The getopt API defines optind as a global variable. When used by the
"autoboot" command, the payload function passed to ifcommon_exec() may
result in a new iPXE script being executed; the commands therein would
then overwrite the value of optind. On returning, ifcommon_exec()
would continue processing the list of interfaces from an undefined
point.
Fix by using a local variable to hold the index within the list of
interfaces.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add support for page up, page down, home and end keys, matching the
navigation logic used in the menu user interface.
Originally-implemented-by: Marin Hannache <git@mareo.fr>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add a facility for settings blocks to act as symbolic links to other
settings blocks, and reimplement the "netX" virtual settings block
using this facility.
The primary advantage of this approach is that unscoped settings such
as ${mac} and ${filename} will now reflect the settings obtained from
the most recently opened network device: in most cases, this will mean
the settings obtained from the most recent DHCP attempt. This should
improve conformance to the principle of least astonishment.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Abstract out the ability to reboot the system to a separate reboot()
function (with platform-specific implementations), add an EFI
implementation, and make the existing "reboot" command available under
EFI.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Nothing currently prevents a menu separator from being assigned a
shortcut key, and then from being selected using that shortcut key.
This produces an inconsistency in the user interface, since separators
cannot be selected by other means of menu navigation (arrow keys, page
up/down, etc).
It would be trivial to prevent separators from being assigned shortcut
keys, but this would eliminate one potentially useful use case: having
a large menu and using shortcut keys to jump to a section within the
menu.
Fix by treating a shortcut key on a separator as equivalent to "select
the separator, then press the down arrow key". This has the effect of
moving to the first non-separator menu item following the specified
separator, which is probably the most intuitive behaviour. (The
existing logic for moving the selection already handles the various
nasty corner cases such as a menu ending with one or more separators.)
Reported-by: Ján ONDREJ (SAL) <ondrejj@salstar.sk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Unrecognised keys may be returned by getkey() as character code zero,
which currently matches against the first menu item with no shortcut
key defined.
Prevent this unintended behaviour by explicitly checking that the menu
item has a defined shortcut key.
Reported-by: Ján ONDREJ (SAL) <ondrejj@salstar.sk>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When prompting the user to enter a setting value via the "read"
command, prefill the input buffer with the setting's current value.
Requested-by: Ján Ondrej (SAL) <ondrejj@salstar.ks>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When fetching a named setting using a name that does not explicitly
specify a type, default to using the type stored when the setting was
created, rather than always defaulting to "string". This allows the
behaviour of user-defined settings to match the behaviour of
predefined settings (which have a sensible default type).
For example:
set server:ipv4 192.168.0.1
echo ${server}
will now print "192.168.0.1", rather than trying to print out the raw
IPv4 address bytes as a string.
The downside of this change is that existing tricks for printing
special characters within scripts may require (backwards-compatible)
modification. For example, the "clear screen" sequence:
set esc:hex 1b
set cls ${esc}[2J
echo ${cls}
will now have to become
set esc:hex 1b
set cls ${esc:string}[2J # Must now explicitly specify ":string"
echo ${cls}
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose image tail-recursion to iPXE scripts via the "--replace"
option. This functions similarly to exec() under Unix: the
currently-executing script is replaced with the new image (as opposed
to running the new image as a subroutine).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A reasonably large (512MB) file transferred via HTTP over Gigabit
Ethernet should complete in around 4.6 seconds. Increase the
resolution of the "time" command to tenths of a second, to allow such
transfers to be meaningfully measured.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add "sync" command (loosely based on the Unix "sync"), which will wait
for any pending operations to complete.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "no" keymap is for a Dvorak keyboard.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Tested-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The output from text-based user interfaces such as the "config"
command is not generally meaningful for logfile-based consoles such as
syslog and vmconsole.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove the name, cmdline, and action parameters from imgdownload() and
imgdownload_string(). These functions now simply download and return
an image.
Add the function imgacquire(), which will interpret a "name or URI
string" parameter and return either an existing image or a newly
downloaded image.
Use imgacquire() to merge similar image-management commands that
currently differ only by whether they take the name of an existing
image or the URI of a new image to download. For example, "chain" and
"imgexec" can now be merged.
Extend imgstat and imgfree commands to take an optional list of
images.
Remove the arbitrary restriction on the length of image names.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
All users of imgdownload() require registration of the image, so make
registration an integral part of imgdownload() itself and simplify the
"action" parameter to be one of image_select(), image_exec() et al.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "sleep" command is generally useful to have. For example:
:dhcp_retry
dhcp && goto dhcp_done
sleep 5
goto dhcp_retry
:dhcp_done
Make the "sleep" command available by default, leaving TIME_CMD
controlling only the (fairly specialist) "time" command.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Expose the multiple-SAN-drive capability of the iPXE core via the iPXE
command line by adding commands to hook and unhook additional drives.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Standardise on using init_editstring() to initialise an embedded
editable string, to match the coding style used by other embedded
objects.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There is no need to explicitly call basename() to construct an image
name in imgfetch_core_exec(), since image_set_uri() will do so
automatically anyway (and will do so without getting confused by URIs
with query strings).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "read" command allows a script to prompt a user to enter a
setting. For example:
echo -n Static IP address:
read net0/ip
Total cost: 17 bytes.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE documentation tends to refer to "settings" rather than "options",
since settings can be more general than DHCP options.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow the user to browse through the settings block hierarchy.
Originally-implemented-by: Glenn Brown <glenn@myri.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Display only settings relevant to the current scope. For example,
"config net0" no longer displays SMBIOS settings, and "config smbios"
displays only SMBIOS settings.
Originally-implemented-by: Glenn Brown <glenn@myri.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Enable the "show" command to display the full, canonicalised name of
the fetched setting. For example:
iPXE> show mac
net0/mac:hex = 52:54:00:12:34:56
iPXE> dhcp && show ip
DHCP (net0 52:54:00:12:34:56)... ok
net0.dhcp/ip:ipv4 = 10.0.0.168
iPXE> show net0/6
net0.dhcp/dns:ipv4 = 10.0.0.6
Inspired-by: Glenn Brown <glenn@myri.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "us" keyboard layout contains a mapping for keycode 86 (which
seems not to correspond to any physical key on many US keyboards) to
the ASCII character '<'. This mapping causes conflicts with the
mapping for keycode 51, which also maps (with shift) to '<'.
Change the keyboard mapping generator to choose the lowest keycode for
each ASCII character as indicating the relevant mapping to use, on the
basis that a lower keycode roughly indicates a "more normal" key. On
a German keyboard, which has keys for both keycode 51 and keycode 86
present, this causes '<' to be remapped to ';', which is a closer
match to typical user expectations.
Reported-by: Sven Dreyer <sven@dreyer-net.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Inspired by LILO's keytab-lilo.pl, genkeymap.pl uses "loadkeys -b" to
obtain a Linux keyboard map, and generates a file keymap_xx.c in
hci/keymap.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Refactor the {load,exec} image operations as {probe,exec}. This makes
the probe mechanism cleaner, eliminates some forward declarations,
avoids holding magic state in image->priv, eliminates the possibility
of screwing up between the "load" and "exec" stages, and makes the
documentation simpler since the concept of "loading" (as distinct from
"executing") no longer needs to be explained.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The online documentation (e.g. http://ipxe.org/cmd/ifopen), though not
yet complete, is far more comprehensive than could be provided within
the iPXE binary. Save around 200 bytes (compressed) by removing the
command descriptions from the interactive help, and instead referring
users directly to the web page describing the relevant command.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For performing installations direct to a SAN target, it can be very
useful to hook a SAN disk and then proceed to perform a filename boot.
For example, the user may wish to hook the (empty) SAN installation
disk and then boot into the OS installer via TFTP. This provides an
alternative mechanism to using "keep-san" and relying on the BIOS to
fall through to boot from the installation media, which is unreliable
on many BIOSes.
When a root-path is specified in addition to a boot filename, attempt
to hook the root-path as a SAN disk before booting from the specified
filename. Since the root-path may be used for non-SAN purposes
(e.g. an NFS root mount point), ignore the root-path if it contains a
URI scheme that we do not support.
Originally-implemented-by: Jarrod Johnson <jarrod.b.johnson@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The && and || operators should be left-associative, since that is how
they are treated in most other languages (including C and Unix
shell). For example, in the command:
dhcp net0 && goto dhcp_ok || echo No DHCP on net0
if the "dhcp net0" fails then the "echo" should be executed.
After an "exit" or a successful "goto", further commands on the same
line should never be executed. For example:
goto somewhere && echo This should never be printed
exit 0 && echo This should never be printed
exit 1 && echo This should never be printed
An "exit" should cause the current shell or script to terminate and
return the specified exit status to its caller. For example:
chain test.ipxe && echo Success || echo Failure
[in test.ipxe]
#!ipxe
exit 0
should echo "Success".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "shell" command allows a script to enter an interactive shell,
which is potentially useful for troubleshooting.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow "set <variable>" to be used to set the variable to an empty
value, if permitted by the setting type. Note that some settings
backends do not differentiate between an empty value and a
non-existent value, so this may or may not be equivalent to "clear
<variable>".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow "autoboot" to accept an optional list of network devices, and
remove the "netboot" command. This saves around 130 bytes.
The "netboot" command has existed for approximately 48 hours, so its
removal should not cause backwards compatibility issues for anyone.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There are several points in the iPXE codebase where
list_for_each_entry() is (ab)used to extract only the first entry from
a list. Add a macro list_first_entry() to make this code easier to
read.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Users tend to gloss over cryptic-looking error messages such as
"Boot failed: Exec format error (Error 0x2e852001)"
In particular, users tend not to report the error number, which is the
single most useful piece of diagnostic information in an iPXE error
message. Try replacing the "Error 0x2e852001" portion with a URL,
giving
"Boot failed: Exec format error (http://ipxe.org/2e852001)"
in the hope that users will, upon seeing something that is
recognisably a URL, try viewing it in a web browser. Such users will
be greeted by a web page containing a more detailed description of the
error (automatically generated from the einfo text), including links
to each line of code that might generate the error, and a section for
additional user-contributed notes. At the time of writing, a user who
visits http://ipxe.org/2e852001 would see a note saying
"This error usually indicates that the SAN disk is empty, and does
not yet contain a bootable operating system."
which may be more useful than "Exec format error (Error 0x2e852001)".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow multiple, space separated values (such as kernel arguments,
passed via DHCP) to be assigned to an identifier using the "set"
command.
Originally-implemented-by: Aaron Brooks <aaron@brooks1.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Support qemu-like arguments for network setup:
--net driver_name[,setting=value]*
and global settings:
--settings setting=value[,setting=value]*
Signed-off-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "dhcp" command now accepts a list of interfaces to try until one
succeeds. For example:
iPXE> dhcp net0 net1 net2
If no interfaces are specified, all interfaces will be tried.
Note that interfaces that fail to DHCP are closed in order to avoid
memory exhaustion. This behavior differs from the previous "dhcp"
command implementation but should not affect any existing scripts
since a "dhcp" command failure would in any case cause the script to
abort.
Originally-implemented-by: Lars Kellogg-Stedman <lars@oddbit.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Continue calling step() while displaying the shell banner. This
potentially allows TCP connections to close gracefully after a failed
boot attempt.
Inspired-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Make Ctrl-D delete a setting, because the Text User Interface (tui)
previously provided no way to delete a setting. Also, update the
on-screen instructions to describe the new feature. Deleting settings
is especially important for settings stored in precious nonvolatile
storage.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Implement jump scrolling with "..." displayed where the settings list
continues off-screen, because there are now too many settings to fit
on screen in the "config ..." text user interface.
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain. Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.
Also update README, LOG and COPYRIGHTS to remove obsolete information.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown