89bcb57201
Update ftp.c to work with Nikhil's TCP stack.
...
Remove the now-totally-obsolete sockaddr_in field from tcp.h.
2006-12-05 19:07:47 +00:00
a128b33b8b
The VPD engine is broken and can't actually handle placing VPD
...
anywhere other than offset 0 within the EEPROM, so we have to put our
settings at 0x100 instead.
2006-12-05 17:56:13 +00:00
4c3e0fede5
Adjust EEPROM/flash detection to fit expected manufacturing practice.
2006-12-05 16:00:06 +00:00
6a91a03409
Added options listed in
...
http://www.microsoft.com/whdc/winlogo/hwrequirements.mspx as required
for iSCSI boot. Note that options 204-206 are listed in the document
but don't seem to be defined anywhere on the web.
2006-12-05 15:40:28 +00:00
c6060a8fea
Tidy up some more output. The command-line code needs some severe
...
overhauling, but this is not the time to do it.
2006-12-05 10:27:16 +00:00
e852f8e504
Slightly tidied up console messages.
2006-12-05 10:14:58 +00:00
cb883b3faf
Change some debugging messages to use DBG()
2006-12-05 10:01:00 +00:00
8bff0f0619
Avoid draining the keyboard buffer during gateA20_set(). It shouldn't
...
technically be necessary, because the "enable A20" command requires
only that the keyboard controller is ready to accept input (i.e. that
its input buffer is empty), and shouldn't also require that the
keyboard is ready to send output (i.e. that its output buffer is also
empty). See http://www.smsc.com/main/tools/io-bios/42i.pdf section
3.1 ("Command Invocation") for a justification.
gateA20_set() is called on every real-mode transition (in case some
idiot piece of external code such as Intel's PXE stack decided it
would be fun to re-disable A20), so draining the keyboard buffer means
that we end up losing keypresses on some systems. In particular, this
makes typing at the command line almost impossible, and causes
Etherboot to ignore Ctrl-Alt-Del.
We should really implement a gateA20_test() function to verify that
gate A20 has been correctly enabled, and think about adding other
commonly-used methods such as Fast Gate A20.
2006-12-05 09:45:39 +00:00
d041d74054
Tied NVO commands into the human-interactable settings code that I
...
completely forgot I'd written ages ago.
2006-12-05 02:40:03 +00:00
6842dd3222
Handle TargetAddress
2006-12-05 01:41:32 +00:00
67577556a2
Handle strings as complete units, instead of a byte at a time.
2006-12-05 01:08:56 +00:00
3a7d762c1c
Add iscsi_rx_buffered_data() and supporting infrastructure.
2006-12-05 00:39:05 +00:00
16b81e442f
Added more debug messages
2006-12-04 23:47:44 +00:00
d9f32726b4
Added quick and dirty commands for testing the new NVO code.
2006-12-04 23:40:35 +00:00
6b45947a59
Added debug statements
2006-12-04 23:20:56 +00:00
052ef6dc5a
Added nvs_write(). This shares a lot of code in common with nvs_read();
...
this can probably be optimised down quite a lot.
2006-12-04 22:06:54 +00:00
ab4e1dba3f
Added nvo_save()
2006-12-04 22:04:10 +00:00
cc9bcb99a0
Add the concept of a fragment list for non-volatile stored options.
2006-12-04 21:46:13 +00:00
f944737045
Fixed two logic errors that were cancelling each other out.
2006-12-04 21:12:52 +00:00
d62c83a350
Migrated etherfabric driver to using generic SPI layer.
2006-12-04 20:47:51 +00:00
2d8d21fe74
Added the generic block-splitting code to nvs.c
2006-12-04 19:06:07 +00:00
1961ba44e1
Added generic SPI protocol handler with read and write support.
2006-12-04 18:32:55 +00:00
946967f09c
Abstracted out part of the concept of an SPI device to a generalised NVS
...
device.
Separated the mechanisms of non-volatile storage access and non-volatile
stored options.
2006-12-04 18:23:06 +00:00
dc06c895fc
Changed length parameter in SPI methods to be a byte length, rather than
...
a word length.
2006-12-04 16:09:59 +00:00
931f94dca3
Generalised the SPI abstraction layer to also be able to handle interfaces
...
that don't provide the full flexibility of a bit-bashing interface.
Temporarily hacked rtl8139.c to use the new interface.
2006-12-04 15:36:51 +00:00
2e41bfd268
Force syntax-checking on assertions even in non-asserting builds.
2006-12-04 15:09:57 +00:00
3e0286dee3
Move ANSI C standard prototypes to stdlib.h; leave the gPXE-specific
...
function prototypes (e.g. malloc_dma()) in malloc.h.
2006-12-02 20:10:21 +00:00
4cd56820ea
Basic non-volatile storage support
2006-11-29 02:41:08 +00:00
70d4b4f7cf
Make the "drive number" option apply to iSCSI as well as AoE
2006-11-29 00:27:10 +00:00
3234ef1b0b
Merged changes from Solarflare
2006-11-28 13:25:23 +00:00
74c41fac06
Create "username" and "password" DHCP options, ready for placing this
...
information in NVS.
2006-11-28 02:14:20 +00:00
3f0b4d9ed8
Updated to use asynchronous operation model for iSCSI requests
...
Added CHAP authentication
2006-11-28 00:29:02 +00:00
82342e0b8f
Marked memcmp/strcmp as "pure" functions, to allow gcc to optimise
...
away code such as
if ( strcmp ( some_string, "some_value" ) != 0 ) {
DBG ( "Bad value received!" );
}
2006-11-27 23:50:24 +00:00
c4677c7e73
Implemented realloc(), and changed the semantics of malloc(0) to allow
...
for realloc(0) being a valid way to free memory.
2006-11-24 16:51:18 +00:00
6a18721ce8
Fixed off-by-one error
2006-11-22 04:54:17 +00:00
fdaddd969a
Added "name" field to digest algorithms
2006-11-21 16:14:50 +00:00
d37f82509f
Added debug statements.
...
Don't crash when called on an uninitialised chap structure; this
allows us to avoid extra checks within iscsi.c to make sure that we
receive the CHAP_XXX keys in a sensible order.
2006-11-21 16:14:17 +00:00
a9415d3da2
Reduce from 157 to 123 bytes
2006-11-21 16:01:12 +00:00
c5428303e4
Added generic CHAP layer, independent of iSCSI
2006-11-21 13:26:59 +00:00
57d539aab0
Made it temporarily possible to call MD5 routines directly from external
...
code, rather than going through the digest layer.
Removed a spurious line of constants.
2006-11-15 04:22:22 +00:00
ea97fe42dd
Note to self: do not write code late at night
2006-11-15 04:16:26 +00:00
5753f2c58b
May as well add octal support to strtoul()
2006-11-15 02:57:24 +00:00
bbfb2e02fd
Fixed endp bug in strtoul()
2006-11-15 02:54:28 +00:00
65ff5357f1
Extend strtoul() to cope with hex as well as decimal. Doesn't cope
...
with octal yet, but we can probably live without that.
2006-11-15 02:52:06 +00:00
fedc186fd7
Split login into security negotation and operational parameter
...
negotiation phases, to allow inclusion of CHAP authentication.
2006-10-03 09:17:38 +00:00
b16de6ae66
Inhibit compiler warnings on DBG() when building a non-debug object,
...
while retaining the format string checking.
2006-09-27 11:09:56 +00:00
88e38fa148
We don't actually have a stdio.h header file. Our printf() functions are
...
defined in vsprintf.h. (This may change, since vsprintf.h is a
non-standard name, but for now it's the one to use.)
There should be no need to include vsprintf.h just for DBG() statements,
since include/compiler.h forces it in for a debug build anyway.
2006-09-27 10:58:14 +00:00
6ac78f6aff
added stdio.h to includes for DBG compilation
2006-09-27 05:57:06 +00:00
1da4faa896
include stdio.h to suppress printf warning, general warnings fixups
2006-09-27 04:04:55 +00:00
757618edea
eth_ntoa and warnings cleanup
2006-09-27 03:05:21 +00:00
Michael Brown