david/ipxe
david
/
ipxe
Archived
1
0
Fork 0
Code
This repository has been archived on 2020-12-06. You can view files and clone it, but cannot push or open issues or pull requests.
ipxe/src/Makefile.main

451 lines
15 KiB
Makefile
Raw Blame History

#
# Makefile for Etherboot
#
# Most of the time you should edit Config
#
# Common options:
# VERSION_*=v - Set the major and minor version numbers
#
# NS8390 options:
# -DINCLUDE_NE - Include NE1000/NE2000 support
# -DNE_SCAN=list - Probe for NE base address using list of
# comma separated hex addresses
# -DINCLUDE_3C503 - Include 3c503 support
# -DT503_SHMEM - Use 3c503 shared memory mode (off by default)
# -DINCLUDE_WD - Include Western Digital/SMC support
# -DWD_DEFAULT_MEM- Default memory location for WD/SMC cards
# -DWD_790_PIO - Read/write to WD/SMC 790 cards in PIO mode (default
# is to use shared memory) Try this if you get "Bogus
# packet, ignoring" messages, common on ISA/PCI hybrid
# systems.
# -DCOMPEX_RL2000_FIX
#
# If you have a Compex RL2000 PCI 32-bit (11F6:1401),
# and the bootrom hangs in "Probing...[NE*000/PCI]",
# try enabling this fix... it worked for me :).
# In the first packet write somehow it somehow doesn't
# get back the expected data so it is stuck in a loop.
# I didn't bother to investigate what or why because it works
# when I interrupt the loop if it takes more then COMPEX_RL2000_TRIES.
# The code will notify if it does a abort.
# SomniOne - somnione@gmx.net
#
# 3C509 option:
# -DINCLUDE_3C509 - Include 3c509 support
#
# 3C90X options:
# -DINCLUDE_3C90X - Include 3c90x support
#
# Warning Warning Warning
# If you use any of the XCVR options below, please do not complain about
# the behaviour with Linux drivers to the kernel developers. You are
# on your own if you do this. Please read 3c90x.txt to understand
# what they do. If you don't understand them, ask for help on the
# Etherboot mailing list. And please document what you did to the NIC
# on the NIC so that people after you won't get nasty surprises.
#
# -DCFG_3C90X_PRESERVE_XCVR - Reset the transceiver type to the value it
# had initially just before the loaded code is started.
# -DCFG_3C90X_XCVR - Hardcode the tranceiver type Etherboot uses.
# -DCFG_3C90X_BOOTROM_FIX - If you have a 3c905B with buggy ROM
# interface, setting this option might "fix" it. Use
# with caution and read the docs in 3c90x.txt!
#
# See the documentation file 3c90x.txt for more details.
#
# CS89X0 (optional) options:
# -DINCLUDE_CS89X0- Include CS89x0 support
# -DCS_SCAN=list - Probe for CS89x0 base address using list of
# comma separated hex addresses; increasing the
# address by one (0x300 -> 0x301) will force a
# more aggressive probing algorithm. This might
# be neccessary after a soft-reset of the NIC.
#
# LANCE options:
# -DINCLUDE_NE2100- Include NE2100 support
# -DINCLUDE_NI6510- Include NI6510 support
#
# SK_G16 options:
# -DINCLUDE_SK_G16- Include SK_G16 support
#
# I82586 options:
# -DINCLUDE_3C507 - Include 3c507 support
# -DINCLUDE_NI5210- Include NI5210 support
# -DINCLUDE_EXOS205-Include EXOS205 support
#
# SMC9000 options:
# -DINCLUDE_SMC9000 - Include SMC9000 driver
# -DSMC9000_SCAN=list - List of I/O addresses to probe
#
# TIARA (Fujitsu Etherstar) options:
# -DINCLUDE_TIARA - Include Tiara support
#
# NI5010 options:
# -DINCLUDE_NI5010 - Include NI5010 support
#
# TULIP options:
# -DINCLUDE_TULIP - Include Tulip support
#
# RTL8139 options:
# -DINCLUDE_RTL8139 - Include RTL8139 support
#
# SIS900 options:
# -DINCLUDE_SIS900 - Include SIS900 support
#
# NATSEMI options:
# -DINCLUDE_NATSEMI - Include NATSEMI support
#
SRCS:=
BOBJS:=
MAKEROM= $(PERL) ./util/makerom.pl
VERSION_MAJOR= 5
VERSION_MINOR= 3
VERSION_PATCH= 14
EXTRAVERSION=
VERSION= $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_PATCH)$(EXTRAVERSION)
MM_VERSION= $(VERSION_MAJOR).$(VERSION_MINOR)
CFLAGS+= -DVERSION_MAJOR=$(VERSION_MAJOR) \
-DVERSION_MINOR=$(VERSION_MINOR) \
-DVERSION=\"$(VERSION)\" $(OLDGAS) \
-I include -I arch/$(ARCH)/include \
-DARCH=$(ARCH)
FILO=filo
FILO_PROGRAM_NAME = FILO
FILO_PROGRAM_VERSION = 0.4.1
FILO_BUILD_INFO = ($(shell whoami)@$(shell hostname)) $(shell LANG=C date)
GCCINCDIR = $(shell $(CC) -print-search-dirs | head -n 1 | cut -d' ' -f2)include
CPPFLAGS = -nostdinc -imacros filo/config.h
#-Ifilo/include -I$(GCCINCDIR) -MD
ASFLAGS_X = -D__ASSEMBLY__
IDENT= '$(@F) $(VERSION) (GPL) etherboot.org'
# Find out if we're using binutils 2.9.1 which uses a different syntax in some
# places (most prominently in the opcode prefix area).
OLDGAS:= $(shell $(AS) --version | grep -q '2\.9\.1' && echo -DGAS291)
BUILD_LIBS= $(BLIB)
BUILD_IMGS= $(IMGS)
3C503FLAGS= -DINCLUDE_3C503 # -DT503_SHMEM
# Note that the suffix to MAKEROM_ is the (mixed case) basename of the ROM file
MAKEROM_3c503= -3
3C507FLAGS= -DINCLUDE_3C507
3C509FLAGS= -DINCLUDE_3C509
3C529FLAGS= -DINCLUDE_3C529
3C595FLAGS= -DINCLUDE_3C595
3C90XFLAGS= -DINCLUDE_3C90X
CS89X0FLAGS= -DINCLUDE_CS89X0
EEPROFLAGS= -DINCLUDE_EEPRO
EEPRO100FLAGS= -DINCLUDE_EEPRO100
E1000FLAGS= -DINCLUDE_E1000
EPIC100FLAGS= -DINCLUDE_EPIC100
EXOS205FLAGS= -DINCLUDE_EXOS205
LANCEFLAGS= -DINCLUDE_LANCE # Lance/PCI!
NE2100FLAGS= -DINCLUDE_NE2100
NEFLAGS= -DINCLUDE_NE -DNE_SCAN=0x300,0x280,0x320,0x340,0x380
NS8390FLAGS= -DINCLUDE_NS8390 # NE2000/PCI!
NI5010FLAGS= -DINCLUDE_NI5010
NI5210FLAGS= -DINCLUDE_NI5210
NI6510FLAGS= -DINCLUDE_NI6510
RTL8139FLAGS= -DINCLUDE_RTL8139
SK_G16FLAGS= -DINCLUDE_SK_G16
SIS900FLAGS= -DINCLUDE_SIS900
NATSEMIFLAGS= -DINCLUDE_NATSEMI
SMC9000FLAGS= -DINCLUDE_SMC9000
SUNDANCEFLAGS= -DINCLUDE_SUNDANCE
TLANFLAGS= -DINCLUDE_TLAN
TIARAFLAGS= -DINCLUDE_TIARA
DEPCAFLAGS= -DINCLUDE_DEPCA # -DDEPCA_MODEL=DEPCA -DDEPCA_RAM_BASE=0xd0000
TULIPFLAGS= -DINCLUDE_TULIP
OTULIPFLAGS= -DINCLUDE_OTULIP
VIA_RHINEFLAGS= -DINCLUDE_VIA_RHINE
WDFLAGS= -DINCLUDE_WD -DWD_DEFAULT_MEM=0xCC000
W89C840FLAGS= -DINCLUDE_W89C840
SRCS+= core/serial.c
SRCS+= core/btext.c core/pc_kbd.c
SRCS+= core/main.c core/pci.c core/osloader.c core/nfs.c
SRCS+= core/misc.c core/config.c core/isa_probe.c core/pci_probe.c
SRCS+= core/relocate.c core/heap.c
SRCS+= drivers/disk/floppy.c core/nic.c core/disk.c core/timer.c
SRCS+= core/proto_eth_slow.c
SRCS+= core/proto_slam.c core/proto_tftm.c core/proto_http.c
SRCS+= core/isapnp.c
SRCS+= core/pcmcia.c core/i82365.c
SRCS+= core/pxe_export.c core/dns_resolver.c
FILO_SRCS+= $(FILO)/drivers/ide_x.c
FILO_SRCS+= $(FILO)/fs/blockdev.c $(FILO)/fs/eltorito.c $(FILO)/fs/fsys_ext2fs.c $(FILO)/fs/fsys_fat.c $(FILO)/fs/fsys_iso9660.c
FILO_SRCS+= $(FILO)/fs/fsys_reiserfs.c $(FILO)/fs/vfs.c $(FILO)/fs/fsys_jfs.c $(FILO)/fs/fsys_minix.c $(FILO)/fs/fsys_xfs.c
FILO_SRCS+= $(FILO)/main/elfload.c $(FILO)/main/elfnote.c $(FILO)/main/filo_x.c $(FILO)/main/lib.c $(FILO)/main/linuxbios_x.c
FILO_SRCS+= $(FILO)/main/pci_x.c $(FILO)/main/malloc_x.c $(FILO)/main/printf_x.c $(FILO)/main/console_x.c
FILO_SRCS+= $(FILO)/$(ARCH)/context.c $(FILO)/$(ARCH)/linux_load.c $(FILO)/$(ARCH)/segment.c $(FILO)/$(ARCH)/sys_info.c
FILO_SRCS+= $(FILO)/$(ARCH)/switch.S $(FILO)/usb/debug_x.c $(FILO)/usb/scsi_cmds.c $(FILO)/usb/uhci.c $(FILO)/usb/usb.c
FILO_SRCS+= $(FILO)/usb/ohci.c $(FILO)/usb/usb_scsi_low.c $(FILO)/usb/usb_x.c
BOBJS+= $(BIN)/main.o $(BIN)/osloader.o $(BIN)/nfs.o $(BIN)/misc.o
BOBJS+= $(BIN)/proto_slam.o $(BIN)/proto_tftm.o $(BIN)/proto_http.o
BOBJS+= $(BIN)/floppy.o
BOBJS+= $(BIN)/serial.o $(BIN)/timer.o $(BIN)/relocate.o $(BIN)/heap.o
BOBJS+= $(BIN)/btext.o $(BIN)/pc_kbd.o
BOBJS+= $(BIN)/nic.o $(BIN)/disk.o
BOBJS+= $(BIN)/isapnp.o
BOBJS+= $(BIN)/pci.o $(BIN)/isa_probe.o $(BIN)/pci_probe.o
BOBJS+= $(BIN)/vsprintf.o $(BIN)/string.o
BOBJS+= $(BIN)/pcmcia.o $(BIN)/i82365.o
BOBJS+= $(BIN)/pxe_export.o $(BIN)/dns_resolver.o
FILO_OBJS+= $(BIN)/ide_x.o $(BIN)/pci_x.o
FILO_OBJS+= $(BIN)/blockdev.o $(BIN)/eltorito.o $(BIN)/fsys_ext2fs.o $(BIN)/fsys_fat.o $(BIN)/fsys_iso9660.o $(BIN)/fsys_reiserfs.o $(BIN)/vfs.o
FILO_OBJS+= $(BIN)/fsys_jfs.o $(BIN)/fsys_minix.o $(BIN)/fsys_xfs.o
FILO_OBJS+= $(BIN)/elfload.o $(BIN)/elfnote.o $(BIN)/filo_x.o $(BIN)/lib.o $(BIN)/linuxbios_x.o $(BIN)/malloc_x.o $(BIN)/printf_x.o $(BIN)/console_x.o
FILO_OBJS+= $(BIN)/context.o $(BIN)/linux_load.o $(BIN)/segment.o $(BIN)/sys_info.o $(BIN)/switch.o
FILO_OBJS+= $(BIN)/debug_x.o $(BIN)/scsi_cmds.o $(BIN)/uhci.o $(BIN)/usb.o $(BIN)/ohci.o $(BIN)/usb_scsi_low.o $(BIN)/usb_x.o
BLIB= $(BIN)/bootlib.a
FILOLIB= $(BIN)/filolib.a
LIBS= $(BLIB)
ifdef INCLUDE_FILO
LIBS+= $(FILOLIB)
endif
UTILS+= $(BIN)/nrv2b
STDDEPS= $(START) $(UTILS)
# MAKEDEPS is the one target that is depended by all ROMs, so we check gcc here
# If you are confident that gcc 2.96 works for you, you can remove the lines
# that check gcc in the toolcheck rule
MAKEDEPS+= Makefile Makefile.main Config genrules.pl Families
MAKEDEPS+= $(BIN)/toolcheck
MAKEDEPS+= arch/$(ARCH)/Makefile arch/$(ARCH)/Config
# Start of targets
.PHONY: noargs
noargs: $(BIN)/toolcheck
@echo '===================================================='
@echo 'No target specified. To specify a target, do: '
@echo
@echo ' $(MAKE) bin/<rom-name>.<output-format> '
@echo
@echo 'where <output-format> is one of {zdsk, zrom, iso, liso, zlilo, zpxe, elf, com}'
@echo
@echo 'or: '
@echo
@echo ' $(MAKE) all<output-format>s'
@echo
@echo 'to generate all possible images of format <output-format>'
@echo
@echo 'For example, '
@echo
@echo ' make allzroms '
@echo
@echo 'will generate all possible .zrom (rom burnable) images, and'
@echo
@echo ' make allzdsks'
@echo
@echo 'will generate all possible .zdsk (bootable floppy) images, or'
@echo
@echo '===================================================='
@exit 1
$(BIN)/toolcheck: Makefile Config
@if $(CC) -v 2>&1 | grep -is 'gcc version 2\.96' > /dev/null; \
then \
echo 'gcc 2.96 is unsuitable for compiling Etherboot'; \
echo 'Use gcc 2.95 or gcc 3.x instead'; \
exit 1; \
else \
touch $(BIN)/toolcheck; \
fi; \
if [ `perl -e 'use bytes; print chr(255)' | wc -c` = 2 ]; \
then \
echo 'Your Perl version has a Unicode handling bug'; \
echo 'To workaround, execute this before compiling Etherboot:'; \
echo 'export LANG=$${LANG%.UTF-8}'; \
exit 1; \
fi
include arch/$(ARCH)/Makefile
# Common files
$(BLIB): $(BOBJS)
$(AR) r $@ $(BOBJS)
$(RANLIB) $@
$(FILOLIB): $(FILO_OBJS)
$(AR) r $@ $(FILO_OBJS)
$(RANLIB) $@
# LinuxBIOS support code
$(BIN)/linuxbios.o: firmware/linuxbios/linuxbios.c include/etherboot.h include/dev.h firmware/linuxbios/linuxbios_tables.h
# Do not add driver specific dependencies here unless it's something the
# genrules.pl script *can't* deal with, i.e. if it is not C code.
$(FILO)/config.h: $(FILO)/Config
/bin/echo -e '/* GENERATED FILE, DO NOT EDIT */\n' >$@
sed -e 's/#.*//' -e '/=/!d' -e 's/\([^[:space:]]*\)[[:space:]]*=[[:space:]]*\(.*\).*/#define \1 \2/' -e 's/^#define \([^ ]*\) 0$$/#undef \1/' $^ >>$@
filo_version: $(FILO)/main/version.h
$(FILO)/main/version.h: FORCE
echo '#define PROGRAM_NAME "$(FILO_PROGRAM_NAME)"' > $@
echo '#define PROGRAM_VERSION "$(FILO_PROGRAM_VERSION) $(FILO_BUILD_INFO)"' >> $@
FORCE:
# Utilities
$(BIN)/lzhuf: util/lzhuf.c
$(HOST_CC) -O2 -DENCODE -DDECODE -DMAIN -DVERBOSE -o $@ $<
# Roms file
# Builds almost silently because this rule is triggered for just about
# every modification to sources.
$(BIN)/Roms $(BIN)/NIC: genrules.pl Families $(SRCS)
@mkdir -p $(@D)
@echo Scanning for ROMs and dependencies...
@$(PERL) ./genrules.pl Families $(BIN)/NIC $(ARCH) $(SRCS) > $(BIN)/Roms
# Pattern Rules
# general rules for compiling/assembling source files
$(BIN)/%.o: core/%.c $(MAKEDEPS)
$(CC) $(CFLAGS) -o $@ -c $<
$(BIN)/%.s: core/%.c $(MAKEDEPS)
$(CC) $(CFLAGS) -S -o $@ -c $<
$(BIN)/%.o: drivers/disk/%.c $(MAKEDEPS)
$(CC) $(CFLAGS) -o $@ -c $<
$(BIN)/%.o: drivers/net/%.c $(MAKEDEPS)
$(CC) $(CFLAGS) -o $@ -c $<
$(BIN)/%.o: firmware/linuxbios/%.c $(MAKEDEPS)
$(CC) $(CFLAGS) -o $@ -c $<
$(BIN)/%.o: $(FILO)/drivers/%.c $(MAKEDEPS) $(FILO)/config.h
$(CC) $(CFLAGS) -imacros $(FILO)/config.h -o $@ -c $<
$(BIN)/%.o: $(FILO)/fs/%.c $(MAKEDEPS) $(FILO)/config.h
$(CC) $(CFLAGS) -imacros $(FILO)/config.h -o $@ -c $<
$(BIN)/%.o: $(FILO)/$(ARCH)/%.c $(MAKEDEPS) $(FILO)/config.h
$(CC) $(CFLAGS) -imacros $(FILO)/config.h -o $@ -c $<
$(BIN)/%.o: $(FILO)/$(ARCH)/%.S $(MAKEDEPS) $(FILO)/config.h
$(CC) $(ASFLAGS_X) $(CPPFLAGS) -c $< -o $@
$(BIN)/%.o: $(FILO)/main/%.c $(MAKEDEPS) $(FILO)/config.h filo_version
$(CC) $(CFLAGS) -imacros $(FILO)/config.h -o $@ -c $<
$(BIN)/%.o: $(FILO)/usb/%.c $(MAKEDEPS) $(FILO)/config.h
$(CC) $(CFLAGS) -imacros $(FILO)/config.h -o $@ -c $<
# Rule for the super etherboot image.
$(BIN)/etherboot.o: $(DOBJS)
$(LD) $(LDFLAGS) -r $(DOBJS) -o $@
$(BIN)/etherboot-pci.o: $(PCIOBJS)
$(LD) $(LDFLAGS) -r $(PCIOBJS) -o $@
# General rules for generating runtime (rt) files
$(BIN)/%.rt.o: $(BIN)/%.o $(START) $(BIN)/config.o $(LIBS) $(STDDEPS) $(MAKEDEPS)
$(LD) $(LDFLAGS) -r $(START) $(BIN)/config.o $< $(LIBS) -o $@
# Rule for $(BIN)/%.FORMAT.rt is architecture and target-format specific
$(BIN)/%.rt.bin: $(BIN)/%.rt $(MAKEDEPS)
$(OBJCOPY) -O binary -R .prefix $< $@
$(BIN)/%.rt1.bin: $(BIN)/%.rt $(MAKEDEPS)
$(OBJCOPY) -O binary -j .text.nocompress $< $@
$(BIN)/%.rt2.bin: $(BIN)/%.rt $(MAKEDEPS)
$(OBJCOPY) -O binary -R .prefix -R .text.nocompress $< $@
# Rules for generating prefix binary files
# Rule for $(BIN)/%.FORMAT.prf is architecture and target-format specific
$(BIN)/%.prf.bin: $(BIN)/%.prf $(MAKEDEPS)
$(OBJCOPY) -j .prefix -O binary $< $@
# general rule for .z (compressed binary code), may be overridden
$(BIN)/%.zbin: $(BIN)/%.bin $(BIN)/nrv2b $(MAKEDEPS)
$(BIN)/nrv2b e $< $@
# Housekeeping
clean:
$(RM) $(BIN)/*
$(RM) $(FILO)/config.h $(FILO)/main/version.h
../index.html: ../index.xhtml
(cd ..; m4 -P -DHOSTSITE=SOURCEFORGE index.xhtml > index.html)
../index-berlios.html: ../index.xhtml
(cd ..; m4 -P -DHOSTSITE=BERLIOS index.xhtml > index-berlios.html)
tarball: ../index.html ../index-berlios.html
(echo -n $(VERSION) ''; date -u +'%Y-%m-%d') > ../VERSION
(cd ../..; tar cf /tmp/etherboot-$(VERSION).tar --exclude CVS --exclude doc etherboot-$(VERSION))
bzip2 -9 < /tmp/etherboot-$(VERSION).tar > /tmp/etherboot-$(VERSION).tar.bz2
gzip -9 < /tmp/etherboot-$(VERSION).tar > /tmp/etherboot-$(VERSION).tar.gz
# Auto-incrementing build serial number. Is auto-incremented for each
# make run that specifies a final image file (e.g. bin/undi.zpxe) as a
# target, or a target of the form "all*". Enable via -DBUILD_SERIAL
# in Config.
ifneq ($(findstring -DBUILD_SERIAL,$(CFLAGS)),)
# If no make goals are specified, it means "make all"
REALGOALS = $(if $(MAKECMDGOALS),$(MAKECMDGOALS),all)
# Filter to see if there are any targets to trigger an auto-increment
BUILDGOALS = $(filter all,$(REALGOALS)) $(filter all%,$(REALGOALS)) \
$(foreach SUFFIX,$(SUFFIXES),$(filter %.$(SUFFIX),$(REALGOALS)))
ifneq ($(strip $(BUILDGOALS)),)
# This is an auto-incrementing build. Forcibly rebuild .buildserial.h
# and mark config.o as depending on it to force its rebuilding.
bin/config.o : include/.buildserial.h
.PHONY : include/.buildserial.h
endif # BUILDGOALS
include/.buildserial.h :
@if [ ! -f $@ ]; then echo '#define BUILD_SERIAL_NUM 0' > $@; fi
@perl -pi -e 's/(BUILD_SERIAL_NUM)\s+(\d+)/"$${1} ".($${2}+1)/e' $@
buildserial : include/.buildserial.h
@perl -n -e '/BUILD_SERIAL_NUM\s+(\d+)/ && ' \
-e 'print "Build serial number is $$1\n";' $<
else # -DBUILD_SERIAL
buildserial :
@echo Build serial number is disabled. Enable -DBUILD_SERIAL in Config.
endif # -DBUILD_SERIAL
bs : buildserial
version:
@echo $(VERSION)
romlimit:
@echo $(ROMLIMIT)
sources:
@echo $(SRCS)
View Git Blame Copy Permalink