dad5274522
Add "name" field to struct device to allow human-readable hardware device
...
names.
Add "dev" pointer in struct net_device to tie network interfaces back to a
hardware device.
Force natural alignment of data types in __table() macros. This seems to
prevent gcc from taking the unilateral decision to occasionally increase
their alignment (which screws up the table packing).
2007-01-10 04:22:09 +00:00
cc9b32c405
Remove uIP; we haven't used it for quite some time now.
2007-01-10 02:52:58 +00:00
753e156844
Allow udp_{send,sendto,sendto_via} to be called outside of the
...
udp_senddata() callback. This will simplify any UDP protocols that don't
need the temporary buffer.
2007-01-10 02:46:39 +00:00
649b789e93
DHCP transmits via specified net device, so no need to create a dummy
...
routing table entry just to fool ipv4.c any more.
2007-01-10 02:37:23 +00:00
c821a7b20d
Add udp_sendto_via() to allow e.g. DHCP to transmit without first having
...
to set up dummy routing entries.
2007-01-10 02:31:38 +00:00
f008b77ba2
Allow an explicit network device to be specified for IP-layer
...
transmissions.
2007-01-10 02:25:11 +00:00
9869659895
Add interface management commands
2007-01-10 02:04:07 +00:00
55e590ab3a
Move header file for usr/autoboot.c to include/usr
2007-01-10 02:03:20 +00:00
d24b80acf2
Added network interface management commands
2007-01-10 01:55:07 +00:00
98b6154c3e
Add "name" field to network device, to facilitate netdev commands.
2007-01-09 23:48:18 +00:00
c65fae2475
Add RX quotas to the net device poll() method. This avoids the problem
...
of alloc_pkb() exhaustion when e.g. an iSCSI-booted DOS session is left
idle for a long time at the C:\ prompt and builds up a huge packet
backlog.
2007-01-09 21:47:01 +00:00
e822bc2a90
Autopadding was sometimes overwriting the struct list_head at the end
...
of the packet buffer. Although pkbuffs are guaranteed to be at least
PKB_ZLEN bytes long, there's no guarantee that the data starts at the
start of the packet buffer.
Since we have to align data for rtl8139 anyway, and since the start of
the packet buffer is guaranteed to be aligned to PKB_ALIGN, we may as
well just shuffle the packet down so that it starts at the start of
the packet buffer. This simultaneously aligns the packet and ensures
that there is enough room for the zero-padding.
2007-01-09 21:01:55 +00:00
18e5353bed
Rename pkb_available() to pkb_tailroom() for consistency with Linux's
...
skb_tailroom(). Add pkb_headroom().
2007-01-09 20:56:31 +00:00
b7fcfe8ece
Added net device TX queue; this will be needed to support the PXE UNDI API
...
(which will need us to wait for TX completions).
Added debug autocolourisation to netdevice.c
2007-01-09 20:18:31 +00:00
8a268073a7
Move start/stop/expire debug messages to DBG2() level.
2007-01-09 17:39:52 +00:00
3c2cc59d25
Added ability to break ISR processing over several calls to poll().
...
This will allow us to implement RX quotas.
2007-01-09 17:04:10 +00:00
aa7bda7b47
Send EOI after enabling interrupt, in case the device had asserted IRQ
...
to the PIC while it was disabled.
2007-01-09 14:53:19 +00:00
a2ffe8c123
Allow boot sector to completely destroy real-mode stack, but still
...
manage to return control.
2007-01-09 14:13:59 +00:00
a9369bb503
Leave protected-mode return address on PM stack when issuing a
...
real_call(), rather than moving it to the RM stack and back again.
This allows the real-mode function to completely destroy the stack
contents, provided that it manages to return to real_call().
2007-01-09 14:13:06 +00:00
2eeb7c4fe7
Define "connected" as
...
"when SYN is ACKed and we have already received SYN", or
"when SYN is received and we have already had SYN ACKed"
rather than just
"when SYN is ACKed"
This avoids spuriously calling the connected() method when we receive
a RST,ACK in response to a SYN.
2007-01-09 05:01:22 +00:00
70cc3a164a
Reset character attributes before start of welcome banner, in case
...
it's a serial console and remembers state from the previous program
run.
2007-01-09 04:51:27 +00:00
aaca21a2b6
We can't assert that the RX engine is idle in iscsi_done(), because it
...
may be called during the RX data processor, before the RX engine
transitions back to idle. It doesn't really matter if the RX engine
isn't idle when iscsi_done() is called, because it will just pick up
where it left off on the next call. (The same is not true for the TX
engine, so keep the TX engine assertion.)
2007-01-09 04:42:23 +00:00
6ea07b9247
Use debug auto-colourisation.
2007-01-09 04:38:39 +00:00
76525294ee
Clean up connection closing and permanent failure logic.
2007-01-09 04:31:33 +00:00
2738bdf74b
Obsoleted by drivers/net/undionly.c
2007-01-09 03:22:11 +00:00
d606edb41d
Added UNDI root bus driver (which saves including all the PCI bus code,
...
UNDI ROM code etc. when you just want a "undi.kpxe"-type image).
This driver cannot be used in conjunction with any other driver (it will
crash), or in any other format than .kpxe (it just won't find any network
devices).
2007-01-09 03:20:22 +00:00
159930862f
Added missing call to undinet_remove()
2007-01-09 03:08:01 +00:00
6b09dd8244
undipci_probe() has to calculate busdevfn anyway, so we may as well pass
...
it directly to undi_load_pci().
2007-01-09 02:58:07 +00:00
ed44e3730d
Avoid erasing non-existent signatures in undi_unload()
2007-01-09 02:53:24 +00:00
a2be828a33
Avoid leaving preloaded_undi with invalid PXENV+/!PXE structure
...
addresses if the signature checks fail.
2007-01-09 02:52:28 +00:00
697bcc9d24
Since we now always unload the base code stack (even if we keep UNDI),
...
we can never return to the PXE stack and must always use INT 18.
2007-01-09 02:46:58 +00:00
f2f492a536
If preloaded device matches, use that rather than going via the UNDI
...
loader.
2007-01-09 02:32:06 +00:00
2436dac281
Populate preloaded_undi device when applicable.
2007-01-09 02:29:54 +00:00
937289cdc8
Provide storage for an undi_device structure representing the preloaded
...
UNDI stack.
2007-01-09 02:29:18 +00:00
47222d5ed8
Call PXENV_UNDI_GET_NIC_TYPE to identify NIC physical device.
...
Record all information required for populating a struct undi_device.
Make debugging output more human-readable.
2007-01-09 01:42:28 +00:00
cea2221737
Use fixed-width fields in struct undi_device, so that pxeprefix.S will be
...
able to populate the structure.
2007-01-09 01:41:26 +00:00
fbdebac5f4
Copy pxelinux's shutdown sequence: use UNLOAD_STACK without STOP_BASE,
...
and call UNDI_SHUTDOWN first to make sure the NIC is in a safe state.
2007-01-08 05:06:26 +00:00
8f8af10b22
New strategy: always stop both base code and UNDI. Always free base code
...
memory (unless we get an error while stopping the base code). Leave UNDI
resident (though stopped) for .kpxe.
Still need to add code to record the device identification parameters
prior to stopping UNDI.
2007-01-08 03:48:26 +00:00
075d79f6d4
Checking in obsolete but working memory-scanning code just for the record
2007-01-08 03:45:00 +00:00
67e824b539
Neaten up debug messages
2007-01-08 03:42:19 +00:00
f08093b0d9
Remove spurious debug message
2007-01-08 03:37:32 +00:00
f0edd11c7d
Now split out into undirom.c and undiload.c
2007-01-08 03:35:51 +00:00
07e5d4e3dc
Added any-PCI-device UNDI driver
2007-01-08 03:34:47 +00:00
66f7bcc785
Tidied up debug messages
2007-01-08 03:34:06 +00:00
79c5f0ba04
Added PCI_BASE_CLASS() macro
2007-01-08 03:32:41 +00:00
5af4918356
Added support for wildcard device/vendor ID matches
2007-01-08 03:23:38 +00:00
20c9fc407e
Remove types and prototypes now provided in the undi*.h headers.
2007-01-08 03:05:34 +00:00
a6ba48e51e
Added debugging statements
2007-01-08 03:04:54 +00:00
239965ff3b
Added missing includes
2007-01-08 03:03:42 +00:00
6115356859
Added missing declarations
2007-01-08 02:51:27 +00:00
Michael Brown