1009 lines
27 KiB
C
Executable File
1009 lines
27 KiB
C
Executable File
/**************************************************************************
|
|
* ns83820.c: Etherboot device driver for the National Semiconductor 83820
|
|
* Written 2004 by Timothy Legge <tlegge@rogers.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Portions of this code based on:
|
|
* ns83820.c by Benjamin LaHaise with contributions
|
|
* for Linux kernel 2.4.x.
|
|
*
|
|
* Linux Driver Version 0.20, 20020610
|
|
*
|
|
* This development of this Etherboot driver was funded by:
|
|
*
|
|
* NXTV: http://www.nxtv.com/
|
|
*
|
|
* REVISION HISTORY:
|
|
* ================
|
|
*
|
|
* v1.0 02-16-2004 timlegge Initial port of Linux driver
|
|
* v1.1 02-19-2004 timlegge More rohbust transmit and poll
|
|
*
|
|
* Indent Options: indent -kr -i8
|
|
***************************************************************************/
|
|
|
|
/* to get some global routines like printf */
|
|
#include "etherboot.h"
|
|
/* to get the interface to the body of the program */
|
|
#include "nic.h"
|
|
/* to get the PCI support functions, if this is a PCI NIC */
|
|
#include "pci.h"
|
|
|
|
#if ARCH == ia64 /* Support 64-bit addressing */
|
|
#define USE_64BIT_ADDR
|
|
#endif
|
|
|
|
//#define DDEBUG
|
|
#ifdef DDEBUG
|
|
#define dprintf(x) printf x
|
|
#else
|
|
#define dprintf(x)
|
|
#endif
|
|
|
|
#define HZ 100
|
|
|
|
/* Condensed operations for readability. */
|
|
#define virt_to_le32desc(addr) cpu_to_le32(virt_to_bus(addr))
|
|
#define le32desc_to_virt(addr) bus_to_virt(le32_to_cpu(addr))
|
|
|
|
/* NIC specific static variables go here */
|
|
|
|
/* Global parameters. See MODULE_PARM near the bottom. */
|
|
// static int ihr = 2;
|
|
static int reset_phy = 0;
|
|
static int lnksts = 0; /* CFG_LNKSTS bit polarity */
|
|
|
|
#if defined(CONFIG_HIGHMEM64G) || defined(__ia64__)
|
|
#define USE_64BIT_ADDR "+"
|
|
#endif
|
|
|
|
#if defined(USE_64BIT_ADDR)
|
|
#define TRY_DAC 1
|
|
#else
|
|
#define TRY_DAC 0
|
|
#endif
|
|
|
|
/* tunables */
|
|
#define RX_BUF_SIZE 1500 /* 8192 */
|
|
|
|
/* Must not exceed ~65000. */
|
|
#define NR_RX_DESC 64
|
|
#define NR_TX_DESC 1
|
|
|
|
/* not tunable *//* Extra 6 bytes for 64 bit alignment (divisable by 8) */
|
|
#define REAL_RX_BUF_SIZE (RX_BUF_SIZE + 14 + 6) /* rx/tx mac addr + type */
|
|
|
|
#define MIN_TX_DESC_FREE 8
|
|
|
|
/* register defines */
|
|
#define CFGCS 0x04
|
|
|
|
#define CR_TXE 0x00000001
|
|
#define CR_TXD 0x00000002
|
|
/* Ramit : Here's a tip, don't do a RXD immediately followed by an RXE
|
|
* The Receive engine skips one descriptor and moves
|
|
* onto the next one!! */
|
|
#define CR_RXE 0x00000004
|
|
#define CR_RXD 0x00000008
|
|
#define CR_TXR 0x00000010
|
|
#define CR_RXR 0x00000020
|
|
#define CR_SWI 0x00000080
|
|
#define CR_RST 0x00000100
|
|
|
|
#define PTSCR_EEBIST_FAIL 0x00000001
|
|
#define PTSCR_EEBIST_EN 0x00000002
|
|
#define PTSCR_EELOAD_EN 0x00000004
|
|
#define PTSCR_RBIST_FAIL 0x000001b8
|
|
#define PTSCR_RBIST_DONE 0x00000200
|
|
#define PTSCR_RBIST_EN 0x00000400
|
|
#define PTSCR_RBIST_RST 0x00002000
|
|
|
|
#define MEAR_EEDI 0x00000001
|
|
#define MEAR_EEDO 0x00000002
|
|
#define MEAR_EECLK 0x00000004
|
|
#define MEAR_EESEL 0x00000008
|
|
#define MEAR_MDIO 0x00000010
|
|
#define MEAR_MDDIR 0x00000020
|
|
#define MEAR_MDC 0x00000040
|
|
|
|
#define ISR_TXDESC3 0x40000000
|
|
#define ISR_TXDESC2 0x20000000
|
|
#define ISR_TXDESC1 0x10000000
|
|
#define ISR_TXDESC0 0x08000000
|
|
#define ISR_RXDESC3 0x04000000
|
|
#define ISR_RXDESC2 0x02000000
|
|
#define ISR_RXDESC1 0x01000000
|
|
#define ISR_RXDESC0 0x00800000
|
|
#define ISR_TXRCMP 0x00400000
|
|
#define ISR_RXRCMP 0x00200000
|
|
#define ISR_DPERR 0x00100000
|
|
#define ISR_SSERR 0x00080000
|
|
#define ISR_RMABT 0x00040000
|
|
#define ISR_RTABT 0x00020000
|
|
#define ISR_RXSOVR 0x00010000
|
|
#define ISR_HIBINT 0x00008000
|
|
#define ISR_PHY 0x00004000
|
|
#define ISR_PME 0x00002000
|
|
#define ISR_SWI 0x00001000
|
|
#define ISR_MIB 0x00000800
|
|
#define ISR_TXURN 0x00000400
|
|
#define ISR_TXIDLE 0x00000200
|
|
#define ISR_TXERR 0x00000100
|
|
#define ISR_TXDESC 0x00000080
|
|
#define ISR_TXOK 0x00000040
|
|
#define ISR_RXORN 0x00000020
|
|
#define ISR_RXIDLE 0x00000010
|
|
#define ISR_RXEARLY 0x00000008
|
|
#define ISR_RXERR 0x00000004
|
|
#define ISR_RXDESC 0x00000002
|
|
#define ISR_RXOK 0x00000001
|
|
|
|
#define TXCFG_CSI 0x80000000
|
|
#define TXCFG_HBI 0x40000000
|
|
#define TXCFG_MLB 0x20000000
|
|
#define TXCFG_ATP 0x10000000
|
|
#define TXCFG_ECRETRY 0x00800000
|
|
#define TXCFG_BRST_DIS 0x00080000
|
|
#define TXCFG_MXDMA1024 0x00000000
|
|
#define TXCFG_MXDMA512 0x00700000
|
|
#define TXCFG_MXDMA256 0x00600000
|
|
#define TXCFG_MXDMA128 0x00500000
|
|
#define TXCFG_MXDMA64 0x00400000
|
|
#define TXCFG_MXDMA32 0x00300000
|
|
#define TXCFG_MXDMA16 0x00200000
|
|
#define TXCFG_MXDMA8 0x00100000
|
|
|
|
#define CFG_LNKSTS 0x80000000
|
|
#define CFG_SPDSTS 0x60000000
|
|
#define CFG_SPDSTS1 0x40000000
|
|
#define CFG_SPDSTS0 0x20000000
|
|
#define CFG_DUPSTS 0x10000000
|
|
#define CFG_TBI_EN 0x01000000
|
|
#define CFG_MODE_1000 0x00400000
|
|
/* Ramit : Dont' ever use AUTO_1000, it never works and is buggy.
|
|
* Read the Phy response and then configure the MAC accordingly */
|
|
#define CFG_AUTO_1000 0x00200000
|
|
#define CFG_PINT_CTL 0x001c0000
|
|
#define CFG_PINT_DUPSTS 0x00100000
|
|
#define CFG_PINT_LNKSTS 0x00080000
|
|
#define CFG_PINT_SPDSTS 0x00040000
|
|
#define CFG_TMRTEST 0x00020000
|
|
#define CFG_MRM_DIS 0x00010000
|
|
#define CFG_MWI_DIS 0x00008000
|
|
#define CFG_T64ADDR 0x00004000
|
|
#define CFG_PCI64_DET 0x00002000
|
|
#define CFG_DATA64_EN 0x00001000
|
|
#define CFG_M64ADDR 0x00000800
|
|
#define CFG_PHY_RST 0x00000400
|
|
#define CFG_PHY_DIS 0x00000200
|
|
#define CFG_EXTSTS_EN 0x00000100
|
|
#define CFG_REQALG 0x00000080
|
|
#define CFG_SB 0x00000040
|
|
#define CFG_POW 0x00000020
|
|
#define CFG_EXD 0x00000010
|
|
#define CFG_PESEL 0x00000008
|
|
#define CFG_BROM_DIS 0x00000004
|
|
#define CFG_EXT_125 0x00000002
|
|
#define CFG_BEM 0x00000001
|
|
|
|
#define EXTSTS_UDPPKT 0x00200000
|
|
#define EXTSTS_TCPPKT 0x00080000
|
|
#define EXTSTS_IPPKT 0x00020000
|
|
|
|
#define SPDSTS_POLARITY (CFG_SPDSTS1 | CFG_SPDSTS0 | CFG_DUPSTS | (lnksts ? CFG_LNKSTS : 0))
|
|
|
|
#define MIBC_MIBS 0x00000008
|
|
#define MIBC_ACLR 0x00000004
|
|
#define MIBC_FRZ 0x00000002
|
|
#define MIBC_WRN 0x00000001
|
|
|
|
#define PCR_PSEN (1 << 31)
|
|
#define PCR_PS_MCAST (1 << 30)
|
|
#define PCR_PS_DA (1 << 29)
|
|
#define PCR_STHI_8 (3 << 23)
|
|
#define PCR_STLO_4 (1 << 23)
|
|
#define PCR_FFHI_8K (3 << 21)
|
|
#define PCR_FFLO_4K (1 << 21)
|
|
#define PCR_PAUSE_CNT 0xFFFE
|
|
|
|
#define RXCFG_AEP 0x80000000
|
|
#define RXCFG_ARP 0x40000000
|
|
#define RXCFG_STRIPCRC 0x20000000
|
|
#define RXCFG_RX_FD 0x10000000
|
|
#define RXCFG_ALP 0x08000000
|
|
#define RXCFG_AIRL 0x04000000
|
|
#define RXCFG_MXDMA512 0x00700000
|
|
#define RXCFG_DRTH 0x0000003e
|
|
#define RXCFG_DRTH0 0x00000002
|
|
|
|
#define RFCR_RFEN 0x80000000
|
|
#define RFCR_AAB 0x40000000
|
|
#define RFCR_AAM 0x20000000
|
|
#define RFCR_AAU 0x10000000
|
|
#define RFCR_APM 0x08000000
|
|
#define RFCR_APAT 0x07800000
|
|
#define RFCR_APAT3 0x04000000
|
|
#define RFCR_APAT2 0x02000000
|
|
#define RFCR_APAT1 0x01000000
|
|
#define RFCR_APAT0 0x00800000
|
|
#define RFCR_AARP 0x00400000
|
|
#define RFCR_MHEN 0x00200000
|
|
#define RFCR_UHEN 0x00100000
|
|
#define RFCR_ULM 0x00080000
|
|
|
|
#define VRCR_RUDPE 0x00000080
|
|
#define VRCR_RTCPE 0x00000040
|
|
#define VRCR_RIPE 0x00000020
|
|
#define VRCR_IPEN 0x00000010
|
|
#define VRCR_DUTF 0x00000008
|
|
#define VRCR_DVTF 0x00000004
|
|
#define VRCR_VTREN 0x00000002
|
|
#define VRCR_VTDEN 0x00000001
|
|
|
|
#define VTCR_PPCHK 0x00000008
|
|
#define VTCR_GCHK 0x00000004
|
|
#define VTCR_VPPTI 0x00000002
|
|
#define VTCR_VGTI 0x00000001
|
|
|
|
#define CR 0x00
|
|
#define CFG 0x04
|
|
#define MEAR 0x08
|
|
#define PTSCR 0x0c
|
|
#define ISR 0x10
|
|
#define IMR 0x14
|
|
#define IER 0x18
|
|
#define IHR 0x1c
|
|
#define TXDP 0x20
|
|
#define TXDP_HI 0x24
|
|
#define TXCFG 0x28
|
|
#define GPIOR 0x2c
|
|
#define RXDP 0x30
|
|
#define RXDP_HI 0x34
|
|
#define RXCFG 0x38
|
|
#define PQCR 0x3c
|
|
#define WCSR 0x40
|
|
#define PCR 0x44
|
|
#define RFCR 0x48
|
|
#define RFDR 0x4c
|
|
|
|
#define SRR 0x58
|
|
|
|
#define VRCR 0xbc
|
|
#define VTCR 0xc0
|
|
#define VDR 0xc4
|
|
#define CCSR 0xcc
|
|
|
|
#define TBICR 0xe0
|
|
#define TBISR 0xe4
|
|
#define TANAR 0xe8
|
|
#define TANLPAR 0xec
|
|
#define TANER 0xf0
|
|
#define TESR 0xf4
|
|
|
|
#define TBICR_MR_AN_ENABLE 0x00001000
|
|
#define TBICR_MR_RESTART_AN 0x00000200
|
|
|
|
#define TBISR_MR_LINK_STATUS 0x00000020
|
|
#define TBISR_MR_AN_COMPLETE 0x00000004
|
|
|
|
#define TANAR_PS2 0x00000100
|
|
#define TANAR_PS1 0x00000080
|
|
#define TANAR_HALF_DUP 0x00000040
|
|
#define TANAR_FULL_DUP 0x00000020
|
|
|
|
#define GPIOR_GP5_OE 0x00000200
|
|
#define GPIOR_GP4_OE 0x00000100
|
|
#define GPIOR_GP3_OE 0x00000080
|
|
#define GPIOR_GP2_OE 0x00000040
|
|
#define GPIOR_GP1_OE 0x00000020
|
|
#define GPIOR_GP3_OUT 0x00000004
|
|
#define GPIOR_GP1_OUT 0x00000001
|
|
|
|
#define LINK_AUTONEGOTIATE 0x01
|
|
#define LINK_DOWN 0x02
|
|
#define LINK_UP 0x04
|
|
|
|
|
|
#define __kick_rx() writel(CR_RXE, ns->base + CR)
|
|
|
|
#define kick_rx() do { \
|
|
dprintf(("kick_rx: maybe kicking\n")); \
|
|
writel(virt_to_le32desc(&rx_ring[ns->cur_rx]), ns->base + RXDP); \
|
|
if (ns->next_rx == ns->next_empty) \
|
|
printf("uh-oh: next_rx == next_empty???\n"); \
|
|
__kick_rx(); \
|
|
} while(0)
|
|
|
|
|
|
#ifdef USE_64BIT_ADDR
|
|
#define HW_ADDR_LEN 8
|
|
#else
|
|
#define HW_ADDR_LEN 4
|
|
#endif
|
|
|
|
#define CMDSTS_OWN 0x80000000
|
|
#define CMDSTS_MORE 0x40000000
|
|
#define CMDSTS_INTR 0x20000000
|
|
#define CMDSTS_ERR 0x10000000
|
|
#define CMDSTS_OK 0x08000000
|
|
#define CMDSTS_LEN_MASK 0x0000ffff
|
|
|
|
#define CMDSTS_DEST_MASK 0x01800000
|
|
#define CMDSTS_DEST_SELF 0x00800000
|
|
#define CMDSTS_DEST_MULTI 0x01000000
|
|
|
|
#define DESC_SIZE 8 /* Should be cache line sized */
|
|
|
|
#ifdef USE_64BIT_ADDR
|
|
struct ring_desc {
|
|
uint64_t link;
|
|
uint64_t bufptr;
|
|
u32 cmdsts;
|
|
u32 extsts; /* Extended status field */
|
|
};
|
|
#else
|
|
struct ring_desc {
|
|
u32 link;
|
|
u32 bufptr;
|
|
u32 cmdsts;
|
|
u32 extsts; /* Extended status field */
|
|
};
|
|
#endif
|
|
|
|
/* Private Storage for the NIC */
|
|
struct ns83820_private {
|
|
u8 *base;
|
|
int up;
|
|
long idle;
|
|
u32 *next_rx_desc;
|
|
u16 next_rx, next_empty;
|
|
u32 cur_rx;
|
|
u32 *descs;
|
|
unsigned ihr;
|
|
u32 CFG_cache;
|
|
u32 MEAR_cache;
|
|
u32 IMR_cache;
|
|
int linkstate;
|
|
u16 tx_done_idx;
|
|
u16 tx_idx;
|
|
u16 tx_intr_idx;
|
|
u32 phy_descs;
|
|
u32 *tx_descs;
|
|
|
|
} nsx;
|
|
static struct ns83820_private *ns;
|
|
|
|
/* Define the TX and RX Descriptor and Buffers */
|
|
struct {
|
|
struct ring_desc tx_ring[NR_TX_DESC] __attribute__ ((aligned(8)));
|
|
unsigned char txb[NR_TX_DESC * REAL_RX_BUF_SIZE];
|
|
struct ring_desc rx_ring[NR_RX_DESC] __attribute__ ((aligned(8)));
|
|
unsigned char rxb[NR_RX_DESC * REAL_RX_BUF_SIZE]
|
|
__attribute__ ((aligned(8)));
|
|
} ns83820_bufs __shared;
|
|
#define tx_ring ns83820_bufs.tx_ring
|
|
#define rx_ring ns83820_bufs.rx_ring
|
|
#define txb ns83820_bufs.txb
|
|
#define rxb ns83820_bufs.rxb
|
|
|
|
static void phy_intr(struct nic *nic __unused)
|
|
{
|
|
static char *speeds[] =
|
|
{ "10", "100", "1000", "1000(?)", "1000F" };
|
|
u32 cfg, new_cfg;
|
|
u32 tbisr, tanar, tanlpar;
|
|
int speed, fullduplex, newlinkstate;
|
|
|
|
cfg = readl(ns->base + CFG) ^ SPDSTS_POLARITY;
|
|
if (ns->CFG_cache & CFG_TBI_EN) {
|
|
/* we have an optical transceiver */
|
|
tbisr = readl(ns->base + TBISR);
|
|
tanar = readl(ns->base + TANAR);
|
|
tanlpar = readl(ns->base + TANLPAR);
|
|
dprintf(("phy_intr: tbisr=%hX, tanar=%hX, tanlpar=%hX\n",
|
|
tbisr, tanar, tanlpar));
|
|
|
|
if ((fullduplex = (tanlpar & TANAR_FULL_DUP)
|
|
&& (tanar & TANAR_FULL_DUP))) {
|
|
|
|
/* both of us are full duplex */
|
|
writel(readl(ns->base + TXCFG)
|
|
| TXCFG_CSI | TXCFG_HBI | TXCFG_ATP,
|
|
ns->base + TXCFG);
|
|
writel(readl(ns->base + RXCFG) | RXCFG_RX_FD,
|
|
ns->base + RXCFG);
|
|
/* Light up full duplex LED */
|
|
writel(readl(ns->base + GPIOR) | GPIOR_GP1_OUT,
|
|
ns->base + GPIOR);
|
|
|
|
} else if (((tanlpar & TANAR_HALF_DUP)
|
|
&& (tanar & TANAR_HALF_DUP))
|
|
|| ((tanlpar & TANAR_FULL_DUP)
|
|
&& (tanar & TANAR_HALF_DUP))
|
|
|| ((tanlpar & TANAR_HALF_DUP)
|
|
&& (tanar & TANAR_FULL_DUP))) {
|
|
|
|
/* one or both of us are half duplex */
|
|
writel((readl(ns->base + TXCFG)
|
|
& ~(TXCFG_CSI | TXCFG_HBI)) | TXCFG_ATP,
|
|
ns->base + TXCFG);
|
|
writel(readl(ns->base + RXCFG) & ~RXCFG_RX_FD,
|
|
ns->base + RXCFG);
|
|
/* Turn off full duplex LED */
|
|
writel(readl(ns->base + GPIOR) & ~GPIOR_GP1_OUT,
|
|
ns->base + GPIOR);
|
|
}
|
|
|
|
speed = 4; /* 1000F */
|
|
|
|
} else {
|
|
/* we have a copper transceiver */
|
|
new_cfg =
|
|
ns->CFG_cache & ~(CFG_SB | CFG_MODE_1000 | CFG_SPDSTS);
|
|
|
|
if (cfg & CFG_SPDSTS1)
|
|
new_cfg |= CFG_MODE_1000;
|
|
else
|
|
new_cfg &= ~CFG_MODE_1000;
|
|
|
|
speed = ((cfg / CFG_SPDSTS0) & 3);
|
|
fullduplex = (cfg & CFG_DUPSTS);
|
|
|
|
if (fullduplex)
|
|
new_cfg |= CFG_SB;
|
|
|
|
if ((cfg & CFG_LNKSTS) &&
|
|
((new_cfg ^ ns->CFG_cache) & CFG_MODE_1000)) {
|
|
writel(new_cfg, ns->base + CFG);
|
|
ns->CFG_cache = new_cfg;
|
|
}
|
|
|
|
ns->CFG_cache &= ~CFG_SPDSTS;
|
|
ns->CFG_cache |= cfg & CFG_SPDSTS;
|
|
}
|
|
|
|
newlinkstate = (cfg & CFG_LNKSTS) ? LINK_UP : LINK_DOWN;
|
|
|
|
if (newlinkstate & LINK_UP && ns->linkstate != newlinkstate) {
|
|
printf("link now %s mbps, %s duplex and up.\n",
|
|
speeds[speed], fullduplex ? "full" : "half");
|
|
} else if (newlinkstate & LINK_DOWN
|
|
&& ns->linkstate != newlinkstate) {
|
|
printf("link now down.\n");
|
|
}
|
|
ns->linkstate = newlinkstate;
|
|
}
|
|
static void ns83820_set_multicast(struct nic *nic __unused);
|
|
static void ns83820_setup_rx(struct nic *nic)
|
|
{
|
|
unsigned i;
|
|
ns->idle = 1;
|
|
ns->next_rx = 0;
|
|
ns->next_rx_desc = ns->descs;
|
|
ns->next_empty = 0;
|
|
ns->cur_rx = 0;
|
|
|
|
|
|
for (i = 0; i < NR_RX_DESC; i++) {
|
|
rx_ring[i].link = virt_to_le32desc(&rx_ring[i + 1]);
|
|
rx_ring[i].bufptr =
|
|
virt_to_le32desc(&rxb[i * REAL_RX_BUF_SIZE]);
|
|
rx_ring[i].cmdsts = cpu_to_le32(REAL_RX_BUF_SIZE);
|
|
rx_ring[i].extsts = cpu_to_le32(0);
|
|
}
|
|
// No need to wrap the ring
|
|
// rx_ring[i].link = virt_to_le32desc(&rx_ring[0]);
|
|
writel(0, ns->base + RXDP_HI);
|
|
writel(virt_to_le32desc(&rx_ring[0]), ns->base + RXDP);
|
|
|
|
dprintf(("starting receiver\n"));
|
|
|
|
writel(0x0001, ns->base + CCSR);
|
|
writel(0, ns->base + RFCR);
|
|
writel(0x7fc00000, ns->base + RFCR);
|
|
writel(0xffc00000, ns->base + RFCR);
|
|
|
|
ns->up = 1;
|
|
|
|
phy_intr(nic);
|
|
|
|
/* Okay, let it rip */
|
|
ns->IMR_cache |= ISR_PHY;
|
|
ns->IMR_cache |= ISR_RXRCMP;
|
|
//dev->IMR_cache |= ISR_RXERR;
|
|
//dev->IMR_cache |= ISR_RXOK;
|
|
ns->IMR_cache |= ISR_RXORN;
|
|
ns->IMR_cache |= ISR_RXSOVR;
|
|
ns->IMR_cache |= ISR_RXDESC;
|
|
ns->IMR_cache |= ISR_RXIDLE;
|
|
ns->IMR_cache |= ISR_TXDESC;
|
|
ns->IMR_cache |= ISR_TXIDLE;
|
|
|
|
// No reason to enable interupts...
|
|
// writel(ns->IMR_cache, ns->base + IMR);
|
|
// writel(1, ns->base + IER);
|
|
ns83820_set_multicast(nic);
|
|
kick_rx();
|
|
}
|
|
|
|
|
|
static void ns83820_do_reset(struct nic *nic __unused, u32 which)
|
|
{
|
|
dprintf(("resetting chip...\n"));
|
|
writel(which, ns->base + CR);
|
|
do {
|
|
|
|
} while (readl(ns->base + CR) & which);
|
|
dprintf(("okay!\n"));
|
|
}
|
|
|
|
static void ns83820_reset(struct nic *nic)
|
|
{
|
|
unsigned i;
|
|
dprintf(("ns83820_reset\n"));
|
|
|
|
writel(0, ns->base + PQCR);
|
|
|
|
ns83820_setup_rx(nic);
|
|
|
|
for (i = 0; i < NR_TX_DESC; i++) {
|
|
tx_ring[i].link = 0;
|
|
tx_ring[i].bufptr = 0;
|
|
tx_ring[i].cmdsts = cpu_to_le32(0);
|
|
tx_ring[i].extsts = cpu_to_le32(0);
|
|
}
|
|
|
|
ns->tx_idx = 0;
|
|
ns->tx_done_idx = 0;
|
|
writel(0, ns->base + TXDP_HI);
|
|
return;
|
|
}
|
|
static void ns83820_getmac(struct nic *nic __unused, u8 * mac)
|
|
{
|
|
unsigned i;
|
|
for (i = 0; i < 3; i++) {
|
|
u32 data;
|
|
/* Read from the perfect match memory: this is loaded by
|
|
* the chip from the EEPROM via the EELOAD self test.
|
|
*/
|
|
writel(i * 2, ns->base + RFCR);
|
|
data = readl(ns->base + RFDR);
|
|
*mac++ = data;
|
|
*mac++ = data >> 8;
|
|
}
|
|
}
|
|
|
|
static void ns83820_set_multicast(struct nic *nic __unused)
|
|
{
|
|
u8 *rfcr = ns->base + RFCR;
|
|
u32 and_mask = 0xffffffff;
|
|
u32 or_mask = 0;
|
|
u32 val;
|
|
|
|
/* Support Multicast */
|
|
and_mask &= ~(RFCR_AAU | RFCR_AAM);
|
|
or_mask |= RFCR_AAM;
|
|
val = (readl(rfcr) & and_mask) | or_mask;
|
|
/* Ramit : RFCR Write Fix doc says RFEN must be 0 modify other bits */
|
|
writel(val & ~RFCR_RFEN, rfcr);
|
|
writel(val, rfcr);
|
|
|
|
}
|
|
static void ns83820_run_bist(struct nic *nic __unused, const char *name,
|
|
u32 enable, u32 done, u32 fail)
|
|
{
|
|
int timed_out = 0;
|
|
long start;
|
|
u32 status;
|
|
int loops = 0;
|
|
|
|
dprintf(("start %s\n", name))
|
|
|
|
start = currticks();
|
|
|
|
writel(enable, ns->base + PTSCR);
|
|
for (;;) {
|
|
loops++;
|
|
status = readl(ns->base + PTSCR);
|
|
if (!(status & enable))
|
|
break;
|
|
if (status & done)
|
|
break;
|
|
if (status & fail)
|
|
break;
|
|
if ((currticks() - start) >= HZ) {
|
|
timed_out = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (status & fail)
|
|
printf("%s failed! (0x%hX & 0x%hX)\n", name, status, fail);
|
|
else if (timed_out)
|
|
printf("run_bist %s timed out! (%hX)\n", name, status);
|
|
dprintf(("done %s in %d loops\n", name, loops));
|
|
}
|
|
|
|
/*************************************
|
|
Check Link
|
|
*************************************/
|
|
static void ns83820_check_intr(struct nic *nic) {
|
|
int i;
|
|
u32 isr = readl(ns->base + ISR);
|
|
if(ISR_PHY & isr)
|
|
phy_intr(nic);
|
|
if(( ISR_RXIDLE | ISR_RXDESC | ISR_RXERR) & isr)
|
|
kick_rx();
|
|
for (i = 0; i < NR_RX_DESC; i++) {
|
|
if (rx_ring[i].cmdsts == CMDSTS_OWN) {
|
|
// rx_ring[i].link = virt_to_le32desc(&rx_ring[i + 1]);
|
|
rx_ring[i].cmdsts = cpu_to_le32(REAL_RX_BUF_SIZE);
|
|
}
|
|
}
|
|
}
|
|
/**************************************************************************
|
|
POLL - Wait for a frame
|
|
***************************************************************************/
|
|
static int ns83820_poll(struct nic *nic, int retrieve)
|
|
{
|
|
/* return true if there's an ethernet packet ready to read */
|
|
/* nic->packet should contain data on return */
|
|
/* nic->packetlen should contain length of data */
|
|
u32 cmdsts;
|
|
int entry = ns->cur_rx;
|
|
|
|
ns83820_check_intr(nic);
|
|
|
|
cmdsts = le32_to_cpu(rx_ring[entry].cmdsts);
|
|
|
|
if ( ! ( (CMDSTS_OWN & (cmdsts)) && (cmdsts != (CMDSTS_OWN)) ) )
|
|
return 0;
|
|
|
|
if ( ! retrieve ) return 1;
|
|
|
|
if (! (CMDSTS_OK & cmdsts) )
|
|
return 0;
|
|
|
|
nic->packetlen = cmdsts & 0xffff;
|
|
memcpy(nic->packet,
|
|
rxb + (entry * REAL_RX_BUF_SIZE),
|
|
nic->packetlen);
|
|
// rx_ring[entry].link = 0;
|
|
rx_ring[entry].cmdsts = cpu_to_le32(CMDSTS_OWN);
|
|
|
|
ns->cur_rx = ++ns->cur_rx % NR_RX_DESC;
|
|
|
|
if (ns->cur_rx == 0) /* We have wrapped the ring */
|
|
kick_rx();
|
|
|
|
return 1;
|
|
}
|
|
|
|
static inline void kick_tx(struct nic *nic __unused)
|
|
{
|
|
dprintf(("kick_tx\n"));
|
|
writel(CR_TXE, ns->base + CR);
|
|
}
|
|
|
|
/**************************************************************************
|
|
TRANSMIT - Transmit a frame
|
|
***************************************************************************/
|
|
static void ns83820_transmit(struct nic *nic, const char *d, /* Destination */
|
|
unsigned int t, /* Type */
|
|
unsigned int s, /* size */
|
|
const char *p)
|
|
{ /* Packet */
|
|
/* send the packet to destination */
|
|
|
|
u16 nstype;
|
|
u32 cmdsts, extsts;
|
|
int cur_tx = 0;
|
|
u32 isr = readl(ns->base + ISR);
|
|
if (ISR_TXIDLE & isr)
|
|
kick_tx(nic);
|
|
/* point to the current txb incase multiple tx_rings are used */
|
|
memcpy(txb, d, ETH_ALEN);
|
|
memcpy(txb + ETH_ALEN, nic->node_addr, ETH_ALEN);
|
|
nstype = htons((u16) t);
|
|
memcpy(txb + 2 * ETH_ALEN, (u8 *) & nstype, 2);
|
|
memcpy(txb + ETH_HLEN, p, s);
|
|
s += ETH_HLEN;
|
|
s &= 0x0FFF;
|
|
while (s < ETH_ZLEN)
|
|
txb[s++] = '\0';
|
|
|
|
/* Setup the transmit descriptor */
|
|
extsts = 0;
|
|
extsts |= EXTSTS_UDPPKT;
|
|
|
|
tx_ring[cur_tx].bufptr = virt_to_le32desc(&txb);
|
|
tx_ring[cur_tx].extsts = cpu_to_le32(extsts);
|
|
|
|
cmdsts = cpu_to_le32(0);
|
|
cmdsts |= cpu_to_le32(CMDSTS_OWN | s);
|
|
tx_ring[cur_tx].cmdsts = cpu_to_le32(cmdsts);
|
|
|
|
writel(virt_to_le32desc(&tx_ring[0]), ns->base + TXDP);
|
|
kick_tx(nic);
|
|
}
|
|
|
|
/**************************************************************************
|
|
DISABLE - Turn off ethernet interface
|
|
***************************************************************************/
|
|
static void ns83820_disable ( struct nic *nic, struct pci_device *pci __unused ) {
|
|
nic_disable ( nic );
|
|
/* put the card in its initial state */
|
|
/* This function serves 3 purposes.
|
|
* This disables DMA and interrupts so we don't receive
|
|
* unexpected packets or interrupts from the card after
|
|
* etherboot has finished.
|
|
* This frees resources so etherboot may use
|
|
* this driver on another interface
|
|
* This allows etherboot to reinitialize the interface
|
|
* if something is something goes wrong.
|
|
*/
|
|
/* disable interrupts */
|
|
writel(0, ns->base + IMR);
|
|
writel(0, ns->base + IER);
|
|
readl(ns->base + IER);
|
|
|
|
ns->up = 0;
|
|
|
|
ns83820_do_reset(nic, CR_RST);
|
|
|
|
ns->IMR_cache &=
|
|
~(ISR_RXOK | ISR_RXDESC | ISR_RXERR | ISR_RXEARLY |
|
|
ISR_RXIDLE);
|
|
writel(ns->IMR_cache, ns->base + IMR);
|
|
|
|
/* touch the pci bus... */
|
|
readl(ns->base + IMR);
|
|
|
|
/* assumes the transmitter is already disabled and reset */
|
|
writel(0, ns->base + RXDP_HI);
|
|
writel(0, ns->base + RXDP);
|
|
}
|
|
|
|
/**************************************************************************
|
|
IRQ - Enable, Disable, or Force interrupts
|
|
***************************************************************************/
|
|
static void ns83820_irq(struct nic *nic __unused, irq_action_t action __unused)
|
|
{
|
|
switch ( action ) {
|
|
case DISABLE :
|
|
break;
|
|
case ENABLE :
|
|
break;
|
|
case FORCE :
|
|
break;
|
|
}
|
|
}
|
|
|
|
static struct nic_operations ns83820_operations = {
|
|
.connect = dummy_connect,
|
|
.poll = ns83820_poll,
|
|
.transmit = ns83820_transmit,
|
|
.irq = ns83820_irq,
|
|
|
|
};
|
|
|
|
static struct pci_id ns83820_nics[] = {
|
|
PCI_ROM(0x100b, 0x0022, "ns83820", "National Semiconductor 83820"),
|
|
};
|
|
|
|
PCI_DRIVER ( ns83820_driver, ns83820_nics, PCI_NO_CLASS );
|
|
|
|
/**************************************************************************
|
|
PROBE - Look for an adapter, this routine's visible to the outside
|
|
***************************************************************************/
|
|
|
|
#define board_found 1
|
|
#define valid_link 0
|
|
static int ns83820_probe ( struct nic *nic, struct pci_device *pci ) {
|
|
|
|
int sz;
|
|
long addr;
|
|
int using_dac = 0;
|
|
|
|
if (pci->ioaddr == 0)
|
|
return 0;
|
|
|
|
printf("ns83820.c: Found %s, vendor=0x%hX, device=0x%hX\n",
|
|
pci->name, pci->vendor_id, pci->device_id);
|
|
|
|
/* point to private storage */
|
|
ns = &nsx;
|
|
|
|
adjust_pci_device(pci);
|
|
|
|
addr = pci_bar_start(pci, PCI_BASE_ADDRESS_1);
|
|
sz = pci_bar_size(pci, PCI_BASE_ADDRESS_1);
|
|
|
|
ns->base = ioremap(addr, (1UL << 12));
|
|
// ns->base = ioremap(addr, sz);
|
|
|
|
if (!ns->base)
|
|
return 0;
|
|
|
|
nic->irqno = 0;
|
|
pci_fill_nic ( nic, pci );
|
|
nic->ioaddr = pci->ioaddr & ~3;
|
|
|
|
/* disable interrupts */
|
|
writel(0, ns->base + IMR);
|
|
writel(0, ns->base + IER);
|
|
readl(ns->base + IER);
|
|
|
|
ns->IMR_cache = 0;
|
|
|
|
ns83820_do_reset(nic, CR_RST);
|
|
|
|
/* Must reset the ram bist before running it */
|
|
writel(PTSCR_RBIST_RST, ns->base + PTSCR);
|
|
ns83820_run_bist(nic, "sram bist", PTSCR_RBIST_EN,
|
|
PTSCR_RBIST_DONE, PTSCR_RBIST_FAIL);
|
|
ns83820_run_bist(nic, "eeprom bist", PTSCR_EEBIST_EN, 0,
|
|
PTSCR_EEBIST_FAIL);
|
|
ns83820_run_bist(nic, "eeprom load", PTSCR_EELOAD_EN, 0, 0);
|
|
|
|
/* I love config registers */
|
|
ns->CFG_cache = readl(ns->base + CFG);
|
|
|
|
if ((ns->CFG_cache & CFG_PCI64_DET)) {
|
|
printf("%s: detected 64 bit PCI data bus.\n", pci->name);
|
|
/*dev->CFG_cache |= CFG_DATA64_EN; */
|
|
if (!(ns->CFG_cache & CFG_DATA64_EN))
|
|
printf
|
|
("%s: EEPROM did not enable 64 bit bus. Disabled.\n",
|
|
pci->name);
|
|
} else
|
|
ns->CFG_cache &= ~(CFG_DATA64_EN);
|
|
|
|
ns->CFG_cache &= (CFG_TBI_EN | CFG_MRM_DIS | CFG_MWI_DIS |
|
|
CFG_T64ADDR | CFG_DATA64_EN | CFG_EXT_125 |
|
|
CFG_M64ADDR);
|
|
ns->CFG_cache |=
|
|
CFG_PINT_DUPSTS | CFG_PINT_LNKSTS | CFG_PINT_SPDSTS |
|
|
CFG_EXTSTS_EN | CFG_EXD | CFG_PESEL;
|
|
ns->CFG_cache |= CFG_REQALG;
|
|
ns->CFG_cache |= CFG_POW;
|
|
ns->CFG_cache |= CFG_TMRTEST;
|
|
|
|
/* When compiled with 64 bit addressing, we must always enable
|
|
* the 64 bit descriptor format.
|
|
*/
|
|
#ifdef USE_64BIT_ADDR
|
|
ns->CFG_cache |= CFG_M64ADDR;
|
|
#endif
|
|
|
|
//FIXME: Enable section on dac or remove this
|
|
if (using_dac)
|
|
ns->CFG_cache |= CFG_T64ADDR;
|
|
|
|
/* Big endian mode does not seem to do what the docs suggest */
|
|
ns->CFG_cache &= ~CFG_BEM;
|
|
|
|
/* setup optical transceiver if we have one */
|
|
if (ns->CFG_cache & CFG_TBI_EN) {
|
|
dprintf(("%s: enabling optical transceiver\n", pci->name));
|
|
writel(readl(ns->base + GPIOR) | 0x3e8, ns->base + GPIOR);
|
|
|
|
/* setup auto negotiation feature advertisement */
|
|
writel(readl(ns->base + TANAR)
|
|
| TANAR_HALF_DUP | TANAR_FULL_DUP,
|
|
ns->base + TANAR);
|
|
|
|
/* start auto negotiation */
|
|
writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN,
|
|
ns->base + TBICR);
|
|
writel(TBICR_MR_AN_ENABLE, ns->base + TBICR);
|
|
ns->linkstate = LINK_AUTONEGOTIATE;
|
|
|
|
ns->CFG_cache |= CFG_MODE_1000;
|
|
}
|
|
writel(ns->CFG_cache, ns->base + CFG);
|
|
dprintf(("CFG: %hX\n", ns->CFG_cache));
|
|
|
|
/* FIXME: reset_phy is defaulted to 0, should we reset anyway? */
|
|
if (reset_phy) {
|
|
dprintf(("%s: resetting phy\n", pci->name));
|
|
writel(ns->CFG_cache | CFG_PHY_RST, ns->base + CFG);
|
|
writel(ns->CFG_cache, ns->base + CFG);
|
|
}
|
|
#if 0 /* Huh? This sets the PCI latency register. Should be done via
|
|
* the PCI layer. FIXME.
|
|
*/
|
|
if (readl(dev->base + SRR))
|
|
writel(readl(dev->base + 0x20c) | 0xfe00,
|
|
dev->base + 0x20c);
|
|
#endif
|
|
|
|
/* Note! The DMA burst size interacts with packet
|
|
* transmission, such that the largest packet that
|
|
* can be transmitted is 8192 - FLTH - burst size.
|
|
* If only the transmit fifo was larger...
|
|
*/
|
|
/* Ramit : 1024 DMA is not a good idea, it ends up banging
|
|
* some DELL and COMPAQ SMP systems */
|
|
writel(TXCFG_CSI | TXCFG_HBI | TXCFG_ATP | TXCFG_MXDMA512
|
|
| ((1600 / 32) * 0x100), ns->base + TXCFG);
|
|
|
|
/* Set Rx to full duplex, don't accept runt, errored, long or length
|
|
* range errored packets. Use 512 byte DMA.
|
|
*/
|
|
/* Ramit : 1024 DMA is not a good idea, it ends up banging
|
|
* some DELL and COMPAQ SMP systems
|
|
* Turn on ALP, only we are accpeting Jumbo Packets */
|
|
writel(RXCFG_AEP | RXCFG_ARP | RXCFG_AIRL | RXCFG_RX_FD
|
|
| RXCFG_STRIPCRC
|
|
//| RXCFG_ALP
|
|
| (RXCFG_MXDMA512) | 0, ns->base + RXCFG);
|
|
|
|
/* Disable priority queueing */
|
|
writel(0, ns->base + PQCR);
|
|
|
|
/* Enable IP checksum validation and detetion of VLAN headers.
|
|
* Note: do not set the reject options as at least the 0x102
|
|
* revision of the chip does not properly accept IP fragments
|
|
* at least for UDP.
|
|
*/
|
|
/* Ramit : Be sure to turn on RXCFG_ARP if VLAN's are enabled, since
|
|
* the MAC it calculates the packetsize AFTER stripping the VLAN
|
|
* header, and if a VLAN Tagged packet of 64 bytes is received (like
|
|
* a ping with a VLAN header) then the card, strips the 4 byte VLAN
|
|
* tag and then checks the packet size, so if RXCFG_ARP is not enabled,
|
|
* it discrards it!. These guys......
|
|
*/
|
|
writel(VRCR_IPEN | VRCR_VTDEN, ns->base + VRCR);
|
|
|
|
/* Enable per-packet TCP/UDP/IP checksumming */
|
|
writel(VTCR_PPCHK, ns->base + VTCR);
|
|
|
|
/* Ramit : Enable async and sync pause frames */
|
|
// writel(0, ns->base + PCR);
|
|
writel((PCR_PS_MCAST | PCR_PS_DA | PCR_PSEN | PCR_FFLO_4K |
|
|
PCR_FFHI_8K | PCR_STLO_4 | PCR_STHI_8 | PCR_PAUSE_CNT),
|
|
ns->base + PCR);
|
|
|
|
/* Disable Wake On Lan */
|
|
writel(0, ns->base + WCSR);
|
|
|
|
ns83820_getmac(nic, nic->node_addr);
|
|
printf("%! at ioaddr 0x%hX, ", nic->node_addr, ns->base);
|
|
|
|
if (using_dac) {
|
|
dprintf(("%s: using 64 bit addressing.\n", pci->name));
|
|
}
|
|
|
|
dprintf(("%s: DP83820 %d.%d: %! io=0x%hX\n",
|
|
pci->name,
|
|
(unsigned) readl(ns->base + SRR) >> 8,
|
|
(unsigned) readl(ns->base + SRR) & 0xff,
|
|
nic->node_addr, pci->ioaddr));
|
|
|
|
#ifdef PHY_CODE_IS_FINISHED
|
|
ns83820_probe_phy(dev);
|
|
#endif
|
|
|
|
ns83820_reset(nic);
|
|
/* point to NIC specific routines */
|
|
nic->nic_op = &ns83820_operations;
|
|
return 1;
|
|
}
|
|
|
|
DRIVER ( "NS83820/PCI", nic_driver, pci_driver, ns83820_driver,
|
|
ns83820_probe, ns83820_disable );
|