abstraction of a VMBus device. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2014-12-11 18:23:45 +01:00
#define ERRFILE_vmbus ( ERRFILE_OTHER | 0x00470000 )
[efi] Add EFI time source Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-04-14 12:55:08 +02:00
#define ERRFILE_efi_time ( ERRFILE_OTHER | 0x00480000 )
[efi] Hold off watchdog timer while running UEFI platforms may provide a watchdog timer, which will reboot the machine if an operating system takes more than five minutes to load. This can cause long-lived iPXE downloads (or interactive shell sessions) to unexpectedly reboot. Fix by resetting the watchdog timer every ten seconds while the iPXE main processing loop continues to run. Reported-by: Bradley B Williams <bradleybwilliams@swbell.net> Reported-by: John Clark <john.r.clark.3@gmail.com> Reported-by: wdriever@gmail.com Reported-by: Charlie Beima <cbeima@indiana.edu> Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-08-03 13:39:05 +02:00
#define ERRFILE_efi_watchdog ( ERRFILE_OTHER | 0x00490000 )
[efi] Implement the EFI_PXE_BASE_CODE_PROTOCOL Many UEFI NBPs expect to find an EFI_PXE_BASE_CODE_PROTOCOL installed in addition to the EFI_SIMPLE_NETWORK_PROTOCOL. Most NBPs use the EFI_PXE_BASE_CODE_PROTOCOL only to retrieve the cached DHCP packets. This implementation has been tested with grub.efi, shim.efi, syslinux.efi, and wdsmgfw.efi. Some methods (such as Discover() and Arp()) are not used by any known NBP and so have not (yet) been implemented. Usage notes for the tested bootstraps are: - grub.efi uses EFI_PXE_BASE_CODE_PROTOCOL only to retrieve the cached DHCP packet, and uses no other methods. - shim.efi uses EFI_PXE_BASE_CODE_PROTOCOL to retrieve the cached DHCP packet and to retrieve the next NBP via the Mtftp() method. If shim.efi was downloaded via HTTP (or other non-TFTP protocol) then shim.efi will blindly call Mtftp() with an HTTP URI as the filename: this allows the next NBP (e.g. grubx64.efi) to also be transparently retrieved by HTTP. shim.efi can also use the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL to retrieve files previously loaded by "imgfetch" or similar commands in iPXE. The current implementation of shim.efi will use the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL only if it does not find an EFI_PXE_BASE_CODE_PROTOCOL; this patch therefore prevents this usage of our EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. This logic could be trivially reversed in shim.efi if needed. - syslinux.efi uses EFI_PXE_BASE_CODE_PROTOCOL only to retrieve the cached DHCP packet. Versions 6.03 and earlier have a bug which may cause syslinux.efi to attach to the wrong NIC if there are multiple NICs in the system (or if the UEFI firmware supports IPv6). - wdsmgfw.efi (ab)uses EFI_PXE_BASE_CODE_PROTOCOL to retrieve the cached DHCP packets, and to send and retrieve UDP packets via the UdpWrite() and UdpRead() methods. (This was presumably done in order to minimise the amount of benefit obtainable by switching to UEFI, by replicating all of the design mistakes present in the original PXE specification.) The EFI_DOWNGRADE_UX configuration option remains available for now, until this implementation has received more widespread testing. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-09-01 22:23:34 +02:00
#define ERRFILE_efi_pxe ( ERRFILE_OTHER | 0x004a0000 )
[efi] Expose unused USB devices via EFI_USB_IO_PROTOCOL Allow the UEFI platform firmware to provide drivers for unrecognised devices, by exposing our own implementation of EFI_USB_IO_PROTOCOL. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-09-10 18:22:03 +02:00
#define ERRFILE_efi_usb ( ERRFILE_OTHER | 0x004b0000 )
[efi] Add support for EFI_GRAPHICS_OUTPUT_PROTOCOL frame buffer consoles Signed-off-by: Michael Brown <mcb30@ipxe.org>
2015-10-05 20:19:26 +02:00
#define ERRFILE_efi_fbcon ( ERRFILE_OTHER | 0x004c0000 )
[efi] Provide access to files stored on EFI filesystems Provide access to local files via the "file://" URI scheme. There are three syntaxes: - An opaque URI with a relative path (e.g. "file:script.ipxe"). This will be interpreted as a path relative to the iPXE binary. - A hierarchical URI with a non-network absolute path (e.g. "file:/boot/script.ipxe"). This will be interpreted as a path relative to the root of the filesystem from which the iPXE binary was loaded. - A hierarchical URI with a network path in which the authority is a volume label (e.g. "file://bootdisk/script.ipxe"). This will be interpreted as a path relative to the root of the filesystem with the specified volume label. Note that the potentially desirable shell mappings (e.g. "fs0:" and "blk0:") are concepts internal to the UEFI shell binary, and do not seem to be exposed in any way to external executables. The old EFI_SHELL_PROTOCOL (which did provide access to these mappings) is no longer installed by current versions of the UEFI shell. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-03-14 16:23:42 +01:00
#define ERRFILE_efi_local ( ERRFILE_OTHER | 0x004d0000 )
[efi] Generalise EFI entropy generation to non-x86 CPUs Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-05-04 15:13:44 +02:00
#define ERRFILE_efi_entropy ( ERRFILE_OTHER | 0x004e0000 )
[cmdline] Add certificate management commands Signed-off-by: Michael Brown <mcb30@ipxe.org>
2016-08-25 16:40:27 +02:00
#define ERRFILE_cert_cmd ( ERRFILE_OTHER | 0x004f0000 )
[acpi] Expose ACPI tables via settings mechanism Allow values to be read from ACPI tables using the syntax ${acpi/<signature>.<index>.0.<offset>.<length>} where <signature> is the ACPI table signature as a 32-bit hexadecimal number (e.g. 0x41504093 for the 'APIC' signature on the MADT), <index> is the index into the array of tables matching this signature, <offset> is the byte offset within the table, and <length> is the field length in bytes. Numeric values are returned in reverse byte order, since ACPI numeric values are usually little-endian. For example: ${acpi/0x41504943.0.0.0.0} - entire MADT table in raw hex ${acpi/0x41504943.0.0.0x0a.6:string} - MADT table OEM ID ${acpi/0x41504943.0.0.0x24.4:uint32} - local APIC address Signed-off-by: Michael Brown <mcb30@ipxe.org>
2017-05-23 16:44:22 +02:00
#define ERRFILE_acpi_settings ( ERRFILE_OTHER | 0x00500000 )
Add per-file error identifiers
2007-07-24 18:11:31 +02:00
/** @} */
[build] Rename gPXE to iPXE Access to the gpxe.org and etherboot.org domains and associated resources has been revoked by the registrant of the domain. Work around this problem by renaming project from gPXE to iPXE, and updating URLs to match. Also update README, LOG and COPYRIGHTS to remove obsolete information. Signed-off-by: Michael Brown <mcb30@ipxe.org>
2010-04-19 21:16:01 +02:00
#endif /* _IPXE_ERRFILE_H */