Every other scalar integer value in struct tcp_connection is in host
byte order; change the definition of local_port to match.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
image_set_cmdline() strdup()s cmdline, which free_image() doesn't
clean up.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This bug caused .probe to fail because the NIC did not reset properly.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add NonVolatile Option (nvo) and NonVolatile Storage (nvs) support to
the myri10ge driver using the EEPROM read/write mechanism provided by
the NIC's Vendor Specific PCI capability.
The myri10ge NIC is capabile of storing 64KB or more of nonvolatile
options, but this patch advertises only 512 bytes of nvo storage
because iPXE malloc's a buffer matching the total size we advertise.
512 is plenty without wasting malloc'd memory. (The 2 other drivers
currently supporting nvo advertise 256 bytes or less.)
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Make Ctrl-D delete a setting, because the Text User Interface (tui)
previously provided no way to delete a setting. Also, update the
on-screen instructions to describe the new feature. Deleting settings
is especially important for settings stored in precious nonvolatile
storage.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Implement jump scrolling with "..." displayed where the settings list
continues off-screen, because there are now too many settings to fit
on screen in the "config ..." text user interface.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a PCI_CAP_ID_VNDR definition for the PCI standard "Vendor
Specific" capability ID.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The existence and usage of the BEV entry point is covered by the PnP
spec, not the BBS spec; the BBS spec merely describes a policy for
selecting the boot device order. iPXE should therefore check only for
a PnP BIOS in order to decide whether or not to hook INT19.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit ea12dc0 ("[build] Avoid hard-coding the path to perl")
introduced a build failure for fully clean trees (e.g. after running
"make veryclean"), since the dependency upon $(PARSEROM) now includes
a dependency upon "perl" (which doesn't exist) rather than upon
"/usr/bin/perl" (which does exist).
There should of course be no dependency upon the perl binary at all;
the dependency should be upon "./util/parserom.pl" alone.
Fix by removing the $(PERL) from the definition of Perl-based utility
paths, and adding $(PERL) at the point of usage.
Reported-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The path "/usr/bin/perl" has been hard-coded since Etherboot 5.1, for
no discernible reason. Use just "perl" instead to fix the
inconsistency and allow building on systems with Perl installed
outside of /usr/bin.
Reported-by: Gabor Z. Papp <gzp@papp.hu>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This patch removes the cfg lookup made in the r8169 driver and
replaces it with equivalent information found in the driver_data field
of the pci_device_id structure.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The handshake record in TLS can contain multiple messages.
Originally-fixed-by: Timothy Stack <tstack@vmware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Since more reference-counted structures than embedded images might
want to mark themselves unfreeable, expose a dummy ref_no_free().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
xfer_vredirect() should not be allowed to propagate to a pass-through
interface. For example, when an HTTPS connection is opened, the
redirect message should cause the TLS layer to reopen the TCP socket,
rather than causing the HTTP layer to disconnect from the TLS layer.
Fix by allowing for non-pass-through interface methods, and setting
xfer_vredirect() to be one such method.
This is slightly ugly, in that it complicates the notion of an
interface method call by adding a "pass-through" / "non-pass-through"
piece of metadata. However, the only current user of xfer_vredirect()
is iscsi.c, which uses it only because we don't yet have an
ioctl()-style call for retrieving the underlying socket address.
The new interface infrastructure allows for such a call to be created,
at which time this sole user of xfer_vredirect() can be removed,
xfer_vredirect() can cease to be an interface method and become simply
a wrapper around xfer_vreopen(), and the concept of a non-pass-through
interface method can be reverted.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove data-xfer as an interface type, and replace data-xfer
interfaces with generic interfaces supporting the data-xfer methods.
Filter interfaces (as used by the TLS layer) are handled using the
generic pass-through interface capability. A side-effect of this is
that deliver_raw() no longer exists as a data-xfer method. (In
practice this doesn't lose any efficiency, since there are no
instances within the current codebase where xfer_deliver_raw() is used
to pass data to an interface supporting the deliver_raw() method.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove name-resolution as an interface type, and replace
name-resolution interfaces with generic interfaces supporting the
resolv_done() method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove job-control as an interface type, and replace job-control
interfaces with generic interfaces supporting the close() method.
(Both done() and kill() are absorbed into the function of close();
kill() is merely close(-ECANCELED).)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
We have several types of object interface at present (data-xfer, job
control, name resolution), and there is some duplication of
functionality between them. For example, job_done(), job_kill() and
xfer_close() are almost isomorphic to each other.
This updated version of the object interface mechanism allows for each
interface to export an arbitrary list of supported operations.
Advantages include:
Operations methods now receive a pointer to the object, rather than
a pointer to the interface. This allows an object to, for example,
implement a single close() method that can handle close() operations
from any of its exposed interfaces.
The close() operation is implemented as a generic operation (rather
than having specific variants for data-xfer, job control, etc.).
This will allow functions such as monojob_wait() to be used to wait
for e.g. a name resolution to complete.
The amount of boilerplate code required in objects is reduced, not
least because it is no longer necessary to include per-interface
methods that simply use container_of() to derive a pointer to the
object and then tail-call to a common per-object method.
The cost of adding new operations is reduced; adding a new data-xfer
operation such as stat() no longer incurs the penalty of adding a
.stat member to the operations table of all existing data-xfer
interfaces.
The data-xfer, job control and name resolution interfaces have not yet
been updated to use the new interface mechanism, but the code will
still compile and run.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Standardise on using timer_init() to initialise an embedded retry
timer, to match the coding style used by other embedded objects.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Standardise on using ref_init() to initialise an embedded reference
count, to match the coding style used by other embedded objects.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This patch replaces the old pcnet32 driver with a new one that
uses iPXE's API.
Signed-off-by: Andrei Faur <da3drus@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
It is conceivable that the process may terminate during the execution
of step(). If nothing else holds a reference to the containing
object, this would cause the object to be freed prior to returning
from step().
Add a ref_get()/ref_put() around the call to ->step() to prevent this
from happening.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
After changing the driver to refill after feed, if any error occurs a
non-contiguous empty buffer will be introduced in the ring due to my
reuse-buffer-when-error implementation.
Reported-by: Marty Connor <mdc@etherboot.org>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A new driver for JMicron Ethernet controller.
Reviewed-by: Joshua Oreman <oremanj@rwcr.net>
Reviewed-by: Michael Brown <mbrown@fensystems.co.uk>
Reviewed-by: Marty Connor <mdc@etherboot.org>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a new network driver that consumes the EFI Simple Network
Protocol. Also add a bus driver that can find the Simple Network
Protocol that iPXE was loaded from; the resulting behavior is similar
to the "undionly" driver for BIOS systems.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Fix up the whitespace errors inadvertently introduced by the
last-minute rename from the internal QLogic codename to "qib7322".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
strerror() has not been able to use the PXE-only error table since
commit 9aa61ad ("Add per-file error identifiers") back in 2007.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Autodetect the BSD licence statement in EFI header files, and add a
suitable FILE_LICENCE macro to the version imported into the iPXE
tree.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Now that the PACKED macro conflict is resolved, we can use an
unmodified import of the EFI header files (using
include/ipxe/efi/import.pl).
Synchronised to EDK2 SVN revision 10556.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most of iPXE uses __attribute__((packed)) anyway, and PACKED conflicts
with an identically-named macro in the upstream EFI header files.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
See RFC 4578 for details.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The linker chooses to look for _start first and always picks
efidrvprefix.o to satisfy it (probably because it's earlier in the
archive) which causes a multiple definition error when the linker
later has to pick efiprefix.o for other symbols.
Fix by using EFI-specific TGT_LD_FLAGS with an explicit entry point.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Apart from format specifier fixes there are two changes in proper code:
- Change type of regs in skge_hw to unsigned long
- Cast result of sizeof in myri10ge to uint32_t
Both don't change anything for i386 and should be fine on x86_64.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This fixes a regression in BOOTP support; since BOOTP requests often
have the `siaddr' field set to 0.0.0.0, they would be considered
duplicates of the first zeroed-out offer slot.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This removes the need for inline safety wrappers, marginally reducing
the size penalty of weak functions, and works around an apparent
binutils bug that causes undefined weak symbols to not actually be
NULL when compiling with -fPIE (as EFI builds do).
A bug in versions of binutils prior to 2.16 (released in 2005) will
cause same-file weak definitions to not work with those
toolchains. Update the README to reflect our new dependency on
binutils >= 2.16.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Dependencies are considered in left-to-right order so the source file
needs to come first in this case.
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
On 64-bit systems with both 32-bit and 64-bit libraries installed, ld
tends to generate noisy "skipping incompatible /usr/lib/libxxx.so"
messages when building elf2efi.c.
Fix by passing --no-warn-search-mismatch to ld.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Currently, if you attempt to build 64-bit EFI binaries on a 32-bit
system without a suitable cross-compiling version of libbfd, the iPXE
build will die with a segmentation fault in elf2efi64.
Fix by properly handling the return value from bfd_check_format().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
It is permissible for a DHCP packet containing PXE options to specify
only "discovery control", instead of the more typical boot menu +
prompt options. This is the strategy used by older versions of
dnsmasq; by specifying the discovery control as PXEBS_SKIP, they cause
vendor PXE ROMs to ignore boot server discovery and just use the
filename and next-server options in the initial (Proxy)DHCP packet.
Modify iPXE to accept this behavior, to be more compatible with the
Intel firmware.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Tested-by: Kyle Kienapfel <kyle@shadowmage.org>
Modified-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
PMKID checking is an additional pre-check that helps detect invalid
passphrases before going through the full handshaking procedure. It
takes up some amount of code size, and is not necessary from a
security perspective. It also is implemented improperly by some
routers, which was causing iPXE to give spurious authentication
errors. Remove it for these reasons.
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
COMBOOT API calls set the carry flag on failure. This was not being
propagated because the COMBOOT interrupt handler used iret to return
with EFLAGS restored from the stack. This patch propagates CF before
returning from the interrupt.
Reported-by: Geoff Lywood <glywood@vmware.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE currently updates the TCP sequence number after delivering the
data to the application via xfer_deliver_iob(). If the application
responds to the received data by transmitting more data, this would
result in a stale ACK number appearing in the transmitted packet,
which potentially causes retransmissions and also gives the
undesirable appearance of violating causality (by sending a response
to a message that we claim not to have yet received).
Reported-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Microsoft WDS can end up calling PXENV_RESTART_TFTP to execute a
second-stage NBP which then exits. Specifically, wdsnbp.com uses
PXENV_RESTART_TFTP to execute pxeboot.com, which will exit if the user
does not press F12. iPXE currently treats PXENV_RESTART_TFTP as a
normal PXE API call, and so attempts to return to wdsnbp.com, which
has just been vaporised by pxeboot.com.
Use rmsetjmp/rmlongjmp to preserve the stack state as of the initial
NBP execution, and to restore this state immediately prior to
executing the NBP loaded via PXENV_RESTART_TFTP. This matches the
behaviour in the PXE spec (which says that "if TFTP is restarted,
control is never returned to the caller"), and allows pxeboot.com to
exit relatively cleanly back to iPXE.
As with all usage of setjmp/longjmp, there may be subtle corner case
bugs due to not gracefully unwinding any state accumulated by the time
of the longjmp call, but this seems to be the only viable way to
provide the specified behaviour.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some switch configurations will refuse to enable our port unless we
can speak LACP to inform the switch that we are alive. Add a very
simple passive LACP implementation that is sufficient to convince at
least Linux's bonding driver (when tested using qemu attached to a tap
device enslaved to a bond device configured as "mode=802.3ad").
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add an infrastructure allowing the prefix to provide an open_payload()
method for obtaining out-of-band access to the whole iPXE image. Add
a mechanism within this infrastructure that allows raw access to the
expansion ROM BAR by temporarily borrowing an address from a suitable
memory BAR on the same PCI card.
For cards that have a memory BAR that is at least as large as their
expansion ROM BAR, this allows large iPXE ROMs to be supported even on
systems where PMM fails, or where option ROM space pressure makes it
impossible to use PMM shrinking. The BIOS sees only a stub ROM of
approximately 3kB in size; the remainder (which can be well over 64kB)
is loaded only at the time iPXE is invoked.
As a nice side-effect, an iPXE .mrom image will continue to work even
if its PMM-allocated areas are overwritten between initialisation and
invocation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The only remaining useful function of makerom.pl is to correct the ROM
and PnP checksums; the PCI IDs are set at link time, and padding is
performed using padimg.pl.
Option::ROM already provides a facility for correcting the checksums,
so we may as well just use this instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a trailing "ok" to the "initialising devices message", to match
the visual style of the "ok" now added to the "starting execution"
message.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
It is common for system memory maps to be grotesquely unreliable
during POST. Many sanity checks have been added to the memory map
reading code, but these do not catch all problems.
Skip relocation entirely if called during POST. This should avoid the
problems typically encountered, at the cost of slightly disrupting the
memory map of an operating system booted via iPXE when iPXE was
entered during POST. Since this is a very rare special case (used,
for example, when reflashing an experimental ROM that would otherwise
prevent the system from completing POST), this is an acceptable cost.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some BIOSes (at least some AMI BIOSes) tend to refuse to allocate a
single area large enough to hold both the iPXE image source and the
temporary decompression area, despite promising a largest available
PMM memory block of several megabytes. This causes ROM image
shrinking to fail on these BIOSes, with undesirable consequences:
other option ROMs may be disabled due to shortage of option ROM space,
and the iPXE ROM may itself be corrupted by a further BIOS bug (again,
observed on an AMI BIOS) which causes large ROMs to end up overlapping
reserved areas of memory. This can potentially render a system
unbootable via any means.
Increase the chances of a successful PMM allocation by dropping the
alignment requirement (which is redundant now that we can enable A20
from within the prefix); this allows us to reduce the allocation size
from 2MB down to only the required size.
Increase the chances still further by using two separate allocations:
one to hold the image source (i.e. the copy of the ROM before being
shrunk) and the other to act as the decompression area. This allows
ROM image shrinking to take place even on systems that fail to
allocate enough memory for the temporary decompression area.
Improve the behaviour of iPXE in systems with multiple iPXE ROMs by
sharing PMM allocations where possible. Image source areas can be
shared with any iPXE ROMs with a matching build identifier, and the
temporary decompression area can be shared with any iPXE ROMs with the
same uncompressed size (rounded up to the nearest 128kB).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use INT 15,88 to find a suitable temporary decompression area, rather
than a fixed address. This hopefully gives us a better chance of not
treading on any PMM-allocated areas, in BIOSes where PMM support
exists but tends not to give us the large blocks that we ask for.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Always call INT 15,88 even if we don't use the result. This allows
DEBUG=memmap to show the complete result set returned by all of the
INT 15 memory-map calls.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Randomly generate a 32-bit build identifier that can be used to
identify identical iPXE ROMs when multiple such ROMs are present in a
system (e.g. when a multi-function NIC exposes the same iPXE ROM image
via each function's expansion ROM BAR).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The existing "iPXE starting execution" message indicates that the BEV
(or INT19) was invoked, but gives no indication on whether or not the
iPXE source was successfully retrieved (e.g. from PMM). Split the
"starting execution message" into "starting execution...ok"; the "ok"
indicates that the main iPXE body was successfully decompressed and
relocated.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Now that we can use odd megabytes, there is no particular need to use
an even megabyte as the fallback temporary load point.
Note that the old warnings about avoiding 2MB pre-date our ability to
cooperate with other PXE ROMs by using PMM.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE is now capable of operating in odd megabytes of memory, so remove
the obsolete code enforcing an even-megabyte constraint.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use the shared code in libflat to perform the A20 transitions
automatically on each transition from real to protected mode. This
allows us to remove all explicit calls to gateA20_set().
The old warnings about avoiding automatically enabling A20 are
essentially redundant; they date back to the time when we would always
start hammering the keyboard controller without first checking to see
if gate A20 was already enabled (which it almost always is).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE currently insists on residing in an even megabyte. This imposes
undesirably severe constraints upon our PMM allocation strategy, and
limits our options for mechanisms to access ROMs greater than 64kB in
size.
Add A20 handling code to libflat so that prefixes are able to access
memory even in odd megabytes.
The algorithms and tuning parameters in the new A20 handling code are
based upon a mixture of the existing iPXE A20 code and the A20 code
from the 2.6.32 Linux kernel.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The flatten_real_mode routine is not needed until after decompressing
.text16.early, and currently performs various contortions to
compensate for the fact that .prefix may not be writable. Move
flatten_real_mode to .text16.early to save on (compressed) binary size
and simplify the code.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a section .text16.early which is always kept inline with the
prefix. This will allow for some code sharing between the .prefix and
.text16 sections.
Note that the simple solution of just prepending the .prefix section
to the .text16 section will not work, because a bug in Wyse Streaming
Manager server (WLDRM13.BIN) requires us to place a dummy PXENV+ entry
point at the start of .text16.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use flat real mode rather than 16-bit protected mode for access to
high memory during installation. This simplifies the code by reducing
the number of CPU modes we need to think about, and also increases the
amount of code in common between the normal and (somewhat
hypothetical) KEEP_IT_REAL methods of operation.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When returning to real mode, set 4GB segment limits instead of 64kB
limits. This change improves our chances of successfully returning to
a PMM-capable BIOS aftering entering iPXE during POST; the BIOS will
have set up flat real mode before calling our initialisation point,
and may be disconcerted if we then return in genuine real mode.
This change is unlikely to break anything, since any code that might
potentially access beyond 64kB must use addr32 prefixes to do so; if
this is the case then it is almost certainly code written to expect
flat real mode anyway.
Note that it is not possible to restore the real-mode segment limits
to their original values, since it is not possible to know which
protected-mode segment descriptor was originally used to initialise
the limit portion of the segment register.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The .hrom prefix provides an experimental mechanism for reducing
option ROM space usage on systems where PMM allocation fails, by
pretending that PMM allocation succeeded and gave us an address fixed
at compilation time. This is unreliable, and potentially dangerous.
In particular, when multiple gPXE ROMs are present in a system, each
gPXE ROM will assume ownership of the same fixed address, resulting in
undefined behaviour.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The .xrom prefix provides an experimental mechanism for loading ROM
images greater than 64kB in size by mapping the expansion ROM BAR in
at a hopefully-unused address. This is unreliable, and potentially
dangerous. In particular, there is no guarantee that any PCI bridges
between the CPU and the device will respond to accesses for the
"unused" memory region that is chosen, and it is possible that the
process of scanning for the "unused" memory region may end up issuing
reads to other PCI devices. If this ends up trampling on a register
with read side-effects belonging to an unrelated PCI device, this may
cause undefined behaviour.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain. Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.
Also update README, LOG and COPYRIGHTS to remove obsolete information.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Christopher Armenio reported link detection problems with an
integrated eepro100 NIC. Thomas Miletich removed link detection code
from the eepro100 driver and verified that the driver continued to
function. Christopher verified Thomas' patch on his integrated
eepro100 NIC.
Reported-by: Christopher Armenio <christopher.armenio@resquared.com>
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
In building gpxe for openSUSE Factory (part of kvm package), there were
a few problems identified by the compiler. This patch addresses them.
Signed-off-by: Bruce Rogers <brogers@novell.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Marty Connor <mdc@etherboot.org>
Include config/local/$file in config/$file where it makes sense and
create empty local configs during build if not present.
Modified-by: Michael Brown <mcb30@etherboot.org>
Signed-off-by: Michael Brown <mcb30@etherboot.org>
gPXE currently overwrites the filename stored in the cached DHCP
packets when a call to PXENV_TFTP_READ_FILE or PXENV_RESTART_TFTP is
made. This code has existed for many years as a workaround for RIS,
which seemed to require that this be done.
pxe_set_cached_filename() causes problems with the Bootix NBP, and a
recent test demonstrates that RIS will complete successfully even with
pxe_set_cached_filename() removed. There have been many changes to
the DHCP and PXE logic since this code was first added, and it is
quite plausible that it was masking a bug that no longer exists.
Reported-by: Alex Zeffertt <alex.zeffertt@eu.citrix.com>
Debugged-by: Shao Miller <Shao.Miller@yrdsb.edu.on.ca>
Signed-off-by: Michael Brown <mcb30@etherboot.org>
