The fetch_setting() family of functions may currently modify the
definition of the specified setting (e.g. to add missing type
information). Clean up this interface by requiring callers to provide
an explicit buffer to contain the completed definition of the fetched
setting, if required.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add support for the stateful and stateless variants of the DHCPv6
protocol. The resulting settings block is registered as
"net<x>.dhcpv6", and DHCPv6 options can be obtained using
e.g. "${net0.dhcpv6/23:ipv6}" to obtain the IPv6 DNS server address.
IPv6 addresses obtained via stateful DHCPv6 are not yet applied to the
network device.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
When chainloading, always retrieve the cached DHCPACK packet from the
underlying PXE stack, and apply it as the original contents of the
"net<X>.dhcp" settings block. This allows cached DHCP settings to be
used for any chainloaded iPXE binary (not just undionly.kkpxe).
This change eliminates the undocumented "use-cached" setting. Issuing
the "dhcp" command will now always result in a fresh DHCP request.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The PXE spec does not specify a byte ordering for UUIDs, but RFC4578
suggests that it follows the EFI spec, in which the first three fields
are little-endian.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The PXE TFTP API allows the caller to request a particular TFTP block
size. Since mid-2008, iPXE has appended a "?blksize=xxx" parameter to
the TFTP URI constructed internally; nothing has ever parsed this
parameter. Nobody seems to have cared that this parameter has been
ignored for almost five years.
Fix by using xfer_window(), which provides a fairly natural way to
convey the block size information from the PXE TFTP API to the TFTP
protocol layer.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Almost all clients of the raw-packet interfaces (UNDI and SNP) can
handle only Ethernet link layers. Expose an Ethernet-compatible link
layer to local clients, while remaining compatible with IPoIB on the
wire. This requires manipulation of ARP (but not DHCP) packets within
the IPoIB driver.
This is ugly, but it's the only viable way to allow IPoIB devices to
be driven via the raw-packet interfaces.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
FCoE requires the use of multiple local unicast link-layer addresses.
To avoid the complexity of managing multiple addresses, iPXE operates
in promiscuous mode. As a consequence, any unicast packets with
non-matching IPv4 addresses are rejected at the IPv4 layer (rather
than at the link layer).
This can cause problems when issuing a second DHCP request: if the
address chosen by the DHCP server does not match the existing address,
then the DHCP response will itself be rejected.
Fix by requesting a broadcast response from the DHCP server if the
network interface already has any IPv4 addresses.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Allow TFTP to be configured out by moving the next-server setting
definition (which is used by autoboot.c) from tftp.c to settings.c.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Use a private ANSI escape sequence to convey the priority of an
internal syslog() message through to the syslog server.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
An ANSI escape sequence context cannot be shared between multiple
users. Make the ANSI escape sequence context part of the line console
definition and provide individual contexts for each user.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The output from text-based user interfaces such as the "config"
command is not generally meaningful for logfile-based consoles such as
syslog and vmconsole.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Add the concept of a "console usage", such as "standard output" or
"debug messages". Allow usages to be associated with each console
independently. For example, to send debugging output via the serial
port, while preventing it from appearing on the local console:
#define CONSOLE_SERIAL CONSOLE_USAGE_ALL
#define CONSOLE_PCBIOS ( CONSOLE_USAGE_ALL & ~CONSOLE_USAGE_DEBUG )
If no usages are explicitly specified, then a default set of usages
will be applied. For example:
#define CONSOLE_SERIAL
will have the same affect as
#define CONSOLE_SERIAL CONSOLE_USAGE_ALL
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Abstract out the generic line-handling portions of the syslog
putchar() routine, to allow use by other console types.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Explicitly disable the syslog console when no syslog server is
defined, rather than (ab)using the socket family address as an
equivalent console-enabled flag.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The PXE specification requires us to request DHCP options 128 to 135
inclusive, although these have no defined purpose.
Suggested-by: Ralf Buettner <rab@bootix.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE currently uses the last four bytes of the MAC address as the DHCP
transaction identifier. Reduce the probability of collisions by
generating a random transaction identifier.
Originally-implemented-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Set the current working URI to NULL rather than to "tftp://0.0.0.0/".
Reported-by: Piotr Jaroszyński <p.jaroszynski@gmail.com>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Improve the appearance of the "config" user interface by ensuring that
settings appear in some kind of logical order.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
The max_len field is never used, and the len field is used only by
dhcp_tx(). Remove these two fields, and perform the necessary trivial
calculation in dhcp_tx() instead.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
For IPoIB, we currently use the hardware address (i.e. the eight-byte
GUID) as the DHCP chaddr. This works, but some PXE servers (notably
Altiris RDP) refuse to respond if the chaddr field is anything other
than six bytes in length.
We already have the notion of an Ethernet-compatible link-layer
address, which is used in the iBFT (the design of which similarly
fails to account for non-Ethernet link layers). Use this as the first
preferred alternative to the actual link-layer address when
constructing the DHCP chaddr field.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Pass the settings block name as a parameter to register_settings(),
rather than defining it with settings_init() (and then possibly
changing it by directly manipulating settings->name).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
(Ab)use the "secs" field in transmitted DHCP packets to convey
metadata about the DHCP session state. In particular:
bit 0 represents the receipt of a ProxyDHCPOFFER
bit 1 represents the receipt of a DHCPOFFER
bits 2+ represent the transmitted packet sequence number
This allows some relevant information about the internal state of the
DHCP session to be read out from a packet trace from a non-debug build
of iPXE. It also potentially allows replies to be correlated to their
requests (for servers that copy the "secs" field from request to
reply).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Some ProxyDHCP implementations seem to violate the PXE specification
by expecting the client to retain options from the ProxyDHCPOFFER
rather than issuing a separate ProxyDHCPREQUEST.
Work around such broken clients by retaining the ProxyDHCPOFFER
packet, and proceeding to a ProxyDHCPREQUEST only if the
ProxyDHCPOFFER does not already contain PXE options.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
A recent patch series breaks compatibility with various common DHCP
implementations.
Revert "[dhcp] Don't consider invalid offers to be duplicates"
This reverts commit 905ea56753.
Revert "[dhcp] Honor PXEBS_SKIP option in discovery control"
This reverts commit 620b98ee4b.
Revert "[dhcp] Keep multiple DHCP offers received, and use them intelligently"
This reverts commit 5efc2fcb60.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Guarantee that a retry timer cannot go out of scope while the timer is
running, and provide a guarantee to the expiry callback that the timer
will remain in scope during the entire callback (similar to the
guarantee provided to interface methods).
Signed-off-by: Michael Brown <mcb30@ipxe.org>
iPXE has never supported SEEK_END; the usage of "whence" offers only
the options of SEEK_SET and SEEK_CUR and so is effectively a boolean
flag. Further flags will be required to support additional metadata
required by the Fibre Channel network model, so repurpose the "whence"
field as a generic "flags" field.
xfer_seek() has always been used with SEEK_SET, so remove the "whence"
field altogether from its argument list.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Even with the noinline specifier added by commit 1a260f8, gcc may skip
calls to non-inlinable functions that it knows have no side
effects. This caused the get_cached_dhcpack() call in start_dhcp(),
the weak stub of which has no code in its body, to be removed,
preventing cached DHCP from working.
Fix by adding a __keepme macro to compiler.h expanding to asm(""), as
recommended by gcc's info page, and using it in the weak stub for
get_cached_dhcpack().
Reported-by: Aaron Brooks <aaron@brooks1.net>
Tested-by: Aaron Brooks <aaron@brooks1.net>
Signed-off-by: Joshua Oreman <oremanj@rwcr.net>
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove data-xfer as an interface type, and replace data-xfer
interfaces with generic interfaces supporting the data-xfer methods.
Filter interfaces (as used by the TLS layer) are handled using the
generic pass-through interface capability. A side-effect of this is
that deliver_raw() no longer exists as a data-xfer method. (In
practice this doesn't lose any efficiency, since there are no
instances within the current codebase where xfer_deliver_raw() is used
to pass data to an interface supporting the deliver_raw() method.)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove name-resolution as an interface type, and replace
name-resolution interfaces with generic interfaces supporting the
resolv_done() method.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Remove job-control as an interface type, and replace job-control
interfaces with generic interfaces supporting the close() method.
(Both done() and kill() are absorbed into the function of close();
kill() is merely close(-ECANCELED).)
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Standardise on using timer_init() to initialise an embedded retry
timer, to match the coding style used by other embedded objects.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
Standardise on using ref_init() to initialise an embedded reference
count, to match the coding style used by other embedded objects.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
