c194b0c4bf
Work around a bug in the OpenSolaris iSCSI target.
...
We didn't specify values for MaxRecvDataSegmentLength and
MaxBurstLength (to save space, since we were happy with the
RFC-defined default values of 8kB and 256kB respectively). However,
the OpenSolaris target (incorrectly) assumes default values of zero
for these parameters.
The upshot was that the OpenSolaris target would get stuck in an
endless loop trying to send us the first 512-byte sector, zero bytes
at a time, and would eventually run out of memory and core-dump.
Fixed by explicitly specifying the default values for these two
parameters.
2007-11-05 13:29:05 +00:00
755cb8379d
Allow space for the kernel's real-mode .bss. Previously we weren't
...
allowing any space for this, which makes it surprising that bzImage
loading ever worked.
2007-11-04 04:27:38 +00:00
c482fef058
Add missing attribute(packed) to two structures.
2007-10-29 21:22:00 +00:00
82124ea688
Merge branch 'master' of rom.etherboot.org:/pub/scm/gpxe
2007-10-29 17:22:27 +00:00
1620b3512c
Merge branch '3leaf'
2007-10-29 17:21:58 +00:00
be7d32396f
Added one more PCI ID
2007-10-22 16:24:09 +01:00
338d45a61e
Change ROM names to lower case.
2007-10-11 00:43:21 +01:00
35ee7e4479
Ensure that empty e820 regions are skipped even at the end of the
...
memory map. (We achieve this by setting CF on the last entry if it is
zero-length; this avoids the need to look ahead to see at each entry
if the *next* entry would be both the last entry and zero-length).
This fixes the "0kB base memory" error message upon starting Windows
2003 on a SunFire X2100.
2007-10-10 20:13:34 +01:00
e445c2c07c
Ensure that empty e820 regions are skipped even at the end of the
...
memory map. (We achieve this by setting CF on the last entry if it is
zero-length; this avoids the need to look ahead to see at each entry
if the *next* entry would be both the last entry and zero-length).
This fixes the "0kB base memory" error message upon starting Windows
2003 on a SunFire X2100.
2007-10-10 20:12:25 +01:00
8069598a99
Add a missing PCI ID that is tested as working.
2007-10-10 02:07:18 +01:00
9ac0377fbb
Force a netdevice poll in net_tx() before attempting to transmit
...
packet, to work around the problem whereby small TX rings get backed
up because we haven't yet poll()ed for TX completions.
2007-10-04 14:57:33 +01:00
2303c45d65
Force a netdevice poll in net_tx() before attempting to transmit
...
packet, to work around the problem whereby small TX rings get backed
up because we haven't yet poll()ed for TX completions.
2007-10-04 14:46:56 +01:00
56550e400e
Redefine bzimage_exec_context::mem_limit to be the highest permissible
...
byte, rather than the number of permissible bytes (i.e. subtract one
from the value under the previous definition to get the value under
the new definition).
This avoids integer overflow on 64-bit kernels, where
bzhdr.initrd_addr_max may be 0xffffffffffffffff; under the old
behaviour we set mem_limit equal to initrd_addr_max+1, which meant it
ended up as zero. Kernel loads would fail with ENOBUFS.
2007-09-28 01:23:06 +01:00
14fb6ba189
Quick and very dirty hack to get r8169 driver working again, prior to
...
any rewrite.
2007-09-26 17:58:51 +01:00
ed5ff61790
Standardise DBG_PRINTF()->DBG(), and remove custom definitions for
...
DBG_PRINTF() and assert().
2007-09-26 17:38:36 +01:00
881dd8e102
Switch rm_ss and rm_sp back to being words; it'll make it less
...
confusing to read the code.
2007-09-25 20:16:32 +01:00
42d96bcb07
Don't use the "rep ss movsb" trick to copy the RM stack to the PM
...
stack; it breaks vmxassist.
2007-09-25 20:14:20 +01:00
0ed066bc50
rm_ss, rm_sp, and pm_esp don't need to be accessed from anywhere
...
outside of librm.S.
2007-09-25 19:20:38 +01:00
b8a8eea850
Minor refactoring to eliminate duplication.
2007-09-25 19:06:38 +01:00
dec325fe43
Use full protected mode for access to high memory within prefix, to
...
work around limitations in real-mode virtualisation support on Intel
VT-capable chips.
2007-09-25 18:01:15 +01:00
a7eee64506
Added more verbose memory-map debugging.
...
Added redundant call to get_memmap() in int13_boot() immediately
before jumping to boot sector, to assist in debugging.
2007-09-21 18:33:17 +01:00
0979e674bb
Added more verbose memory-map debugging.
...
Added redundant call to get_memmap() in int13_boot() immediately
before jumping to boot sector, to assist in debugging.
2007-09-21 18:27:51 +01:00
44461b1854
Merge branch 'master' into 3leaf-delivery
2007-09-21 01:27:03 +01:00
1e677b2024
Merge branch 'master' of rom.etherboot.org:/pub/scm/gpxe
2007-09-21 01:26:06 +01:00
5793dbe96f
Infinband requires longer link-layer addresses and headers than Ethernet.
2007-09-21 01:23:57 +01:00
2ee76d0c93
Added defines for Infiniband files (which can't be committed to the
...
main tree yet, but reserving the error numbers now avoids problems later).
2007-09-21 01:19:04 +01:00
1af346b531
Minor debug message improvement.
2007-09-21 01:17:46 +01:00
af303db75d
Use RFC4390 whenever hardware address exceeds 16 bytes; this allows us
...
to construct DHCP packets suitable for Infiniband.
2007-09-21 01:15:58 +01:00
9c264faa0c
Add const attribute to byte-swapping functions
2007-09-21 01:15:06 +01:00
7e3527a658
Don't get stuck in an infinite loop on negative integers!
2007-09-21 01:14:44 +01:00
db124b1255
Add fls() for non-constant values.
2007-09-21 01:14:38 +01:00
f09173326c
Moved iobuf.h assertions outside the static inline functions, so that
...
the assert message's file and line number gives some clue as to the
real location of the problem.
Added similar assertions to list.h.
2007-09-21 01:13:22 +01:00
0f60150c44
Reverted driver/net/mlx_ipoib to clean master state
2007-09-18 07:07:04 +01:00
148055dd79
Merge branch 'master' into 3leaf-rewrite
2007-09-18 07:03:57 +01:00
30717896f5
IB can't afford many RX buffers, because the MTU is so large. Reduce
...
the TCP window to compensate.
2007-09-18 07:02:41 +01:00
2f23881856
Added arbel.c
2007-09-18 06:37:22 +01:00
95498fa038
Remove the last remaining visible hack.
2007-09-18 06:26:31 +01:00
982e4dd101
Separated out to a clean new drivers/infiniband directory.
2007-09-18 06:06:55 +01:00
a5ec029d24
First version that works with SELF_INIT!
2007-09-18 05:46:49 +01:00
8423b0b109
Gets most of the way through initialisation.
2007-09-18 05:39:34 +01:00
def5ae9127
Added sw2hw_mpt
2007-09-18 04:45:55 +01:00
da014080f9
INIT_HCA block now matches.
2007-09-18 04:20:41 +01:00
57bf8d9905
Seems to get through the ICM mapping process
2007-09-18 03:58:59 +01:00
4ea6223f5a
ICM allocation code in place; about to start test-and-compare runs.
2007-09-18 02:57:49 +01:00
f20cd6f721
ICM allocation code *should* now be complete.
2007-09-18 02:05:25 +01:00
af88f60228
Started with the ICM partitioning code.
2007-09-18 01:49:39 +01:00
c818d47e25
Restructured bits of initialisation (not testable at present)
2007-09-17 22:25:46 +01:00
dc3165b746
Starting the firmware directly now works.
2007-09-17 21:59:41 +01:00
0f62bcaa77
Start migrating the remaining initialisation steps.
2007-09-17 21:14:09 +01:00
f3fcb53faf
Don't use the mailboxless version of the HW2SW_CQ command; it seems to
...
crash the machine.
2007-09-17 19:47:19 +01:00
Michael Brown