Note that IANA has not yet assigned a DHCPv6 option code for the
syslog server. When a code is assigned, the definition of
DHCPV6_LOG_SERVERS should be updated. Until then, an IPv6 address of
a syslog server can be configured manually using e.g.
set syslog6 3ffe:302:11:2::8309
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Our policy is to prefer IPv6 addreses to IPv4 addresses, but to
request IPv6 addresses only if we have an IPv6 address for the name
server itself.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow for the existence of references to IPv6 setting types without
dragging in the whole IPv6 stack, by placing the definition of
setting_type_ipv6 in core/settings.c and providing weak stub methods
for parse_ipv6_setting() and format_ipv6_setting().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The fetch_setting() family of functions may currently modify the
definition of the specified setting (e.g. to add missing type
information). Clean up this interface by requiring callers to provide
an explicit buffer to contain the completed definition of the fetched
setting, if required.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The ANSI escape sequences to show and hide the cursor take the form
"<ESC>[?25h" and "<ESC>[?25l" respectively. iPXE currently treats the
'?' character as the final byte. Fix by explicitly treating '?' as an
intermediate byte.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
OpenBSD 5.4 seems to generate dynamically linked binaries by default,
which breaks our build process. Fix by forcing the linker to always
create static binaries.
Reported-by: Jiri B <jirib@devio.us>
Tested-by: Jiri B <jirib@devio.us>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There is no requirement for VBE modes to be listed in increasing order
of resolution. With the present logic, this can cause e.g. a 1024x768
mode to be selected if the user asks for 640x480, if the 1024x768 mode
is earlier in the mode list.
Define a scoring system for modes as
score = ( width * height - bpp )
and choose the mode with the lowest score among all acceptable modes.
This should prefer to choose the mode closest to the requested
resolution, with a slight preference for higher colour depths.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The VirtualBox BIOS fails to retrieve mode information (with status
0x0100) for some modes within the mode list. Skip any such modes,
rather than treating this as a fatal error.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The VESA frame buffer console uses the VESA BIOS extensions (VBE) to
enumerate video modes, selects an appropriate mode, and then hands off
to the generic frame buffer code.
The font is extracted from the VGA BIOS, avoiding the need to provide
an external font file.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow the "initialising devices" message to show up on consoles which
require initialisation, by deferring it until after initialise() has
completed.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow for IPv6 routing table entries to be created for an on-link
prefix where a local address has not yet been assigned to the network
device.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Syslinux 6.x places its files into a bios subdirectory, and requires
that a ldlinux.c32 module be included within the ISO image. Add the
relevant search paths for isolinux.bin, and include the file
ldlinux.c32 within the ISO image if it exists.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add support for the stateful and stateless variants of the DHCPv6
protocol. The resulting settings block is registered as
"net<x>.dhcpv6", and DHCPv6 options can be obtained using
e.g. "${net0.dhcpv6/23:ipv6}" to obtain the IPv6 DNS server address.
IPv6 addresses obtained via stateful DHCPv6 are not yet applied to the
network device.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The retrieval of the cached DHCPACK and the creation of network
devices are both currently scheduled as STARTUP_NORMAL. It is
therefore possible that the cached DHCPACK will not be retrieved in
time for cachedhcp_probe() to apply it to the relevant network device.
Fix by retrieving the cached DHCPACK at initialisation time rather
than at startup time.
As an optimisation, an unclaimed cached DHCPACK can be freed
immediately after the last network device has been created, rather
than waiting until shutdown.
Reported-by: Espen Braastad <espen.braastad@redpill-linpro.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Include IPv6 within the generic network device configurator
mechanism. The IPv6 configurator will send a router solicitation and
wait for a router advertisement to be received. (As per RFC4861
section 6.3.7, we do this even if advertisements have been received
prior to sending the router solicitation.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE supports multiple mechanisms for network device configuration:
DHCPv4 for IPv4, FIP for FCoE, and SLAAC for IPv6. At present, DHCPv4
requires an explicit action (e.g. a "dhcp" command), FIP is initiated
implicitly upon opening a network device, and SLAAC takes place
whenever a RA happens to be received.
Add a generic concept of a network device configurator, which provides
a common interface to triggering configuration and to reporting the
result of the configuration process.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 5e1fa5c ("[parseopt] Add parse_timeout()") introduced a
regression causing the shell banner timeout value (calculated in
milliseconds) to be treated as a timer tick count, resulting in a
timeout of approximately two minutes rather than the intended two
seconds.
Reported-by: Christian Hesse <list@eworm.de>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
If a job times out then use the most recent ongoing error status
reported via job_progress() (if available) as the overall return
status.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some background jobs have a meaningful ongoing status code (e.g. the
current link status for a job waiting for a network link to come up).
Allow this to be exposed via the job_progress() method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
If an object interface does not provide an intf_close() method, then
default to calling intf_restart(). This allows static objects to
safely ignore intf_close(), without needing to add code solely to
ensure that the interface gets unplugged.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Most network upper-layer drivers do not implement all three methods
(probe, notify, and remove). Save code by making all methods
optional.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Parsing a timeout value (specified in milliseconds) into an internal
timeout value measured in timer ticks is a common operation. Provide
a parse_timeout() value to carry out this conversion automatically.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When chainloading, always retrieve the cached DHCPACK packet from the
underlying PXE stack, and apply it as the original contents of the
"net<X>.dhcp" settings block. This allows cached DHCP settings to be
used for any chainloaded iPXE binary (not just undionly.kkpxe).
This change eliminates the undocumented "use-cached" setting. Issuing
the "dhcp" command will now always result in a fresh DHCP request.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When transmitting to a link-local or multicast destination address,
use the network device's link-local address as the source address if
no explicit source address has been specified.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The IPv6 option length field represents the length of the option data
field, not the overall length of the option.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add generic pinger mechanism (analogous to the generic downloader
mechanism) which opens a ping socket, transmits ping requests, and
passes information about ping replies to a callback function.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Merge common functionality between IPv4 and IPv6 ICMP echo handling,
and add support for transmitting ICMP echo requests and delivering
ICMP echo replies to a (not yet implemented) ping_rx() function.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Commit 238050d ("[build] Work around bug in gcc >= 4.8") works around
one instance of a bug in recent versions of gcc, in which "ebp" cannot
be specified within an asm clobber list.
Some versions of gcc seem to exhibit the same bug on other points in
the codebase. Fix by changing all instances of "ebp" in a clobber
list to use the push/pop %ebp workaround instead.
Originally-implemented-by: Víctor Román Archidona <contacto@victor-roman.es>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The path MTU is currently hardcoded to 1460 bytes, which fails to
allow space for TCP options. Sending a maximum-sized datagram (which
is viable when using HTTP POST) will therefore fail since the Ethernet
MTU will be exceeded.
Reduce the hardcoded path MTU to produce a maximum datagram of 1280
bytes, which is the size required of data link layers by IPv6. It is
a reasonable assumption that all intermediary data link layers will be
able to convey this packet without fragmentation, even for IPv4.
Note that this reduction has a minimal impact upon download
throughput, since it affects only the transmit data path.
Originally-fixed-by: Suresh Sundriyal <ssundriy@vmware.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Replace the existing partially-implemented IPv6 stack with a fresh
implementation.
This implementation is not yet complete. The IPv6 transmit and
receive datapaths are functional (including fragment reassembly and
parsing of arbitrary extension headers). NDP neighbour solicitations
and advertisements are supported. ICMPv6 echo is supported.
At present, only link-local addresses may be used, and there is no way
to specify an IPv6 address as part of a URI (either directly or via
a DNS lookup).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Split the protocol-independent portions of arp.c into a separate file
neighbour.c, to allow for sharing of functionality between IPv4+ARP
and IPv6+NDP.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
IPv6 link-local socket addresses require some way to specify a local
network device. We cannot simply use a pointer to the network device,
since a struct sockaddr_in6 may be long-lived and has no way to hold a
reference to the network device.
Using a network device index allows a socket address to cleanly refer
to a network device without worrying about whether or not that device
continues to exist.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Give tap devices a meaningful name, and avoid segmentation faults when
attempting to retrieve ${net0/bustype} by assigning a new bus type for
tap devices.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow for configurable provision of built-in settings by placing them
in a linker table rather than an array.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Prevent the card from flagging packets of 1518 bytes length as
overlength.
This fixes the High-MTU loopback test.
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The 3c90x B and C revisions support rounding up the packet length to a
specific boundary. Disable this feature to avoid overlength packets.
This fixes the loopback test.
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
According to the 3c90x datasheet we have to stall the upload (receive)
engine before setting the receive ring address.
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow HTTP POST requests to be generated when the URI includes a
parameter list. For example:
#!ipxe
params
param mac ${net0/mac}
param uuid ${uuid}
param asset ${asset}
chain http://boot.ipxe.org/demo/boot.php##params
Signed-off-by: Michael Brown <mcb30@ipxe.org>
HTTP POST requires the ability to associate a parameter list with a
URI. There is no standardised syntax for this. Use a non-standard
URI syntax to incorporate the specification of a parameter list within
a URI:
URI = [ absoluteURI | relativeURI ]
[ "#" fragment ] [ "##params" [ "=" paramsName ] ]
e.g.
http://boot.ipxe.org/demo/boot.php##paramshttp://boot.ipxe.org/demo/boot.php##params=mylist
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow memory map entries to be read using the syntax
${memmap/<region>.<properties>.<scale>}
where <region> is the index of the memory region, <properties> is a
bitmask where bit 0 represents the start address and bit 1 represents
the length (allowing the end address to be encoded by having both bits
0 and 1 set), and <scale> is the number of bits by which to shift the
result.
This allows for several values of interest to be encoded. For
example:
${memmap/<region>.1.0:hexraw} # 64-bit start address of <region>
${memmap/<region>.2.0:hexraw} # 64-bit length of <region>, in bytes
${memmap/<region>.3.0:hexraw} # 64-bit end address of <region>
${memmap/<region>.2.10:int32} # Length of <region>, in kB
${memmap/<region>.2.20:int32} # Length of <region>, in MB
The numeric encoding is slightly more sophisticated than described
here, allowing a single encoding to cover multiple regions. (See the
source code for details.) The primary use case for this feature is to
provide the total system memory size (in MB) via the "memsize"
predefined setting.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow numeric_setting_value() to handle e.g. the byte sequence
00:00:00:00:12:34:56:78
by returning -ERANGE only if the value actually overflows the return
type.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow CPUID values to be read using the syntax
${cpuid/<register>.<function>}
For example, ${cpuid/2.0x80000001} will give the value of %ecx after
calling CPUID with %eax=0x80000001. Values for <register> are encoded
as %eax=0, %ebx=1, %ecx=2, %edx=3.
The numeric encoding is more sophisticated than described above,
allowing for settings such as the CPU model (obtained by calling CPUID
with %eax=0x80000002-0x80000004 inclusive and concatenating the values
returned in %eax:%ebx:%ecx:%edx). See the source code for details.
The "cpuvendor" and "cpumodel" settings provide easy access to these
more complex CPUID settings.
This functionality is intended to complement the "cpuid" command,
which allows for testing individual CPUID feature bits.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
This makes it possible to leave UDP debugging enabled in order to see
interesting UDP events, without flooding the console with at least one
message per packet.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The "inc" command allows the numeric value of a setting to be
incremented, allowing for the construction of simple loops within an
iPXE script.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow commands to be placed on the same line as a label. This allows
for improved legibility of loop constructions by incorporating the
loop check condition into the same line as the loop label. For
example, to iterate over network devices using the forthcoming "inc"
command:
set idx:int16 0
:loop isset ${net${idx}/mac} || goto loop_done
echo net${idx} is a ${net${idx}/chip} with MAC ${net${idx}/mac}
inc idx && goto loop
:loop_done
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Initial whitespace is already accepted on lines containing commands,
since it gets ignored by the system() call. Minimise surprise and
allow for neater indentation of scripts by also allowing whitespace on
lines containing labels.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A deliberate side effect of this commit is that the "read" command
will now preserve the type of the setting, if the setting name
contains no type information. For example:
iPXE> set foo:ipv4 192.168.0.1
iPXE> read foo
192.168.0.100
iPXE> show foo
foo:ipv4 = 192.168.0.100
rather than the arguably unexpected behaviour of resetting the type to
"string".
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use parse_setting_name() and fetchf_setting_copy() in
expand_settings(), to eliminate the call to fetchf_named_setting().
This change also eliminates the potentially large stack-allocated
buffer in expand_settings().
Signed-off-by: Michael Brown <mcb30@ipxe.org>
fetch_settings_copy() currently returns success and a NULL data
pointer to indicate a non-existent setting. This is intended to allow
the caller to differentiate between a non-existent setting and an
error in allocating memory for the copy of the setting.
The underlying settings blocks' fetch() methods provide no way to
perform an existence check separate from an attempt to fetch the
setting. A "non-existent setting" therefore means simply a setting
for which an error was encountered when attempting to fetch from every
settings block within the subtree.
Since any underlying error within a settings block (e.g. a GuestRPC
failure when attempting to retrieve a VMware GuestInfo setting) will
produce the effect of a "non-existent setting", it seems somewhat
meaningless to give special treatment to memory allocation errors
within fetch_setting_copy().
Remove the special treatment and simplify the semantics of
fetch_setting_copy() by directly passing through any underlying error
(including non-existence) encountered while fetching the setting.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
There are currently two conflicting usages of the term "named setting"
within iPXE: one refers to predefined settings (such as show up in the
"config" UI), the other refers to settings identified by a name (such
as "net0.dhcp/ip").
Split these usages into the term "predefined setting" and "named
setting" to avoid ambiguity.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Our use of --gc-sections causes the linker to discard the symbols
defined by FILE_LICENCE(), meaning that the resulting licence
determination is incomplete.
We must use the KEEP() directive in the linker script to force the
linker to not discard the licence symbols. Using KEEP(*(COMMON))
would be undesirable, since there are some symbols in COMMON which we
may wish to discard.
Fix by placing symbols defined by PROVIDE_SYMBOL() (which is used by
FILE_LICENCE()) into a special ".provided" section, which we then mark
with KEEP(). All such symbols are zero-length, so there is no cost in
terms of the final binary size.
Since the symbols are no longer in COMMON, the linker will reject
symbols with the same name coming from multiple objects. We therefore
append the object name to the licence symbol, to ensure that it is
unique.
Reported-by: Marin Hannache <git@mareo.fr>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The getopt API defines optind as a global variable. When used by the
"autoboot" command, the payload function passed to ifcommon_exec() may
result in a new iPXE script being executed; the commands therein would
then overwrite the value of optind. On returning, ifcommon_exec()
would continue processing the list of interfaces from an undefined
point.
Fix by using a local variable to hold the index within the list of
interfaces.
Reported-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some hardware (observed with an onboard RTL8168) will erroneously
report a buffer overflow error if the received packet exactly fills
the receive buffer.
Fix by adding an extra four bytes of padding to each receive buffer.
Debugged-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add support for page up, page down, home and end keys, matching the
navigation logic used in the menu user interface.
Originally-implemented-by: Marin Hannache <git@mareo.fr>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Signed-off-by: Adrian Jamróz <adrian.jamroz@gmail.com>
Modified-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Thomas Miletich <thomas.miletich@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow long script lines to be broken up using backslash continuation.
For example:
choose --default linux --timeout 3000 os \
&& goto boot_${os} || goto cancelled
Requested-by: Robin Smidsrød <robin@smidsrod.no>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
base16_encode() will fail to generate a terminating NUL if the length
of the raw data is zero, since the loop calling sprintf() will never
execute.
Fix by explicitly terminating the result with a NUL.
Reported-by: Marin Hannache <git@mareo.fr>
Debugged-by: Marin Hannache <git@mareo.fr>
Tested-by: Marin Hannache <git@mareo.fr>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Michael Brown