![Michael Brown](/assets/img/avatar_default.png)
Add FILE_LICENCE declarations to almost all files that make up the various standard builds of gPXE.
233 lines
5.6 KiB
C
233 lines
5.6 KiB
C
FILE_LICENCE ( GPL_ANY );
|
|
|
|
#define NATSEMI_HW_TIMEOUT 400
|
|
|
|
#define TX_RING_SIZE 4
|
|
#define NUM_RX_DESC 4
|
|
#define RX_BUF_SIZE 1536
|
|
#define OWN 0x80000000
|
|
#define DSIZE 0x00000FFF
|
|
#define CRC_SIZE 4
|
|
|
|
struct natsemi_tx {
|
|
uint32_t link;
|
|
uint32_t cmdsts;
|
|
uint32_t bufptr;
|
|
};
|
|
|
|
struct natsemi_rx {
|
|
uint32_t link;
|
|
uint32_t cmdsts;
|
|
uint32_t bufptr;
|
|
};
|
|
|
|
struct natsemi_private {
|
|
unsigned short ioaddr;
|
|
unsigned short tx_cur;
|
|
unsigned short tx_dirty;
|
|
unsigned short rx_cur;
|
|
struct natsemi_tx tx[TX_RING_SIZE];
|
|
struct natsemi_rx rx[NUM_RX_DESC];
|
|
|
|
/* need to add iobuf as we cannot free iobuf->data in close without this
|
|
* alternatively substracting sizeof(head) and sizeof(list_head) can also
|
|
* give the same.
|
|
*/
|
|
struct io_buffer *iobuf[NUM_RX_DESC];
|
|
|
|
/* netdev_tx_complete needs pointer to the iobuf of the data so as to free
|
|
* it from the memory.
|
|
*/
|
|
struct io_buffer *tx_iobuf[TX_RING_SIZE];
|
|
struct spi_bit_basher spibit;
|
|
struct spi_device eeprom;
|
|
struct nvo_block nvo;
|
|
};
|
|
|
|
/*
|
|
* Support for fibre connections on Am79C874:
|
|
* This phy needs a special setup when connected to a fibre cable.
|
|
* http://www.amd.com/files/connectivitysolutions/networking/archivednetworking/22235.pdf
|
|
*/
|
|
#define PHYID_AM79C874 0x0022561b
|
|
|
|
enum {
|
|
MII_MCTRL = 0x15, /* mode control register */
|
|
MII_FX_SEL = 0x0001, /* 100BASE-FX (fiber) */
|
|
MII_EN_SCRM = 0x0004, /* enable scrambler (tp) */
|
|
};
|
|
|
|
|
|
|
|
/* values we might find in the silicon revision register */
|
|
#define SRR_DP83815_C 0x0302
|
|
#define SRR_DP83815_D 0x0403
|
|
#define SRR_DP83816_A4 0x0504
|
|
#define SRR_DP83816_A5 0x0505
|
|
|
|
/* NATSEMI: Offsets to the device registers.
|
|
* Unlike software-only systems, device drivers interact with complex hardware.
|
|
* It's not useful to define symbolic names for every register bit in the
|
|
* device.
|
|
*/
|
|
enum register_offsets {
|
|
ChipCmd = 0x00,
|
|
ChipConfig = 0x04,
|
|
EECtrl = 0x08,
|
|
PCIBusCfg = 0x0C,
|
|
IntrStatus = 0x10,
|
|
IntrMask = 0x14,
|
|
IntrEnable = 0x18,
|
|
TxRingPtr = 0x20,
|
|
TxConfig = 0x24,
|
|
RxRingPtr = 0x30,
|
|
RxConfig = 0x34,
|
|
ClkRun = 0x3C,
|
|
WOLCmd = 0x40,
|
|
PauseCmd = 0x44,
|
|
RxFilterAddr = 0x48,
|
|
RxFilterData = 0x4C,
|
|
BootRomAddr = 0x50,
|
|
BootRomData = 0x54,
|
|
SiliconRev = 0x58,
|
|
StatsCtrl = 0x5C,
|
|
StatsData = 0x60,
|
|
RxPktErrs = 0x60,
|
|
RxMissed = 0x68,
|
|
RxCRCErrs = 0x64,
|
|
PCIPM = 0x44,
|
|
PhyStatus = 0xC0,
|
|
MIntrCtrl = 0xC4,
|
|
MIntrStatus = 0xC8,
|
|
|
|
/* These are from the spec, around page 78... on a separate table.
|
|
*/
|
|
PGSEL = 0xCC,
|
|
PMDCSR = 0xE4,
|
|
TSTDAT = 0xFC,
|
|
DSPCFG = 0xF4,
|
|
SDCFG = 0x8C,
|
|
BasicControl = 0x80,
|
|
BasicStatus = 0x84
|
|
|
|
};
|
|
|
|
/* the values for the 'magic' registers above (PGSEL=1) */
|
|
#define PMDCSR_VAL 0x189c /* enable preferred adaptation circuitry */
|
|
#define TSTDAT_VAL 0x0
|
|
#define DSPCFG_VAL 0x5040
|
|
#define SDCFG_VAL 0x008c /* set voltage thresholds for Signal Detect */
|
|
#define DSPCFG_LOCK 0x20 /* coefficient lock bit in DSPCFG */
|
|
#define DSPCFG_COEF 0x1000 /* see coefficient (in TSTDAT) bit in DSPCFG */
|
|
#define TSTDAT_FIXED 0xe8 /* magic number for bad coefficients */
|
|
|
|
/* Bit in ChipCmd.
|
|
*/
|
|
enum ChipCmdBits {
|
|
ChipReset = 0x100,
|
|
RxReset = 0x20,
|
|
TxReset = 0x10,
|
|
RxOff = 0x08,
|
|
RxOn = 0x04,
|
|
TxOff = 0x02,
|
|
TxOn = 0x01
|
|
};
|
|
|
|
enum ChipConfig_bits {
|
|
CfgPhyDis = 0x200,
|
|
CfgPhyRst = 0x400,
|
|
CfgExtPhy = 0x1000,
|
|
CfgAnegEnable = 0x2000,
|
|
CfgAneg100 = 0x4000,
|
|
CfgAnegFull = 0x8000,
|
|
CfgAnegDone = 0x8000000,
|
|
CfgFullDuplex = 0x20000000,
|
|
CfgSpeed100 = 0x40000000,
|
|
CfgLink = 0x80000000,
|
|
};
|
|
|
|
|
|
/* Bits in the RxMode register.
|
|
*/
|
|
enum rx_mode_bits {
|
|
AcceptErr = 0x20,
|
|
AcceptRunt = 0x10,
|
|
AcceptBroadcast = 0xC0000000,
|
|
AcceptMulticast = 0x00200000,
|
|
AcceptAllMulticast = 0x20000000,
|
|
AcceptAllPhys = 0x10000000,
|
|
AcceptMyPhys = 0x08000000,
|
|
RxFilterEnable = 0x80000000
|
|
};
|
|
|
|
/* Bits in network_desc.status
|
|
*/
|
|
enum desc_status_bits {
|
|
DescOwn = 0x80000000,
|
|
DescMore = 0x40000000,
|
|
DescIntr = 0x20000000,
|
|
DescNoCRC = 0x10000000,
|
|
DescPktOK = 0x08000000,
|
|
RxTooLong = 0x00400000
|
|
};
|
|
|
|
/*Bits in Interrupt Mask register
|
|
*/
|
|
enum Intr_mask_register_bits {
|
|
RxOk = 0x001,
|
|
RxErr = 0x004,
|
|
TxOk = 0x040,
|
|
TxErr = 0x100
|
|
};
|
|
|
|
enum MIntrCtrl_bits {
|
|
MICRIntEn = 0x2,
|
|
};
|
|
|
|
/* CFG bits [13:16] [18:23] */
|
|
#define CFG_RESET_SAVE 0xfde000
|
|
/* WCSR bits [0:4] [9:10] */
|
|
#define WCSR_RESET_SAVE 0x61f
|
|
/* RFCR bits [20] [22] [27:31] */
|
|
#define RFCR_RESET_SAVE 0xf8500000;
|
|
|
|
/* Delay between EEPROM clock transitions.
|
|
No extra delay is needed with 33Mhz PCI, but future 66Mhz access may need
|
|
a delay. */
|
|
#define eeprom_delay(ee_addr) inl(ee_addr)
|
|
|
|
enum EEPROM_Ctrl_Bits {
|
|
EE_ShiftClk = 0x04,
|
|
EE_DataIn = 0x01,
|
|
EE_ChipSelect = 0x08,
|
|
EE_DataOut = 0x02
|
|
};
|
|
|
|
#define EE_Write0 (EE_ChipSelect)
|
|
#define EE_Write1 (EE_ChipSelect | EE_DataIn)
|
|
|
|
/* The EEPROM commands include the alway-set leading bit. */
|
|
enum EEPROM_Cmds {
|
|
EE_WriteCmd=(5 << 6), EE_ReadCmd=(6 << 6), EE_EraseCmd=(7 << 6),
|
|
};
|
|
|
|
/* EEPROM access , values are devices specific
|
|
*/
|
|
#define EE_CS 0x08 /* EEPROM chip select */
|
|
#define EE_SK 0x04 /* EEPROM shift clock */
|
|
#define EE_DI 0x01 /* Data in */
|
|
#define EE_DO 0x02 /* Data out */
|
|
|
|
/* Offsets within EEPROM (these are word offsets)
|
|
*/
|
|
#define EE_MAC 7
|
|
#define EE_REG EECtrl
|
|
|
|
static const uint8_t natsemi_ee_bits[] = {
|
|
[SPI_BIT_SCLK] = EE_SK,
|
|
[SPI_BIT_MOSI] = EE_DI,
|
|
[SPI_BIT_MISO] = EE_DO,
|
|
[SPI_BIT_SS(0)] = EE_CS,
|
|
};
|
|
|