On some older EFI 1.10 implementations (observed with an old iMac), we
must use the (now obsolete) EFI_CONSOLE_CONTROL_PROTOCOL to switch the
console into text mode.
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When building with DEBUG=efi_wrap, print details of calls made by the
loaded image to selected boot services functions.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The EFI FAT filesystem driver has a bug: if a block device contains no
FAT filesystem but does have an EFI_SIMPLE_FILE_SYSTEM_PROTOCOL
instance, the FAT driver will assume that it must have previously
installed the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. This causes the FAT
driver to claim control of our device, and to refuse to stop driving
it, which prevents us from later uninstalling correctly.
Work around this bug by opening the disk I/O protocol ourselves,
thereby preventing the FAT driver from opening it.
Note that the alternative approach of opening the block I/O protocol
(and thereby in theory preventing DiskIo from attaching to the block
I/O protocol) causes an endless loop of calls to our DRIVER_STOP
method when starting the EFI shell. I have no idea why this is.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Provide a single instance of EFI_DRIVER_BINDING_PROTOCOL (attached to
our image handle); this matches the expectations scattered throughout
the EFI specification.
Open the underlying hardware device using EFI_OPEN_PROTOCOL_BY_DRIVER
and EFI_OPEN_PROTOCOL_EXCLUSIVE, to prevent other drivers from
attaching to the same device.
Do not automatically connect to devices when being loaded as a driver;
leave this task to the platform firmware (or to the user, if loading
directly from the EFI shell).
When running as an application, forcibly disconnect any existing
drivers from devices that we want to control, and reconnect them on
exit.
Provide a meaningful driver version number (based on the build
timestamp), to allow platform firmware to automatically load newer
versions of iPXE drivers if multiple drivers are present.
Include device paths within debug messages where possible, to aid in
debugging.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose the build timestamp (measured in seconds since the Epoch) and
the build name (e.g. "rtl8139.rom" or "ipxe.efi"), and provide the
product name and product short name in a single centralised location.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
With blade servers, the chassis serial number (exposed via ${serial})
may not be unique. Expose ${board-serial} as a named setting to
provide easy access to a more meaningful serial number.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some UEFI systems (observed with a Mac Pro) do not provide a loaded
image device path protocol. We don't currently use the loaded image
device path protocol for anything beyond printing a debug message, so
simply remove the code which attempts to fetch it.
Reported-by: Matt Woodward <pxematt@woodwardcc.com>
Tested-by: Matt Woodward <pxematt@woodwardcc.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some UEFI systems (observed with a Mac Pro) do not provide
EFI_HII_DATABASE_PROTOCOL. We can continue to function without
providing access to network device settings via HII, so make this
protocol optional and fall back to simply not providing any HII
protocols.
Reported-by: Matt Woodward <pxematt@woodwardcc.com>
Tested-by: Matt Woodward <pxematt@woodwardcc.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some UEFI systems (observed with a Mac Pro) do not provide
EFI_DEVICE_PATH_TO_TEXT_PROTOCOL. Since we use this protocol only for
debug messages, make it optional and fall back to printing the raw
device path bytes.
Reported-by: Matt Woodward <pxematt@woodwardcc.com>
Tested-by: Matt Woodward <pxematt@woodwardcc.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some UEFI builds will set up a timer to continuously poll any SNP
devices. This can drain packets from the network device's receive
queue before iPXE gets a chance to process them.
Use netdev_rx_[un]freeze() to explicitly indicate when we expect our
network devices to be driven via the external SNP API (as we do with
the UNDI API on the standard BIOS build), and disable the SNP API
except when receive queue processing is frozen.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE uses currticks() (along with the MAC address(es) of any network
devices) to seed the (non-cryptographic) random number generator. The
current implementation of linux_currticks() ensures that the first
call to currticks() will always return zero; this results in identical
random number sequences on each run of iPXE on a given machine. This
can cause odd-looking behaviour due to e.g. the reuse of local TCP
port numbers.
Fix by effectively rounding down the start time recorded by
linux_currticks() to the nearest whole second; this makes it unlikely
that consecutive runs of iPXE will use the exact same RNG sequence.
(Note that none of this affects the cryptographic RNG, which uses
/dev/random as a source of entropy.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow for multiple setting definitions with the same name but
different scopes and tags. For example, allow for a "filename"
setting with default scope and tag value 67 (for DHCPv4) and a
corresponding "filename" setting with IPv6 scope and tag value 59 (for
DHCPv6).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The fetch_setting() family of functions may currently modify the
definition of the specified setting (e.g. to add missing type
information). Clean up this interface by requiring callers to provide
an explicit buffer to contain the completed definition of the fetched
setting, if required.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There are currently two conflicting usages of the term "named setting"
within iPXE: one refers to predefined settings (such as show up in the
"config" UI), the other refers to settings identified by a name (such
as "net0.dhcp/ip").
Split these usages into the term "predefined setting" and "named
setting" to avoid ambiguity.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Extend the syntax for numerical SMBIOS settings from
smbios/<type>.<offset>.<length>
to
smbios/[<instance>.]<type>.<offset>.<length>
Where SMBIOS provides multiple structures with the same <type>, this
extended syntax allows for access to structures other than the first.
If <instance> is omitted then it will default to zero, giving access
to the first instance (and so matching existing behaviour).
The 16-bit SMBIOS handle (which is an alternative way to disambiguate
multiple instances of the same type of structure) can be accessed, if
required, using
smbios/<instance>.<type>.2.2:uint16
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE allows access to general SMBIOS settings using the syntax:
smbios/<type>.<offset>.<length>
This provides access to any fixed-offset field within an SMBIOS
structure. This syntax is currently overloaded to interpret a zero
<length> as meaning that the byte at <offset> contains a string index;
this provides access to SMBIOS strings (which are not located at fixed
offsets).
The "OEM Strings" SMBIOS structure contains strings which are not
referenced by any fixed string index field within the structure. iPXE
currently provides no way to access these strings.
Fix by overloading the syntax for numerical SMBIOS settings to
interpret an <offset> of zero as implying that <length> contains a
literal string index. The OEM Strings can then be accessed using:
smbios/11.0.1
smbios/11.0.2
smbios/11.0.3
...
The actual byte at offset zero will always contain the structure type,
which is already known since it must be specified in order to access
the structure. There is thus no plausible existing use case for an
offset of zero; overloading the syntax in this way should therefore
not break compatibility with any existing scripts.
The corner case where both <offset> and <length> are zero is undefined
(and, for now, will simply return a "not found" error).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Create an explicit concept of "settings scope" and eliminate the magic
values used for numerical setting tags.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Exploit the redefinition of iPXE error codes to include a "platform
error code" to allow for meaningful conversion of EFI_STATUS values to
iPXE errors and vice versa.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Abstract out the ability to reboot the system to a separate reboot()
function (with platform-specific implementations), add an EFI
implementation, and make the existing "reboot" command available under
EFI.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE treats UUIDs as being in network byte order (big-endian). The
SMBIOS specification version 2.6 states that UUIDs are stored with
little-endian values in the first three fields; earlier versions did
not specify an endianness. This results in some inconsistency between
the BIOS, vendor PXE, iPXE, and operating system interpretations of
the SMBIOS UUID.
dmidecode assumes that the byte order is little-endian if and only if
the SMBIOS version is 2.6 or higher. Choose to match this behaviour.
Reported-by: Matthew Helton <mwhelton@gmail.com>
Reported-by: Alexandru Bordei <alexandru.bordei@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When iPXE is used as a UEFI driver, the UEFI PXE base code currently
provides the TCP/IP stack, network protocols, and user interface.
This represents a substantial downgrade from the standard BIOS iPXE
user experience.
Fix by installing our own EFI_LOAD_FILE_PROTOCOL implementation which
initiates the standard iPXE boot procedure. This upgrades the UEFI
iPXE user experience to match the standard BIOS iPXE user experience.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose iPXE's images as a UEFI file system, allowing the booted image
to access all images downloaded by iPXE.
This functionality is complementary to the custom iPXE download
protocol. The iPXE download protocol allows a booted image to utilise
iPXE to download arbitrary URIs, but requires the booted image to
specifically support the custom iPXE download protocol. The new
functionality limits the booted image to accessing only files that
were already downloaded by iPXE (e.g. as part of a script), but can
work with any generic UEFI image (e.g. the UEFI shell). Both
protocols are provided simultaneously, and are attached to the SNP
device handle.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
EFI's device naming model requires drivers to provide names for child
devices. Allow the driver's GetControllerName() method to delegate to
an instance of EFI_COMPONENT_NAME2_PROTOCOL installed on the child
device itself (if present); this allows the SNP device to expose its
own device name via the PCI driver's GetControllerName() method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
