636 lines
25 KiB
C
636 lines
25 KiB
C
#ifndef _IPXE_NET80211_ERR_H
|
|
#define _IPXE_NET80211_ERR_H
|
|
|
|
#include <errno.h>
|
|
#include <ipxe/ieee80211.h>
|
|
|
|
/*
|
|
* The iPXE 802.11 MAC layer.
|
|
*
|
|
* Copyright (c) 2009 Joshua Oreman <oremanj@rwcr.net>.
|
|
*/
|
|
|
|
FILE_LICENCE ( GPL2_OR_LATER_OR_UBDL );
|
|
|
|
/** @file
|
|
*
|
|
* The iPXE 802.11 MAC layer errors.
|
|
*/
|
|
|
|
/* Disambiguate the EINVAL's a bit */
|
|
#define EINVAL_PKT_TOO_SHORT __einfo_error ( EINFO_EINVAL_PKT_TOO_SHORT )
|
|
#define EINFO_EINVAL_PKT_TOO_SHORT __einfo_uniqify \
|
|
( EINFO_EINVAL, 0x01, "Packet too short" )
|
|
#define EINVAL_PKT_VERSION __einfo_error ( EINFO_EINVAL_PKT_VERSION )
|
|
#define EINFO_EINVAL_PKT_VERSION __einfo_uniqify \
|
|
( EINFO_EINVAL, 0x02, "Packet 802.11 version not supported" )
|
|
#define EINVAL_PKT_NOT_DATA __einfo_error ( EINFO_EINVAL_PKT_NOT_DATA )
|
|
#define EINFO_EINVAL_PKT_NOT_DATA __einfo_uniqify \
|
|
( EINFO_EINVAL, 0x03, "Packet not a data packet" )
|
|
#define EINVAL_PKT_NOT_FROMDS __einfo_error ( EINFO_EINVAL_PKT_NOT_FROMDS )
|
|
#define EINFO_EINVAL_PKT_NOT_FROMDS __einfo_uniqify \
|
|
( EINFO_EINVAL, 0x04, "Packet not from an Access Point" )
|
|
#define EINVAL_PKT_LLC_HEADER __einfo_error ( EINFO_EINVAL_PKT_LLC_HEADER )
|
|
#define EINFO_EINVAL_PKT_LLC_HEADER __einfo_uniqify \
|
|
( EINFO_EINVAL, 0x05, "Packet has invalid LLC header" )
|
|
#define EINVAL_CRYPTO_REQUEST __einfo_error ( EINFO_EINVAL_CRYPTO_REQUEST )
|
|
#define EINFO_EINVAL_CRYPTO_REQUEST __einfo_uniqify \
|
|
( EINFO_EINVAL, 0x06, "Packet decryption error" )
|
|
#define EINVAL_ACTIVE_SCAN __einfo_error ( EINFO_EINVAL_ACTIVE_SCAN )
|
|
#define EINFO_EINVAL_ACTIVE_SCAN __einfo_uniqify \
|
|
( EINFO_EINVAL, 0x07, "Invalid active scan requested" )
|
|
|
|
/*
|
|
* 802.11 error codes: The AP can give us a status code explaining why
|
|
* authentication failed, or a reason code explaining why we were
|
|
* deauthenticated/disassociated. These codes range from 0-63 (the
|
|
* field is 16 bits wide, but only up to 45 or so are defined yet; we
|
|
* allow up to 63 for extensibility). This is encoded into an error
|
|
* code as such:
|
|
*
|
|
* status & 0x1f goes here --vv--
|
|
* Status code 0-31: ECONNREFUSED | EUNIQ_(status & 0x1f) (0e1a6038)
|
|
* Status code 32-63: EHOSTUNREACH | EUNIQ_(status & 0x1f) (171a6011)
|
|
* Reason code 0-31: ECONNRESET | EUNIQ_(reason & 0x1f) (0f1a6039)
|
|
* Reason code 32-63: ENETRESET | EUNIQ_(reason & 0x1f) (271a6001)
|
|
*
|
|
* The POSIX error codes more or less convey the appropriate message
|
|
* (status codes occur when we can't associate at all, reason codes
|
|
* when we lose association unexpectedly) and let us extract the
|
|
* complete 802.11 error code from the rc value.
|
|
*
|
|
* The error messages follow the 802.11 standard as much as is
|
|
* feasible, but most have been abbreviated to fit the 50-character
|
|
* limit imposed by strerror().
|
|
*/
|
|
|
|
/* 802.11 status codes (IEEE Std 802.11-2007, Table 7-23) */
|
|
|
|
#define ECONNREFUSED_FAILURE __einfo_error \
|
|
( EINFO_ECONNREFUSED_FAILURE )
|
|
#define EINFO_ECONNREFUSED_FAILURE __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_FAILURE & 0x1f ), \
|
|
"Unspecified failure" )
|
|
|
|
#define ECONNREFUSED_CAPAB_UNSUPP __einfo_error \
|
|
( EINFO_ECONNREFUSED_CAPAB_UNSUPP )
|
|
#define EINFO_ECONNREFUSED_CAPAB_UNSUPP __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_CAPAB_UNSUPP & 0x1f ), \
|
|
"Cannot support all requested capabilities" )
|
|
|
|
#define ECONNREFUSED_REASSOC_INVALID __einfo_error \
|
|
( EINFO_ECONNREFUSED_REASSOC_INVALID )
|
|
#define EINFO_ECONNREFUSED_REASSOC_INVALID __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_REASSOC_INVALID & 0x1f ), \
|
|
"Reassociation denied due to lack of association" )
|
|
|
|
#define ECONNREFUSED_ASSOC_DENIED __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_DENIED )
|
|
#define EINFO_ECONNREFUSED_ASSOC_DENIED __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_DENIED & 0x1f ), \
|
|
"Association denied for another reason" )
|
|
|
|
#define ECONNREFUSED_AUTH_ALGO_UNSUPP __einfo_error \
|
|
( EINFO_ECONNREFUSED_AUTH_ALGO_UNSUPP )
|
|
#define EINFO_ECONNREFUSED_AUTH_ALGO_UNSUPP __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_AUTH_ALGO_UNSUPP & 0x1f ), \
|
|
"Authentication algorithm unsupported" )
|
|
|
|
#define ECONNREFUSED_AUTH_SEQ_INVALID __einfo_error \
|
|
( EINFO_ECONNREFUSED_AUTH_SEQ_INVALID )
|
|
#define EINFO_ECONNREFUSED_AUTH_SEQ_INVALID __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_AUTH_SEQ_INVALID & 0x1f ), \
|
|
"Authentication sequence number unexpected" )
|
|
|
|
#define ECONNREFUSED_AUTH_CHALL_INVALID __einfo_error \
|
|
( EINFO_ECONNREFUSED_AUTH_CHALL_INVALID )
|
|
#define EINFO_ECONNREFUSED_AUTH_CHALL_INVALID __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_AUTH_CHALL_INVALID & 0x1f ), \
|
|
"Authentication rejected due to challenge failure" )
|
|
|
|
#define ECONNREFUSED_AUTH_TIMEOUT __einfo_error \
|
|
( EINFO_ECONNREFUSED_AUTH_TIMEOUT )
|
|
#define EINFO_ECONNREFUSED_AUTH_TIMEOUT __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_AUTH_TIMEOUT & 0x1f ), \
|
|
"Authentication rejected due to timeout" )
|
|
|
|
#define ECONNREFUSED_ASSOC_NO_ROOM __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_NO_ROOM )
|
|
#define EINFO_ECONNREFUSED_ASSOC_NO_ROOM __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_NO_ROOM & 0x1f ), \
|
|
"Association denied because AP is out of resources" )
|
|
|
|
#define ECONNREFUSED_ASSOC_NEED_RATE __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_NEED_RATE )
|
|
#define EINFO_ECONNREFUSED_ASSOC_NEED_RATE __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_NEED_RATE & 0x1f ), \
|
|
"Association denied; basic rate support required" )
|
|
|
|
#define ECONNREFUSED_ASSOC_NEED_SHORT_PMBL __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_NEED_SHORT_PMBL )
|
|
#define EINFO_ECONNREFUSED_ASSOC_NEED_SHORT_PMBL __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_NEED_SHORT_PMBL & 0x1f ), \
|
|
"Association denied; short preamble support req'd" )
|
|
|
|
#define ECONNREFUSED_ASSOC_NEED_PBCC __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_NEED_PBCC )
|
|
#define EINFO_ECONNREFUSED_ASSOC_NEED_PBCC __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_NEED_PBCC & 0x1f ), \
|
|
"Association denied; PBCC modulation support req'd" )
|
|
|
|
#define ECONNREFUSED_ASSOC_NEED_CHAN_AGILITY __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_NEED_CHAN_AGILITY )
|
|
#define EINFO_ECONNREFUSED_ASSOC_NEED_CHAN_AGILITY __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_NEED_CHAN_AGILITY & 0x1f ), \
|
|
"Association denied; Channel Agility support req'd" )
|
|
|
|
#define ECONNREFUSED_ASSOC_NEED_SPECTRUM_MGMT __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_NEED_SPECTRUM_MGMT )
|
|
#define EINFO_ECONNREFUSED_ASSOC_NEED_SPECTRUM_MGMT __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_NEED_SPECTRUM_MGMT & 0x1f ), \
|
|
"Association denied; Spectrum Management required" )
|
|
|
|
#define ECONNREFUSED_ASSOC_BAD_POWER __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_BAD_POWER )
|
|
#define EINFO_ECONNREFUSED_ASSOC_BAD_POWER __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_BAD_POWER & 0x1f ), \
|
|
"Association denied; Power Capability unacceptable" )
|
|
|
|
#define ECONNREFUSED_ASSOC_BAD_CHANNELS __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_BAD_CHANNELS )
|
|
#define EINFO_ECONNREFUSED_ASSOC_BAD_CHANNELS __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_BAD_CHANNELS & 0x1f ), \
|
|
"Association denied; Supported Channels unacceptable" )
|
|
|
|
#define ECONNREFUSED_ASSOC_NEED_SHORT_SLOT __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_NEED_SHORT_SLOT )
|
|
#define EINFO_ECONNREFUSED_ASSOC_NEED_SHORT_SLOT __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_NEED_SHORT_SLOT & 0x1f ), \
|
|
"Association denied; Short Slot Tume support req'd" )
|
|
|
|
#define ECONNREFUSED_ASSOC_NEED_DSSS_OFDM __einfo_error \
|
|
( EINFO_ECONNREFUSED_ASSOC_NEED_DSSS_OFDM )
|
|
#define EINFO_ECONNREFUSED_ASSOC_NEED_DSSS_OFDM __einfo_uniqify \
|
|
( EINFO_ECONNREFUSED, \
|
|
( IEEE80211_STATUS_ASSOC_NEED_DSSS_OFDM & 0x1f ), \
|
|
"Association denied; DSSS-OFDM support required" )
|
|
|
|
#define EHOSTUNREACH_QOS_FAILURE __einfo_error \
|
|
( EINFO_EHOSTUNREACH_QOS_FAILURE )
|
|
#define EINFO_EHOSTUNREACH_QOS_FAILURE __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_QOS_FAILURE & 0x1f ), \
|
|
"Unspecified, QoS-related failure" )
|
|
|
|
#define EHOSTUNREACH_QOS_NO_ROOM __einfo_error \
|
|
( EINFO_EHOSTUNREACH_QOS_NO_ROOM )
|
|
#define EINFO_EHOSTUNREACH_QOS_NO_ROOM __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_QOS_NO_ROOM & 0x1f ), \
|
|
"Association denied; QoS AP out of QoS resources" )
|
|
|
|
#define EHOSTUNREACH_LINK_IS_HORRIBLE __einfo_error \
|
|
( EINFO_EHOSTUNREACH_LINK_IS_HORRIBLE )
|
|
#define EINFO_EHOSTUNREACH_LINK_IS_HORRIBLE __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_LINK_IS_HORRIBLE & 0x1f ), \
|
|
"Association denied due to excessively poor link" )
|
|
|
|
#define EHOSTUNREACH_ASSOC_NEED_QOS __einfo_error \
|
|
( EINFO_EHOSTUNREACH_ASSOC_NEED_QOS )
|
|
#define EINFO_EHOSTUNREACH_ASSOC_NEED_QOS __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_ASSOC_NEED_QOS & 0x1f ), \
|
|
"Association denied; QoS support required" )
|
|
|
|
#define EHOSTUNREACH_REQUEST_DECLINED __einfo_error \
|
|
( EINFO_EHOSTUNREACH_REQUEST_DECLINED )
|
|
#define EINFO_EHOSTUNREACH_REQUEST_DECLINED __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_REQUEST_DECLINED & 0x1f ), \
|
|
"The request has been declined" )
|
|
|
|
#define EHOSTUNREACH_REQUEST_INVALID __einfo_error \
|
|
( EINFO_EHOSTUNREACH_REQUEST_INVALID )
|
|
#define EINFO_EHOSTUNREACH_REQUEST_INVALID __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_REQUEST_INVALID & 0x1f ), \
|
|
"Request unsuccessful due to invalid parameters" )
|
|
|
|
#define EHOSTUNREACH_TS_NOT_CREATED_AGAIN __einfo_error \
|
|
( EINFO_EHOSTUNREACH_TS_NOT_CREATED_AGAIN )
|
|
#define EINFO_EHOSTUNREACH_TS_NOT_CREATED_AGAIN __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_TS_NOT_CREATED_AGAIN & 0x1f ), \
|
|
"TS not created due to bad specification" )
|
|
|
|
#define EHOSTUNREACH_INVALID_IE __einfo_error \
|
|
( EINFO_EHOSTUNREACH_INVALID_IE )
|
|
#define EINFO_EHOSTUNREACH_INVALID_IE __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_INVALID_IE & 0x1f ), \
|
|
"Invalid information element" )
|
|
|
|
#define EHOSTUNREACH_GROUP_CIPHER_INVALID __einfo_error \
|
|
( EINFO_EHOSTUNREACH_GROUP_CIPHER_INVALID )
|
|
#define EINFO_EHOSTUNREACH_GROUP_CIPHER_INVALID __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_GROUP_CIPHER_INVALID & 0x1f ), \
|
|
"Invalid group cipher" )
|
|
|
|
#define EHOSTUNREACH_PAIR_CIPHER_INVALID __einfo_error \
|
|
( EINFO_EHOSTUNREACH_PAIR_CIPHER_INVALID )
|
|
#define EINFO_EHOSTUNREACH_PAIR_CIPHER_INVALID __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_PAIR_CIPHER_INVALID & 0x1f ), \
|
|
"Invalid pairwise cipher" )
|
|
|
|
#define EHOSTUNREACH_AKMP_INVALID __einfo_error \
|
|
( EINFO_EHOSTUNREACH_AKMP_INVALID )
|
|
#define EINFO_EHOSTUNREACH_AKMP_INVALID __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_AKMP_INVALID & 0x1f ), \
|
|
"Invalid AKMP" )
|
|
|
|
#define EHOSTUNREACH_RSN_VERSION_UNSUPP __einfo_error \
|
|
( EINFO_EHOSTUNREACH_RSN_VERSION_UNSUPP )
|
|
#define EINFO_EHOSTUNREACH_RSN_VERSION_UNSUPP __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_RSN_VERSION_UNSUPP & 0x1f ), \
|
|
"Unsupported RSN information element version" )
|
|
|
|
#define EHOSTUNREACH_RSN_CAPAB_INVALID __einfo_error \
|
|
( EINFO_EHOSTUNREACH_RSN_CAPAB_INVALID )
|
|
#define EINFO_EHOSTUNREACH_RSN_CAPAB_INVALID __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_RSN_CAPAB_INVALID & 0x1f ), \
|
|
"Invalid RSN information element capabilities" )
|
|
|
|
#define EHOSTUNREACH_CIPHER_REJECTED __einfo_error \
|
|
( EINFO_EHOSTUNREACH_CIPHER_REJECTED )
|
|
#define EINFO_EHOSTUNREACH_CIPHER_REJECTED __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_CIPHER_REJECTED & 0x1f ), \
|
|
"Cipher suite rejected because of security policy" )
|
|
|
|
#define EHOSTUNREACH_TS_NOT_CREATED_WAIT __einfo_error \
|
|
( EINFO_EHOSTUNREACH_TS_NOT_CREATED_WAIT )
|
|
#define EINFO_EHOSTUNREACH_TS_NOT_CREATED_WAIT __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_TS_NOT_CREATED_WAIT & 0x1f ), \
|
|
"TS not created due to insufficient delay" )
|
|
|
|
#define EHOSTUNREACH_DIRECT_LINK_FORBIDDEN __einfo_error \
|
|
( EINFO_EHOSTUNREACH_DIRECT_LINK_FORBIDDEN )
|
|
#define EINFO_EHOSTUNREACH_DIRECT_LINK_FORBIDDEN __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_DIRECT_LINK_FORBIDDEN & 0x1f ), \
|
|
"Direct link is not allowed in the BSS by policy" )
|
|
|
|
#define EHOSTUNREACH_DEST_NOT_PRESENT __einfo_error \
|
|
( EINFO_EHOSTUNREACH_DEST_NOT_PRESENT )
|
|
#define EINFO_EHOSTUNREACH_DEST_NOT_PRESENT __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_DEST_NOT_PRESENT & 0x1f ), \
|
|
"The Destination STA is not present within the BSS" )
|
|
|
|
#define EHOSTUNREACH_DEST_NOT_QOS __einfo_error \
|
|
( EINFO_EHOSTUNREACH_DEST_NOT_QOS )
|
|
#define EINFO_EHOSTUNREACH_DEST_NOT_QOS __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_DEST_NOT_QOS & 0x1f ), \
|
|
"The Destination STA is not a QoS STA" )
|
|
|
|
#define EHOSTUNREACH_ASSOC_LISTEN_TOO_HIGH __einfo_error \
|
|
( EINFO_EHOSTUNREACH_ASSOC_LISTEN_TOO_HIGH )
|
|
#define EINFO_EHOSTUNREACH_ASSOC_LISTEN_TOO_HIGH __einfo_uniqify \
|
|
( EINFO_EHOSTUNREACH, \
|
|
( IEEE80211_STATUS_ASSOC_LISTEN_TOO_HIGH & 0x1f ), \
|
|
"Association denied; Listen Interval is too large" )
|
|
|
|
/* 802.11 reason codes (IEEE Std 802.11-2007, Table 7-22) */
|
|
|
|
#define ECONNRESET_UNSPECIFIED __einfo_error \
|
|
( EINFO_ECONNRESET_UNSPECIFIED )
|
|
#define EINFO_ECONNRESET_UNSPECIFIED __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_UNSPECIFIED & 0x1f ), \
|
|
"Unspecified reason" )
|
|
|
|
#define ECONNRESET_AUTH_NO_LONGER_VALID __einfo_error \
|
|
( EINFO_ECONNRESET_AUTH_NO_LONGER_VALID )
|
|
#define EINFO_ECONNRESET_AUTH_NO_LONGER_VALID __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_AUTH_NO_LONGER_VALID & 0x1f ), \
|
|
"Previous authentication no longer valid" )
|
|
|
|
#define ECONNRESET_LEAVING __einfo_error \
|
|
( EINFO_ECONNRESET_LEAVING )
|
|
#define EINFO_ECONNRESET_LEAVING __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_LEAVING & 0x1f ), \
|
|
"Deauthenticated due to leaving network" )
|
|
|
|
#define ECONNRESET_INACTIVITY __einfo_error \
|
|
( EINFO_ECONNRESET_INACTIVITY )
|
|
#define EINFO_ECONNRESET_INACTIVITY __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_INACTIVITY & 0x1f ), \
|
|
"Disassociated due to inactivity" )
|
|
|
|
#define ECONNRESET_OUT_OF_RESOURCES __einfo_error \
|
|
( EINFO_ECONNRESET_OUT_OF_RESOURCES )
|
|
#define EINFO_ECONNRESET_OUT_OF_RESOURCES __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_OUT_OF_RESOURCES & 0x1f ), \
|
|
"Disassociated because AP is out of resources" )
|
|
|
|
#define ECONNRESET_NEED_AUTH __einfo_error \
|
|
( EINFO_ECONNRESET_NEED_AUTH )
|
|
#define EINFO_ECONNRESET_NEED_AUTH __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_NEED_AUTH & 0x1f ), \
|
|
"Class 2 frame received from nonauthenticated STA" )
|
|
|
|
#define ECONNRESET_NEED_ASSOC __einfo_error \
|
|
( EINFO_ECONNRESET_NEED_ASSOC )
|
|
#define EINFO_ECONNRESET_NEED_ASSOC __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_NEED_ASSOC & 0x1f ), \
|
|
"Class 3 frame received from nonassociated STA" )
|
|
|
|
#define ECONNRESET_LEAVING_TO_ROAM __einfo_error \
|
|
( EINFO_ECONNRESET_LEAVING_TO_ROAM )
|
|
#define EINFO_ECONNRESET_LEAVING_TO_ROAM __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_LEAVING_TO_ROAM & 0x1f ), \
|
|
"Disassociated due to roaming" )
|
|
|
|
#define ECONNRESET_REASSOC_INVALID __einfo_error \
|
|
( EINFO_ECONNRESET_REASSOC_INVALID )
|
|
#define EINFO_ECONNRESET_REASSOC_INVALID __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_REASSOC_INVALID & 0x1f ), \
|
|
"STA requesting (re)association not authenticated" )
|
|
|
|
#define ECONNRESET_BAD_POWER __einfo_error \
|
|
( EINFO_ECONNRESET_BAD_POWER )
|
|
#define EINFO_ECONNRESET_BAD_POWER __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_BAD_POWER & 0x1f ), \
|
|
"Disassociated; Power Capability unacceptable" )
|
|
|
|
#define ECONNRESET_BAD_CHANNELS __einfo_error \
|
|
( EINFO_ECONNRESET_BAD_CHANNELS )
|
|
#define EINFO_ECONNRESET_BAD_CHANNELS __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_BAD_CHANNELS & 0x1f ), \
|
|
"Disassociated; Supported Channels unacceptable" )
|
|
|
|
#define ECONNRESET_INVALID_IE __einfo_error \
|
|
( EINFO_ECONNRESET_INVALID_IE )
|
|
#define EINFO_ECONNRESET_INVALID_IE __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_INVALID_IE & 0x1f ), \
|
|
"Invalid information element" )
|
|
|
|
#define ECONNRESET_MIC_FAILURE __einfo_error \
|
|
( EINFO_ECONNRESET_MIC_FAILURE )
|
|
#define EINFO_ECONNRESET_MIC_FAILURE __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_MIC_FAILURE & 0x1f ), \
|
|
"Message integrity code (MIC) failure" )
|
|
|
|
#define ECONNRESET_4WAY_TIMEOUT __einfo_error \
|
|
( EINFO_ECONNRESET_4WAY_TIMEOUT )
|
|
#define EINFO_ECONNRESET_4WAY_TIMEOUT __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_4WAY_TIMEOUT & 0x1f ), \
|
|
"4-Way Handshake timeout" )
|
|
|
|
#define ECONNRESET_GROUPKEY_TIMEOUT __einfo_error \
|
|
( EINFO_ECONNRESET_GROUPKEY_TIMEOUT )
|
|
#define EINFO_ECONNRESET_GROUPKEY_TIMEOUT __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_GROUPKEY_TIMEOUT & 0x1f ), \
|
|
"Group Key Handshake timeout" )
|
|
|
|
#define ECONNRESET_4WAY_INVALID __einfo_error \
|
|
( EINFO_ECONNRESET_4WAY_INVALID )
|
|
#define EINFO_ECONNRESET_4WAY_INVALID __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_4WAY_INVALID & 0x1f ), \
|
|
"4-Way Handshake information element changed unduly" )
|
|
|
|
#define ECONNRESET_GROUP_CIPHER_INVALID __einfo_error \
|
|
( EINFO_ECONNRESET_GROUP_CIPHER_INVALID )
|
|
#define EINFO_ECONNRESET_GROUP_CIPHER_INVALID __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_GROUP_CIPHER_INVALID & 0x1f ), \
|
|
"Invalid group cipher" )
|
|
|
|
#define ECONNRESET_PAIR_CIPHER_INVALID __einfo_error \
|
|
( EINFO_ECONNRESET_PAIR_CIPHER_INVALID )
|
|
#define EINFO_ECONNRESET_PAIR_CIPHER_INVALID __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_PAIR_CIPHER_INVALID & 0x1f ), \
|
|
"Invalid pairwise cipher" )
|
|
|
|
#define ECONNRESET_AKMP_INVALID __einfo_error \
|
|
( EINFO_ECONNRESET_AKMP_INVALID )
|
|
#define EINFO_ECONNRESET_AKMP_INVALID __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_AKMP_INVALID & 0x1f ), \
|
|
"Invalid AKMP" )
|
|
|
|
#define ECONNRESET_RSN_VERSION_INVALID __einfo_error \
|
|
( EINFO_ECONNRESET_RSN_VERSION_INVALID )
|
|
#define EINFO_ECONNRESET_RSN_VERSION_INVALID __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_RSN_VERSION_INVALID & 0x1f ), \
|
|
"Unsupported RSN information element version" )
|
|
|
|
#define ECONNRESET_RSN_CAPAB_INVALID __einfo_error \
|
|
( EINFO_ECONNRESET_RSN_CAPAB_INVALID )
|
|
#define EINFO_ECONNRESET_RSN_CAPAB_INVALID __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_RSN_CAPAB_INVALID & 0x1f ), \
|
|
"Invalid RSN information element capabilities" )
|
|
|
|
#define ECONNRESET_8021X_FAILURE __einfo_error \
|
|
( EINFO_ECONNRESET_8021X_FAILURE )
|
|
#define EINFO_ECONNRESET_8021X_FAILURE __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_8021X_FAILURE & 0x1f ), \
|
|
"IEEE 802.1X authentication failed" )
|
|
|
|
#define ECONNRESET_CIPHER_REJECTED __einfo_error \
|
|
( EINFO_ECONNRESET_CIPHER_REJECTED )
|
|
#define EINFO_ECONNRESET_CIPHER_REJECTED __einfo_uniqify \
|
|
( EINFO_ECONNRESET, \
|
|
( IEEE80211_REASON_CIPHER_REJECTED & 0x1f ), \
|
|
"Cipher suite rejected because of security policy" )
|
|
|
|
#define ENETRESET_QOS_UNSPECIFIED __einfo_error \
|
|
( EINFO_ENETRESET_QOS_UNSPECIFIED )
|
|
#define EINFO_ENETRESET_QOS_UNSPECIFIED __einfo_uniqify \
|
|
( EINFO_ENETRESET, \
|
|
( IEEE80211_REASON_QOS_UNSPECIFIED & 0x1f ), \
|
|
"Disassociated for unspecified, QoS-related reason" )
|
|
|
|
#define ENETRESET_QOS_OUT_OF_RESOURCES __einfo_error \
|
|
( EINFO_ENETRESET_QOS_OUT_OF_RESOURCES )
|
|
#define EINFO_ENETRESET_QOS_OUT_OF_RESOURCES __einfo_uniqify \
|
|
( EINFO_ENETRESET, \
|
|
( IEEE80211_REASON_QOS_OUT_OF_RESOURCES & 0x1f ), \
|
|
"Disassociated; QoS AP is out of QoS resources" )
|
|
|
|
#define ENETRESET_LINK_IS_HORRIBLE __einfo_error \
|
|
( EINFO_ENETRESET_LINK_IS_HORRIBLE )
|
|
#define EINFO_ENETRESET_LINK_IS_HORRIBLE __einfo_uniqify \
|
|
( EINFO_ENETRESET, \
|
|
( IEEE80211_REASON_LINK_IS_HORRIBLE & 0x1f ), \
|
|
"Disassociated due to excessively poor link" )
|
|
|
|
#define ENETRESET_INVALID_TXOP __einfo_error \
|
|
( EINFO_ENETRESET_INVALID_TXOP )
|
|
#define EINFO_ENETRESET_INVALID_TXOP __einfo_uniqify \
|
|
( EINFO_ENETRESET, \
|
|
( IEEE80211_REASON_INVALID_TXOP & 0x1f ), \
|
|
"Disassociated due to TXOP limit violation" )
|
|
|
|
#define ENETRESET_REQUESTED_LEAVING __einfo_error \
|
|
( EINFO_ENETRESET_REQUESTED_LEAVING )
|
|
#define EINFO_ENETRESET_REQUESTED_LEAVING __einfo_uniqify \
|
|
( EINFO_ENETRESET, \
|
|
( IEEE80211_REASON_REQUESTED_LEAVING & 0x1f ), \
|
|
"Requested; STA is leaving the BSS (or resetting)" )
|
|
|
|
#define ENETRESET_REQUESTED_NO_USE __einfo_error \
|
|
( EINFO_ENETRESET_REQUESTED_NO_USE )
|
|
#define EINFO_ENETRESET_REQUESTED_NO_USE __einfo_uniqify \
|
|
( EINFO_ENETRESET, \
|
|
( IEEE80211_REASON_REQUESTED_NO_USE & 0x1f ), \
|
|
"Requested; does not want to use the mechanism" )
|
|
|
|
#define ENETRESET_REQUESTED_NEED_SETUP __einfo_error \
|
|
( EINFO_ENETRESET_REQUESTED_NEED_SETUP )
|
|
#define EINFO_ENETRESET_REQUESTED_NEED_SETUP __einfo_uniqify \
|
|
( EINFO_ENETRESET, \
|
|
( IEEE80211_REASON_REQUESTED_NEED_SETUP & 0x1f ), \
|
|
"Requested; setup is required" )
|
|
|
|
#define ENETRESET_REQUESTED_TIMEOUT __einfo_error \
|
|
( EINFO_ENETRESET_REQUESTED_TIMEOUT )
|
|
#define EINFO_ENETRESET_REQUESTED_TIMEOUT __einfo_uniqify \
|
|
( EINFO_ENETRESET, \
|
|
( IEEE80211_REASON_REQUESTED_TIMEOUT & 0x1f ), \
|
|
"Requested from peer STA due to timeout" )
|
|
|
|
#define ENETRESET_CIPHER_UNSUPPORTED __einfo_error \
|
|
( EINFO_ENETRESET_CIPHER_UNSUPPORTED )
|
|
#define EINFO_ENETRESET_CIPHER_UNSUPPORTED __einfo_uniqify \
|
|
( EINFO_ENETRESET, \
|
|
( IEEE80211_REASON_CIPHER_UNSUPPORTED & 0x1f ), \
|
|
"Peer STA does not support requested cipher suite" )
|
|
|
|
/** Make return status code from 802.11 status code */
|
|
#define E80211_STATUS( stat ) \
|
|
( ( (stat) & 0x20 ) ? \
|
|
EUNIQ ( EINFO_EHOSTUNREACH, ( (stat) & 0x1f ), \
|
|
EHOSTUNREACH_QOS_FAILURE, \
|
|
EHOSTUNREACH_QOS_NO_ROOM, \
|
|
EHOSTUNREACH_LINK_IS_HORRIBLE, \
|
|
EHOSTUNREACH_ASSOC_NEED_QOS, \
|
|
EHOSTUNREACH_REQUEST_DECLINED, \
|
|
EHOSTUNREACH_REQUEST_INVALID, \
|
|
EHOSTUNREACH_TS_NOT_CREATED_AGAIN, \
|
|
EHOSTUNREACH_INVALID_IE, \
|
|
EHOSTUNREACH_GROUP_CIPHER_INVALID, \
|
|
EHOSTUNREACH_PAIR_CIPHER_INVALID, \
|
|
EHOSTUNREACH_AKMP_INVALID, \
|
|
EHOSTUNREACH_RSN_VERSION_UNSUPP, \
|
|
EHOSTUNREACH_RSN_CAPAB_INVALID, \
|
|
EHOSTUNREACH_CIPHER_REJECTED, \
|
|
EHOSTUNREACH_TS_NOT_CREATED_WAIT, \
|
|
EHOSTUNREACH_DIRECT_LINK_FORBIDDEN, \
|
|
EHOSTUNREACH_DEST_NOT_PRESENT, \
|
|
EHOSTUNREACH_DEST_NOT_QOS, \
|
|
EHOSTUNREACH_ASSOC_LISTEN_TOO_HIGH ) : \
|
|
EUNIQ ( EINFO_ECONNREFUSED, ( (stat) & 0x1f ), \
|
|
ECONNREFUSED_FAILURE, \
|
|
ECONNREFUSED_CAPAB_UNSUPP, \
|
|
ECONNREFUSED_REASSOC_INVALID, \
|
|
ECONNREFUSED_ASSOC_DENIED, \
|
|
ECONNREFUSED_AUTH_ALGO_UNSUPP, \
|
|
ECONNREFUSED_AUTH_SEQ_INVALID, \
|
|
ECONNREFUSED_AUTH_CHALL_INVALID, \
|
|
ECONNREFUSED_AUTH_TIMEOUT, \
|
|
ECONNREFUSED_ASSOC_NO_ROOM, \
|
|
ECONNREFUSED_ASSOC_NEED_RATE, \
|
|
ECONNREFUSED_ASSOC_NEED_SHORT_PMBL, \
|
|
ECONNREFUSED_ASSOC_NEED_PBCC, \
|
|
ECONNREFUSED_ASSOC_NEED_CHAN_AGILITY, \
|
|
ECONNREFUSED_ASSOC_NEED_SPECTRUM_MGMT, \
|
|
ECONNREFUSED_ASSOC_BAD_POWER, \
|
|
ECONNREFUSED_ASSOC_BAD_CHANNELS, \
|
|
ECONNREFUSED_ASSOC_NEED_SHORT_SLOT, \
|
|
ECONNREFUSED_ASSOC_NEED_DSSS_OFDM ) )
|
|
|
|
/** Make return status code from 802.11 reason code */
|
|
#define E80211_REASON( reas ) \
|
|
( ( (reas) & 0x20 ) ? \
|
|
EUNIQ ( EINFO_ENETRESET, ( (reas) & 0x1f ), \
|
|
ENETRESET_QOS_UNSPECIFIED, \
|
|
ENETRESET_QOS_OUT_OF_RESOURCES, \
|
|
ENETRESET_LINK_IS_HORRIBLE, \
|
|
ENETRESET_INVALID_TXOP, \
|
|
ENETRESET_REQUESTED_LEAVING, \
|
|
ENETRESET_REQUESTED_NO_USE, \
|
|
ENETRESET_REQUESTED_NEED_SETUP, \
|
|
ENETRESET_REQUESTED_TIMEOUT, \
|
|
ENETRESET_CIPHER_UNSUPPORTED ) : \
|
|
EUNIQ ( EINFO_ECONNRESET, ( (reas) & 0x1f ), \
|
|
ECONNRESET_UNSPECIFIED, \
|
|
ECONNRESET_AUTH_NO_LONGER_VALID, \
|
|
ECONNRESET_LEAVING, \
|
|
ECONNRESET_INACTIVITY, \
|
|
ECONNRESET_OUT_OF_RESOURCES, \
|
|
ECONNRESET_NEED_AUTH, \
|
|
ECONNRESET_NEED_ASSOC, \
|
|
ECONNRESET_LEAVING_TO_ROAM, \
|
|
ECONNRESET_REASSOC_INVALID, \
|
|
ECONNRESET_BAD_POWER, \
|
|
ECONNRESET_BAD_CHANNELS, \
|
|
ECONNRESET_INVALID_IE, \
|
|
ECONNRESET_MIC_FAILURE, \
|
|
ECONNRESET_4WAY_TIMEOUT, \
|
|
ECONNRESET_GROUPKEY_TIMEOUT, \
|
|
ECONNRESET_4WAY_INVALID, \
|
|
ECONNRESET_GROUP_CIPHER_INVALID, \
|
|
ECONNRESET_PAIR_CIPHER_INVALID, \
|
|
ECONNRESET_AKMP_INVALID, \
|
|
ECONNRESET_RSN_VERSION_INVALID, \
|
|
ECONNRESET_RSN_CAPAB_INVALID, \
|
|
ECONNRESET_8021X_FAILURE, \
|
|
ECONNRESET_CIPHER_REJECTED ) )
|
|
|
|
#endif /* _IPXE_NET80211_ERR_H */
|