621c2886aa
UNDI ISR: save and restore 32-bit registers
...
As written, if the if the UNDI ISR call clobbers the upper halves of
any of the GPRs (which by convention it is permitted to do, and by
paranoia should be expected to do) then nothing in the interrupt
handler will recover the state.
Additionally, save/restore %fs and %gs out of sheer paranoia - it's a
cheap enough operation, and may prevent problems due to poorly written
UNDI stacks.
2008-02-10 18:06:10 -08:00
428c6342bc
Fixes for EqualLogic iSCSI targets:
...
Allow port numbers in iSCSI redirection.
Wait for SCSI status, not just the final data-in (which may be followed
by an explicit SCSI Response PDU if the S bit is not set).
2008-02-07 22:46:26 +00:00
5e4e267177
Start restructuring pxe_tftp.c to cope with multicast (MTFTP) receives.
2008-02-02 15:59:32 +00:00
105ebec4f3
Merge commit 'laptop/master'
2008-01-22 18:57:01 +00:00
122abb50af
Merge branch 'master' of rom.etherboot.org:/pub/scm/gpxe
2008-01-22 18:53:01 +00:00
c9c8cdeb8b
Add pxe_set_cached_filename() so that pxe_tftp.c can also update the
...
stored DHCP packets.
2008-01-22 18:51:12 +00:00
84f99f781e
Use XFER_INIT() macro.
2008-01-22 18:50:24 +00:00
a2b4252d5a
Add XFER_INIT() macro.
2008-01-22 18:48:47 +00:00
f6a8158eed
Make seek information part of the xfer metadata, rather than an entirely
...
separate xfer method.
Add missing .alloc_iob entries to several xfer_interface_operations
structures.
2008-01-08 16:46:55 +00:00
74fd544101
Added the embedded pxelinux payload patch from hpa.
2008-01-08 15:51:36 +00:00
3311169707
When the DHCP file/sname fields are empty, don't allow them to override
...
their equivalent DHCP-option-specified values.
2008-01-07 13:50:32 +00:00
de29e5a39c
Use .SECONDARY instead of .PRECIOUS for bin/%.tmp targets.
2008-01-07 13:15:12 +00:00
82bae302b1
Fix off-by-one error (discovered by Shao Miller).
2008-01-07 13:12:43 +00:00
a9b8197f64
Unconditionally set utility program variables in Makefile to allow CROSS_COMPILE to work.
...
stappers and xl0 pointed out that gnu make sets some variables, so ?=
is ineffective in some cases where we use it.. Cross-compilation
requires that some variables can be overridden in the
src/$(ARCH)/Config file, so include that file _after_ utility program
variables are set.
2008-01-02 14:07:52 -05:00
af56768e98
Retain some intermediate object files, suggested by Geert Stappers and Alexey Zaytsev.
...
src/bin/%.tmp files can be useful for debugging, so let's keep them.
2007-12-28 14:33:11 -05:00
f3265b4bf8
Add preliminary support for MTFTP.
2007-12-26 18:51:20 +00:00
9d4e4dbc32
3c90x driver fix (legacy) from Geert Staapers
...
From: Geert Stappers <stappers@stappers.nl>
To: etherboot-developers@lists.sourceforge.net
Subject: [Etherboot-developers] 3c90x polling again [patch]
Date: Thu, 29 Nov 2007 09:22:36 +0100
User-Agent: Mutt/1.5.16 (2007-06-11)
Hello,
gPXE didn't work on 3COM 905C Tornado cards for me.
It did transmit the DHCP request, but it didn't see the DHCP offer.
Adding debug print statements allready solved the problem.
Attached is a patch that has a cleaner delay then print statements.
The core of it is
- for(i=0;i<40000;i++);
+ mdelay(1);
There was no research if the change is about a longer delay
or about code NOT being optimized away. It works for me :-)
Cheers
Geert Stappers
2007-12-20 11:53:00 -05:00
ff476c04e9
Fix e1000 receive tail pointer (RDT) handling
...
e1000 should now work in VMware.
2007-12-17 13:07:29 -05:00
bea8787a03
Kill off the now-obsolete *_fill_nic() functions.
2007-12-15 19:40:55 +00:00
7e8624a26f
Merge branch 'master' of rom.etherboot.org:/pub/scm/gpxe
2007-12-15 19:37:44 +00:00
5172d7b266
Autodetect whether or not we need to be using -fno-stack-protector.
2007-12-15 19:37:21 +00:00
1d7974182e
Overwrite the device descriptor's IRQ number with whatever the legacy
...
driver's probe() routine fills in in nic->irqno. This is so that
non-interrupt-capable legacy drivers which set nic->irqno=0 will end
up reporting IRQ#0 via PXENV_UNDI_GET_INFORMATION; this in turn means
that the calling PXE NBP will (should) hook the timer interrupt, and
everything will sort of work.
2007-12-15 19:32:32 +00:00
bd2607305c
Correct e1000 interrupt routine to enable on 1 disable on 0. duh.
...
The e1000_irq() routine should (per mcb30) do enable on non-zero,
disable on zero. This is not consistent in all drivers, so I'll
wait to update it when doing a global sweep.
2007-12-13 11:20:45 -05:00
1a867bfb39
Remove *_fill_nic() calls, and directly set nic->ioaddr and nic->irqno .
...
This needs to be done manually because if the irq() routine is
implemented then we want something like "nic->irqno = pci->irqno;",
else we do "nic->irqno = 0;" nic->ioaddr may also need to be set
carefully.
Also added local variables to end of many files, for emacs indentation
to match kernel style (tab does 8 space indent).
2007-12-13 11:08:40 -05:00
9747c1a486
Remove the obsolete pre-aBFT AoE boot table.
2007-12-12 14:32:02 +00:00
3ab571006e
Yet another attempt to autodetect an appropriate "echo -e".
2007-12-07 14:25:02 -06:00
27b414da81
Ignore .echocheck internal housekeeping file.
2007-12-08 00:51:24 +00:00
a8bddfe153
Another (hopefully more robust) attempt to find a usable substitute
...
for "echo -e" on the host system.
2007-12-08 00:50:57 +00:00
2c7a9e803c
Remove the (unused) option to override _prefix_link_addr,
...
_textdata_link_addr, _load_addr and _max_align in the linker scripts.
A bug in some versions of ld causes segfaults if the DEFINED() macro
is used in a linker script *and* the -Map option to ld is present.
We don't currently need to override any of these values; if we need to
do so in future then the solution will probably be to always specify
the values on the ld command line, and have the linker script not
define them at all.
2007-12-07 01:34:11 -06:00
cf895a8c7c
Avoid Makefile syntax that requires make >= 3.81.
2007-12-07 04:14:06 +00:00
3b58fc0baf
Try to fix echo-detection to work on all systems that provide any
...
suitable "echo -e" substitute.
2007-12-07 03:35:32 +00:00
1949641d10
Fix compiler warnings that appear only on OpenBSD.
2007-12-06 14:16:46 -06:00
798f7f6b8e
Kill off some warnings-problematic debug statements in ndp.c; the code
...
is non-functional anyway.
2007-12-07 01:51:08 +00:00
6b0e147e0d
Don't complain when callers provide too-short buffers for
...
PXENV_GET_CACHED_INFO. NTLDR does this.
2007-12-07 01:06:37 +00:00
698b5bc887
Fix a minor logical error in posix_io.c
2007-12-07 00:52:48 +00:00
df868476e7
Various warnings fixups for OpenBSD with gcc-3.3.5.
2007-12-07 00:11:43 +00:00
64787bad29
Fix prototype mismatch.
2007-12-06 23:35:37 +00:00
be6ada2b7b
Add missing format qualifier
2007-12-06 21:38:23 +00:00
82a3e80645
Add copyright, clean up comments a bit, remove unnecessary code.
...
Cleanups for e1000.c.
2007-12-03 01:17:41 -05:00
1de705e30f
Reallocate memory for bitmaps only when necessary.
2007-11-29 19:10:10 +00:00
423e9d72f3
udp_open_promisc() calls udp_open_common() with peer==NULL.
2007-11-28 11:56:14 +00:00
3b1efba864
Add RFC2090 TFTP multicast support.
2007-11-28 10:57:26 +00:00
f770744ee0
Quick hack to be able to accept transfers from servers that don't
...
supply options.
2007-11-25 16:06:29 +00:00
838ecba131
Provide individually cached constructed copies of DHCP packets via
...
PXENV_GET_CACHED_INFO. If we dont do this, Altiris' NBP screws up; it
relies on being able to grab pointers to each of the three packets and
then read them at will later.
2007-11-22 04:43:11 +00:00
3a2473f123
Do not fill in the BufferLimit field in struct
...
s_PXENV_GET_CACHED_INFO, because this field doesn't exist in earlier
versions of the PXE spec, and some callers don't allocate space for it.
2007-11-22 00:31:21 +00:00
b3abf25e3c
Allow DHCP server to instruct gPXE to ignore ProxyDHCP (which will
...
also avoid waiting for ProxyDHCP offers).
Also reduce the ProxyDHCP timeout, because it's already irritating me.
2007-11-21 22:10:04 +00:00
0becbf5fba
Add ProxyDHCP support.
2007-11-21 21:51:43 +00:00
fa0bd77270
Added netdev_nullify to natsemi_remove()
2007-11-21 15:45:08 +00:00
de329a36d0
Removed old e1000 driver.
2007-11-21 15:37:58 +00:00
b53ee1eb16
Merge commit 'origin/mdc-working'
2007-11-21 15:35:08 +00:00
fb809da2df
Remove some assumptions about DHCP obtaining only a single options block.
2007-11-21 04:48:18 +00:00
8d18338ae7
Add PXE-required DHCP options to DHCPDISCOVER and DHCPREQUEST packets.
2007-11-21 03:57:30 +00:00
26f3a09ccf
Add UUID to DHCP request as option 97 (if available).
2007-11-21 03:29:53 +00:00
2d60a3963f
Fixed receive instability by not enabling interrupts. duh.
...
I have successfully booted DOS via iSCSI and PXELINUX via TFTP with this
version of the e1000 driver.
2007-11-20 21:33:42 -05:00
899f5b8ab2
Added definition of a UUID and uuid_ntoa() (for debugging), and
...
implemented smbios_get_uuid().
2007-11-21 02:27:07 +00:00
68c438954d
Update SMBIOS internal API to be easier to use, and not to require
...
potentially exorbitant amounts of stack space.
2007-11-21 01:58:27 +00:00
645a752bc2
This version now transmits and receives.
...
There may still be an issue with memory handling, since it seems to
die ungracefully when ARP packets come in after loading a kernel.
Something to debug.
2007-11-20 16:23:12 -05:00
8973caa1e6
Autonegotiation fixes. NIC now autonegotiates to whatever the switch supports.
2007-11-20 12:06:22 -05:00
e41550b0ba
A version of the new e1000 driver that transmits.
...
autonegotiation still needs work. receive is not working yet.
2007-11-20 10:23:32 -05:00
89eaab79c8
Replace "Etherboot" strings with "gPXE".
2007-11-20 02:00:54 +00:00
6855c357a5
Merge branch 'master' of rom.etherboot.org:/pub/scm/gpxe
2007-11-19 20:14:49 +00:00
a1e243d504
Add bin/pci_VVVV_DDDD target to allow building ROM images without
...
needing to know the gPXE internal ROM name.
2007-11-19 20:14:20 +00:00
8ce93f0876
Fix typo.
2007-11-18 11:12:54 -05:00
e21391d7b5
Add e1000 directory to build, since the driver compiles cleanly.
2007-11-18 10:57:20 -05:00
8b0d86914b
Rename e1000_main.c to e1000.c to so we can type 'make bin/e1000.dsk' instead of 'make bin/e1000_main.dsk'
2007-11-18 10:54:42 -05:00
048a234dce
Add errfile definition for new e1000.c
2007-11-18 10:45:20 -05:00
0fea19c398
Introduce files for new e1000 driver
2007-11-18 10:31:00 -05:00
2b8f77aca1
Add src/drivers/net/e1000 as home of new e1000 driver
2007-11-18 10:28:25 -05:00
8564711c20
Move current e1000 driver files to e1000-old/ directory to avoid collisions
2007-11-18 09:58:28 -05:00
8bd670301c
Add ERRFILE information for e1000_main and e1000_hw, part of the new e1000 driver
...
It is likely we will rename e1000_main to e1000 when the new e1000 driver is debugged.
2007-11-18 09:51:21 -05:00
9a4ed0f2d5
Remove unnecessary variable.
2007-11-18 03:11:02 -05:00
c194b0c4bf
Work around a bug in the OpenSolaris iSCSI target.
...
We didn't specify values for MaxRecvDataSegmentLength and
MaxBurstLength (to save space, since we were happy with the
RFC-defined default values of 8kB and 256kB respectively). However,
the OpenSolaris target (incorrectly) assumes default values of zero
for these parameters.
The upshot was that the OpenSolaris target would get stuck in an
endless loop trying to send us the first 512-byte sector, zero bytes
at a time, and would eventually run out of memory and core-dump.
Fixed by explicitly specifying the default values for these two
parameters.
2007-11-05 13:29:05 +00:00
755cb8379d
Allow space for the kernel's real-mode .bss. Previously we weren't
...
allowing any space for this, which makes it surprising that bzImage
loading ever worked.
2007-11-04 04:27:38 +00:00
c482fef058
Add missing attribute(packed) to two structures.
2007-10-29 21:22:00 +00:00
82124ea688
Merge branch 'master' of rom.etherboot.org:/pub/scm/gpxe
2007-10-29 17:22:27 +00:00
1620b3512c
Merge branch '3leaf'
2007-10-29 17:21:58 +00:00
be7d32396f
Added one more PCI ID
2007-10-22 16:24:09 +01:00
338d45a61e
Change ROM names to lower case.
2007-10-11 00:43:21 +01:00
35ee7e4479
Ensure that empty e820 regions are skipped even at the end of the
...
memory map. (We achieve this by setting CF on the last entry if it is
zero-length; this avoids the need to look ahead to see at each entry
if the *next* entry would be both the last entry and zero-length).
This fixes the "0kB base memory" error message upon starting Windows
2003 on a SunFire X2100.
2007-10-10 20:13:34 +01:00
e445c2c07c
Ensure that empty e820 regions are skipped even at the end of the
...
memory map. (We achieve this by setting CF on the last entry if it is
zero-length; this avoids the need to look ahead to see at each entry
if the *next* entry would be both the last entry and zero-length).
This fixes the "0kB base memory" error message upon starting Windows
2003 on a SunFire X2100.
2007-10-10 20:12:25 +01:00
8069598a99
Add a missing PCI ID that is tested as working.
2007-10-10 02:07:18 +01:00
9ac0377fbb
Force a netdevice poll in net_tx() before attempting to transmit
...
packet, to work around the problem whereby small TX rings get backed
up because we haven't yet poll()ed for TX completions.
2007-10-04 14:57:33 +01:00
2303c45d65
Force a netdevice poll in net_tx() before attempting to transmit
...
packet, to work around the problem whereby small TX rings get backed
up because we haven't yet poll()ed for TX completions.
2007-10-04 14:46:56 +01:00
56550e400e
Redefine bzimage_exec_context::mem_limit to be the highest permissible
...
byte, rather than the number of permissible bytes (i.e. subtract one
from the value under the previous definition to get the value under
the new definition).
This avoids integer overflow on 64-bit kernels, where
bzhdr.initrd_addr_max may be 0xffffffffffffffff; under the old
behaviour we set mem_limit equal to initrd_addr_max+1, which meant it
ended up as zero. Kernel loads would fail with ENOBUFS.
2007-09-28 01:23:06 +01:00
14fb6ba189
Quick and very dirty hack to get r8169 driver working again, prior to
...
any rewrite.
2007-09-26 17:58:51 +01:00
ed5ff61790
Standardise DBG_PRINTF()->DBG(), and remove custom definitions for
...
DBG_PRINTF() and assert().
2007-09-26 17:38:36 +01:00
881dd8e102
Switch rm_ss and rm_sp back to being words; it'll make it less
...
confusing to read the code.
2007-09-25 20:16:32 +01:00
42d96bcb07
Don't use the "rep ss movsb" trick to copy the RM stack to the PM
...
stack; it breaks vmxassist.
2007-09-25 20:14:20 +01:00
0ed066bc50
rm_ss, rm_sp, and pm_esp don't need to be accessed from anywhere
...
outside of librm.S.
2007-09-25 19:20:38 +01:00
b8a8eea850
Minor refactoring to eliminate duplication.
2007-09-25 19:06:38 +01:00
dec325fe43
Use full protected mode for access to high memory within prefix, to
...
work around limitations in real-mode virtualisation support on Intel
VT-capable chips.
2007-09-25 18:01:15 +01:00
a7eee64506
Added more verbose memory-map debugging.
...
Added redundant call to get_memmap() in int13_boot() immediately
before jumping to boot sector, to assist in debugging.
2007-09-21 18:33:17 +01:00
0979e674bb
Added more verbose memory-map debugging.
...
Added redundant call to get_memmap() in int13_boot() immediately
before jumping to boot sector, to assist in debugging.
2007-09-21 18:27:51 +01:00
44461b1854
Merge branch 'master' into 3leaf-delivery
2007-09-21 01:27:03 +01:00
1e677b2024
Merge branch 'master' of rom.etherboot.org:/pub/scm/gpxe
2007-09-21 01:26:06 +01:00
5793dbe96f
Infinband requires longer link-layer addresses and headers than Ethernet.
2007-09-21 01:23:57 +01:00
2ee76d0c93
Added defines for Infiniband files (which can't be committed to the
...
main tree yet, but reserving the error numbers now avoids problems later).
2007-09-21 01:19:04 +01:00
1af346b531
Minor debug message improvement.
2007-09-21 01:17:46 +01:00
af303db75d
Use RFC4390 whenever hardware address exceeds 16 bytes; this allows us
...
to construct DHCP packets suitable for Infiniband.
2007-09-21 01:15:58 +01:00
9c264faa0c
Add const attribute to byte-swapping functions
2007-09-21 01:15:06 +01:00
7e3527a658
Don't get stuck in an infinite loop on negative integers!
2007-09-21 01:14:44 +01:00
db124b1255
Add fls() for non-constant values.
2007-09-21 01:14:38 +01:00
f09173326c
Moved iobuf.h assertions outside the static inline functions, so that
...
the assert message's file and line number gives some clue as to the
real location of the problem.
Added similar assertions to list.h.
2007-09-21 01:13:22 +01:00
0f60150c44
Reverted driver/net/mlx_ipoib to clean master state
2007-09-18 07:07:04 +01:00
30717896f5
IB can't afford many RX buffers, because the MTU is so large. Reduce
...
the TCP window to compensate.
2007-09-18 07:02:41 +01:00
2f23881856
Added arbel.c
2007-09-18 06:37:22 +01:00
95498fa038
Remove the last remaining visible hack.
2007-09-18 06:26:31 +01:00
982e4dd101
Separated out to a clean new drivers/infiniband directory.
2007-09-18 06:06:55 +01:00
a5ec029d24
First version that works with SELF_INIT!
2007-09-18 05:46:49 +01:00
8423b0b109
Gets most of the way through initialisation.
2007-09-18 05:39:34 +01:00
def5ae9127
Added sw2hw_mpt
2007-09-18 04:45:55 +01:00
da014080f9
INIT_HCA block now matches.
2007-09-18 04:20:41 +01:00
57bf8d9905
Seems to get through the ICM mapping process
2007-09-18 03:58:59 +01:00
4ea6223f5a
ICM allocation code in place; about to start test-and-compare runs.
2007-09-18 02:57:49 +01:00
f20cd6f721
ICM allocation code *should* now be complete.
2007-09-18 02:05:25 +01:00
af88f60228
Started with the ICM partitioning code.
2007-09-18 01:49:39 +01:00
c818d47e25
Restructured bits of initialisation (not testable at present)
2007-09-17 22:25:46 +01:00
dc3165b746
Starting the firmware directly now works.
2007-09-17 21:59:41 +01:00
0f62bcaa77
Start migrating the remaining initialisation steps.
2007-09-17 21:14:09 +01:00
f3fcb53faf
Don't use the mailboxless version of the HW2SW_CQ command; it seems to
...
crash the machine.
2007-09-17 19:47:19 +01:00
12b4cb964b
Removed more hacks, and adjusted number of queue entries for likely usage.
2007-09-17 19:17:55 +01:00
11541b1e01
Remove hacks, and fix leaving the multicast GID.
2007-09-17 19:12:06 +01:00
267a4483ab
Added an almost obscene amount of debugging and assertion code while
...
tracking down a bug that turned out to be a free_iob() used where I
needed a netdev_tx_complete(). This left the freed I/O buffer on the
net device's TX list, with bad, bad consequences later.
Also fixed the bug in question.
2007-09-17 19:01:10 +01:00
387a1a8556
Minor debug message improvement.
2007-09-17 18:57:32 +01:00
2c56ede6f8
Moved iobuf.h assertions outside the static inline functions, so that
...
the assert message's file and line number gives some clue as to the
real location of the problem.
Added similar assertions to list.h.
2007-09-17 18:38:04 +01:00
bdac591726
Some interesting packet corruption happening now.
2007-09-17 13:31:13 +01:00
2ed1acb9e9
Broadcast GID is now calculated by IPoIB layer.
2007-09-17 11:50:25 +01:00
32a7bbb1e3
Cleaned up some debug messages.
2007-09-17 10:56:21 +01:00
ab191e45db
Unicasts seem to be working. :)
2007-09-17 10:39:30 +01:00
2209090120
Dead code disabling
2007-09-17 08:41:06 +01:00
b3d3814c17
Obtains a response to the get path record!
2007-09-17 08:36:56 +01:00
e05a8cd4de
Use pkey table access to determine broadcast GID directly.
2007-09-17 06:35:21 +01:00
f6f1f2b7bb
Prepare for adding a metadata queue to IPoIB
2007-09-17 06:12:33 +01:00
440e7926fb
Dead code removal
2007-09-17 05:12:47 +01:00
4e78a53cf2
IPoIB code separated out to ipoib.c.
2007-09-17 05:04:58 +01:00
67836430e6
Read port GID directly using MAD IFC.
2007-09-17 02:54:15 +01:00
3c6a6bdc5d
Multicast join now works.
2007-09-17 00:24:44 +01:00
96d0c75c00
Now transmits packets on our own allocated IPoIB queue pair. :)
2007-09-16 22:53:57 +01:00
4ddb6570f8
Almost working with own-queue allocation.
2007-09-16 22:47:45 +01:00
7e85f0d296
create_qp() and destroy_qp() now written (but not tested).
2007-09-16 20:54:21 +01:00
251cc84ed6
Started implementing create_qp() and destroy_qp().
2007-09-16 19:03:24 +01:00
83a6cc8c9b
Don't get stuck in an infinite loop on negative integers!
2007-09-16 17:39:29 +01:00
6d15a193aa
Add fls() for non-constant values.
2007-09-16 17:36:40 +01:00
b21d4ca21e
Revert to dev_priv/owner_priv scheme, rather than container_of; it
...
makes it easier to put the generic allocation code into infiniband.c
2007-09-16 17:25:15 +01:00
e238bb1e43
destroy_cq() now implemented (not tested).
2007-09-16 14:39:51 +01:00
18edcf6634
create_cq() implemented (but not tested).
2007-09-16 14:18:17 +01:00
725a574042
Match doorbell layout to expected usage.
2007-09-16 13:10:15 +01:00
5a43293c38
Started to add code for CQ creation
2007-09-16 12:52:58 +01:00
156b409ccc
Rearrange data structures to maximise embedding (and hence minimise
...
the number of separate allocations that need to be done).
2007-09-16 04:02:20 +01:00
791f992657
Command interface now reasonably friendly.
2007-09-16 03:13:25 +01:00
bf9bd93856
First (working) draft of command interface.
2007-09-16 01:44:57 +01:00
baa885ee8e
Kill off more dead code.
2007-09-15 23:36:41 +01:00
37fc40bc8c
post_recv() now works, and we can pass data on the IPoIB queue pair
...
using entirely our own code.
2007-09-15 23:33:25 +01:00
838b972cd3
Kill off some dead code
2007-09-15 21:26:14 +01:00
31b82ea1dd
Hack up IB structures at start-of-day, instead of on each use.
2007-09-15 21:23:34 +01:00
8deef093d9
Direct polling of TX completion queue now works.
2007-09-15 20:58:29 +01:00
687afdcdd9
Add const attribute to byte-swapping functions
2007-09-15 18:44:35 +01:00
6a791649f0
Updated MLX_* accessor macros to use implicit type information.
2007-09-15 18:44:09 +01:00
a3a91fedc1
Started added poll_cq() verb.
...
Started reworking MLX_EXTRACT(), MLX_POPULATE() etc. to automatically
determine type information.
2007-09-15 15:40:35 +01:00
37a036bd48
Map the whole of physical memory
2007-09-15 03:22:04 +01:00
970951666f
arbel_post_send() has been observed to transmit a packet!
2007-09-15 02:53:05 +01:00
8b27da9de1
Gets a response out of the hardware. (An error completion, to be precise.)
2007-09-15 01:35:07 +01:00
21d4ab3ce2
Prefix arbel-specific functions etc. with arbel_
2007-09-15 00:27:09 +01:00
38a73b55c4
Now at least compiles
2007-09-15 00:19:38 +01:00
9d08b7c692
Starting to introduce an Infiniband device abstraction
2007-09-14 20:29:44 +01:00
75fbc96f75
Remove some dead code
2007-09-14 11:23:06 +01:00
08e8dfd801
Now handling TX completions in our poll loop.
2007-09-14 11:10:25 +01:00
e69863b5fb
Proof-of-concept to manually parse completion event
2007-09-14 10:18:09 +01:00
e9df4f691e
Add EX_FLD_BE()
2007-09-14 10:17:29 +01:00
da23e8d287
Start constructing a generic poll() routine.
2007-09-13 17:47:14 +01:00
30a19c3f1c
Can now both send and receive packets. LL header format not yet
...
fixed; still using a quick hack-up just to be able to pass through
data.
2007-09-13 14:43:12 +01:00
99411e36da
Added netdev_priv() to ease Linux driver compatibility.
2007-09-13 13:34:38 +01:00
eecf71e4a0
Removed file checked in accidentally
2007-09-13 12:57:25 +01:00
03c90e183f
Dump received packet, including GRH.
2007-09-13 03:15:27 +01:00
7e4e5af462
Use RFC4390 whenever hardware address exceeds 16 bytes; this allows us
...
to construct DHCP packets suitable for Infiniband.
2007-09-13 01:53:04 +01:00
771455653b
Bugfix: DHCP message type should be a one-byte option... (d'oh)
2007-09-13 01:16:23 +01:00
9e32e8e513
Now sends IP packets correctly.
2007-09-13 01:14:56 +01:00
c0d99245a9
Bugfix: DHCP message type should be a one-byte option... (d'oh)
2007-09-13 01:13:57 +01:00
7b6d11e713
Started IB driver rewrite
2007-09-12 22:17:43 +01:00
5f6439c828
Merge branch 'master' into 3leaf-rewrite
2007-09-11 15:42:17 +01:00
98de16befd
Merge branch 'master' of rom.etherboot.org:/pub/scm/gpxe
2007-09-09 13:31:38 +01:00
6f799db5bd
Use "/bin/echo -e" instead of shell builtin echo; some shells don't
...
implement the -e option.
(Thanks to Jim McQuillan for this suggestion.)
2007-09-08 23:38:17 +01:00
972f293e46
Check for correct block number in tftp_rx_data().
...
(Problem observed by Clay McClure in VMware Fusion.)
2007-09-08 19:30:25 +01:00
fbec308f41
Re-added the kpxe prefix. I have no idea when this disappeared.
2007-09-08 15:57:01 +01:00
66207bb912
Add the possibility to create .o files from arbitrary binary blobs.
2007-09-06 15:11:09 +01:00
a82e6ec2de
Added missing .kpxe prefix.
2007-09-06 15:08:41 +01:00
00d93c6dd9
Minor style fix: structure fields are generally initialised in the
...
order in which they occur.
2007-09-06 13:37:47 +01:00
14e1d3cc4d
TFTP default blocksize fix from Vampyre
2007-08-30 13:51:38 -04:00
63f0e4e796
allpxes allroms alldsks fixes from Vampyre
2007-08-30 13:08:46 -04:00
eaca053174
Add sis900 variant (patch from Vampyre)
2007-08-30 08:36:00 -04:00
74a49af4ab
Force MAC address for testing purposes
2007-08-29 20:07:41 +01:00
5d6f6fb924
Merge branch 'master' into curses
...
Conflicts:
src/include/compiler.h
src/include/readline/readline.h
created by strings branch merge. resolved.
2007-08-23 23:15:54 +02:00
746d0f8feb
Merge commit 'holger/strings'
2007-08-23 21:51:57 +01:00
b62a9ee0f4
Merge branch 'master' into 3leaf
2007-08-23 20:50:58 +01:00
01b755704a
Auto-assign drive number only if set to 0xff; almost all applications
...
require that we use drive 0x80, so it should probably be the default.
2007-08-23 20:50:24 +01:00
d078fb3cb7
Allow legacy "make bin/etherboot.%".
2007-08-22 23:10:00 +01:00
8ee7eeb407
Merge branch 'master' into 3leaf
2007-08-21 01:53:11 +01:00
f92096d180
use malloc attribute
2007-08-20 20:30:24 +02:00
bc9f960b66
use malloc attribute
2007-08-20 20:30:17 +02:00
6f0eca1400
use malloc attribute
2007-08-20 20:30:11 +02:00
8bb295e3fd
use malloc attribute
2007-08-20 20:29:58 +02:00
6f61e254dc
use malloc attribute
2007-08-20 20:29:50 +02:00
347ab9b8c2
use malloc attribute
2007-08-20 20:29:41 +02:00
c4285e148d
use malloc attribute
2007-08-20 20:29:30 +02:00
05708503e5
use malloc attribute
2007-08-20 20:29:23 +02:00
9386263433
use malloc attribute
2007-08-20 20:29:09 +02:00
68455adf37
use malloc attribute
2007-08-20 20:28:47 +02:00
dea89e8d62
use malloc attribute
2007-08-20 20:28:23 +02:00
2220e1a676
define malloc attribute
2007-08-20 20:28:11 +02:00
2e88138b06
__nonnull changes
2007-08-20 00:35:07 +02:00
a0fbce4656
__nonnull changes
2007-08-20 00:34:59 +02:00
d0867b101d
__nonnull changes
2007-08-20 00:34:46 +02:00
d2dd4b9e31
__nonnull changes
2007-08-20 00:34:39 +02:00
e1eefee16b
__nonnull changes
2007-08-20 00:34:32 +02:00
3559beeb0f
__nonnull changes
2007-08-20 00:34:17 +02:00
3c19e4a07e
__nonnull changes
2007-08-20 00:34:04 +02:00
d39e79248c
__nonnull changes
2007-08-20 00:33:55 +02:00
c5414e6d12
__nonnull changes
2007-08-20 00:33:51 +02:00
6a3ee34c18
__nonnull changes
2007-08-20 00:32:51 +02:00
e7114f1215
__nonnull changes
2007-08-20 00:32:36 +02:00
3859abb7de
define __nonnull
2007-08-19 22:51:17 +02:00
e8b8991b84
define __pure and __const
2007-08-19 22:50:48 +02:00
a45a145b8c
Added error IDs for all files in drivers/net; they're likely to need them.
2007-08-19 00:29:43 +01:00
db61b0a577
Added error IDs for all files in drivers/net; they're likely to need them.
2007-08-19 00:29:27 +01:00
8ad8804f7a
Fix building on distros which use dash as the default shell.
2007-08-18 19:05:06 +01:00
800c8b014b
Add barrier() primitive (was present in Eb5.4), used by some currently
...
out-of-tree driver code.
2007-08-18 18:05:00 +01:00
a895fd0c15
Add barrier() primitive (was present in Eb5.4), used by some currently
...
out-of-tree driver code.
2007-08-18 18:04:50 +01:00
b42c5905cb
Very quick and very dirty hack to get the Mellanox code building
...
inside gPXE.
2007-08-18 18:04:18 +01:00
9d2c54735e
Started fixing up compilation warnings.
2007-08-17 20:34:48 +01:00
d0974ec716
Separate out arch-independent parts of stdint.h
2007-08-17 19:51:35 +01:00
eff8b06eff
Separate out arch-independent parts of stdint.h
2007-08-17 19:51:08 +01:00
d9bba621c8
Imported latest versions from Etherboot 5.4
2007-08-17 19:35:40 +01:00
2ff1b1245b
Use start_timer_nodelay() in protocols which rely on the retry timer
...
to generate the initial transmission; this cuts off around 0.3s per
instantiated connection.
2007-08-13 11:03:33 -07:00
0a3c2b80ea
Add start_timer_nodelay()
2007-08-13 10:59:00 -07:00
5cda460f19
Build the all-driver images by default, and print instructions for usage.
2007-08-09 20:17:35 -07:00
54bf2621ed
Add iBFT code derived from IBM document.
...
No Microsoft intellectual property was harmed in the production of
this code.
2007-08-09 17:44:20 -07:00
cfcc41d407
Set current working URI to be that of the executable image when
...
executing any image, not just a script. (This will enable pxelinux to
use relative URIs, should it wish to.)
2007-08-07 06:50:12 -07:00
950057eeed
Add PXE FILE API.
2007-08-04 01:23:37 +01:00
07f84566d5
Make read_user() non-blocking, and add select() call.
2007-08-04 01:22:52 +01:00
218651e125
Display name and status of each file as it is downloaded.
2007-08-03 12:49:21 +01:00
6e46dddc2c
Print multiple commands per line in help
2007-08-03 01:03:21 +01:00
688bac1656
Place multiboot command lines in base memory; Xen won't pick them up
...
otherwise. :(
2007-08-02 23:09:03 +01:00
710c6c1be1
Error message cleanups.
2007-08-02 20:27:50 +01:00
1ae40765a6
Set current working URI equal to script URI during script execution.
2007-08-02 20:27:19 +01:00
49009a4c1b
uri_get(NULL) and uri_put(NULL) are explicitly allowed.
2007-08-02 20:26:49 +01:00
d4947c05b2
Allow images to hold references to the originating URI.
...
Some shuffling around of the image management code; this needs tidying up.
2007-08-02 20:18:32 +01:00
9fd6a0418f
Allowed zero-cost enforced ordering of features in startup banner
...
list.
Added FEATURE() macros to most relevant (non-driver) files.
2007-08-02 14:51:03 +01:00
67afe84292
Use otherwise-useless byte in DHCP feature option as a version number
2007-08-02 04:36:00 +01:00
0acb016840
Add FEATURE() macro, plus code to display features at startup time,
...
and generate DHCP options to indicate features to DHCP server (and to
PXE NBPs).
2007-08-02 04:24:39 +01:00
7e1db201b9
strdup and strndup call malloc and are not pure
2007-08-02 03:04:44 +02:00
H. Peter Anvin