[i386] Simplify linker script and standardise linker-defined symbol names

Reduce the number of sections within the linker script to match the
number of practical sections within the output file.

Define _section, _msection, _esection, _section_filesz, _section_memsz,
and _section_lma for each section, replacing the mixture of symbols that
previously existed.

In particular, replace _text and _end with _textdata and _etextdata, to
make it explicit within code that uses these symbols that the .text and
.data sections are always treated as a single contiguous block.

src/arch/i386/core/relocate.c

@@ -18,8 +18,8 @@ extern char _max_align[];
 #define max_align ( ( unsigned int ) _max_align )
 
 /* Linker symbols */
-extern char _text[];
+extern char _textdata[];
-extern char _end[];
+extern char _etextdata[];
 
 /* within 1MB of 4GB is too close. 
  * MAX_ADDR is the maximum address we can easily do DMA to.
@@ -47,8 +47,8 @@ __cdecl void relocate ( struct i386_all_regs *ix86 ) {
 
 	/* Get memory map and current location */
 	get_memmap ( &memmap );
-	start = virt_to_phys ( _text );
+	start = virt_to_phys ( _textdata );
-	end = virt_to_phys ( _end );
+	end = virt_to_phys ( _etextdata );
 	size = ( end - start );
 	padded_size = ( size + max_align - 1 );
 

src/arch/i386/firmware/pcbios/e820mangler.S

@@ -66,7 +66,7 @@
 	.align 16
 	.globl hidemem_base
 	.globl hidemem_umalloc
-	.globl hidemem_text
+	.globl hidemem_textdata
 memory_windows:
 base_memory_window:	.long 0x00000000, 0x00000000 /* Start of memory */
 
@@ -76,7 +76,7 @@ ext_memory_window:	.long 0x000a0000, 0x00000000 /* 640kB mark */
 hidemem_umalloc:	.long 0xffffffff, 0xffffffff /* Changes at runtime */
 			.long 0xffffffff, 0xffffffff /* Changes at runtime */
 
-hidemem_text:		.long 0xffffffff, 0xffffffff /* Changes at runtime */
+hidemem_textdata:	.long 0xffffffff, 0xffffffff /* Changes at runtime */
 			.long 0xffffffff, 0xffffffff /* Changes at runtime */
 
 			.long 0xffffffff, 0xffffffff /* End of memory */

src/arch/i386/firmware/pcbios/hidemem.c

@@ -55,8 +55,8 @@ extern struct hidden_region __data16 ( hidemem_umalloc );
 #define hidemem_umalloc __use_data16 ( hidemem_umalloc )
 
 /** Hidden text memory */
-extern struct hidden_region __data16 ( hidemem_text );
+extern struct hidden_region __data16 ( hidemem_textdata );
-#define hidemem_text __use_data16 ( hidemem_text )
+#define hidemem_textdata __use_data16 ( hidemem_textdata )
 
 /** Assembly routine in e820mangler.S */
 extern void int15();
@@ -66,12 +66,12 @@ extern struct segoff __text16 ( int15_vector );
 #define int15_vector __use_text16 ( int15_vector )
 
 /* The linker defines these symbols for us */
-extern char _text[];
+extern char _textdata[];
-extern char _end[];
+extern char _etextdata[];
-extern char _text16_size[];
+extern char _text16_memsz[];
-#define _text16_size ( ( unsigned int ) _text16_size )
+#define _text16_memsz ( ( unsigned int ) _text16_memsz )
-extern char _data16_size[];
+extern char _data16_memsz[];
-#define _data16_size ( ( unsigned int ) _data16_size )
+#define _data16_memsz ( ( unsigned int ) _data16_memsz )
 
 /**
  * Hide region of memory from system memory map
@@ -110,7 +110,7 @@ void hide_basemem ( void ) {
  *
  */
 void hide_umalloc ( physaddr_t start, physaddr_t end ) {
-	assert ( end <= virt_to_phys ( _text ) );
+	assert ( end <= virt_to_phys ( _textdata ) );
 	hide_region ( &hidemem_umalloc, start, end );
 }
 
@@ -118,9 +118,9 @@ void hide_umalloc ( physaddr_t start, physaddr_t end ) {
  * Hide .text and .data
  *
  */
-void hide_text ( void ) {
+void hide_textdata ( void ) {
-	hide_region ( &hidemem_text, virt_to_phys ( _text ),
+	hide_region ( &hidemem_textdata, virt_to_phys ( _textdata ),
-		      virt_to_phys ( _end ) );
+		      virt_to_phys ( _etextdata ) );
 }
 
 /**
@@ -148,8 +148,8 @@ static void hide_etherboot ( void ) {
 
 	/* Initialise the hidden regions */
 	hide_basemem();
-	hide_umalloc ( virt_to_phys ( _text ), virt_to_phys ( _text ) );
+	hide_umalloc ( virt_to_phys ( _textdata ), virt_to_phys ( _textdata ) );
-	hide_text();
+	hide_textdata();
 
 	/* Some really moronic BIOSes bring up the PXE stack via the
 	 * UNDI loader entry point and then don't bother to unload it
@@ -161,8 +161,8 @@ static void hide_etherboot ( void ) {
 	 * We use a heuristic to guess whether or not we are being
 	 * loaded sensibly.
 	 */
-	rm_cs_top = ( ( ( rm_cs << 4 ) + _text16_size + 1024 - 1 ) >> 10 );
+	rm_cs_top = ( ( ( rm_cs << 4 ) + _text16_memsz + 1024 - 1 ) >> 10 );
-	rm_ds_top = ( ( ( rm_ds << 4 ) + _data16_size + 1024 - 1 ) >> 10 );
+	rm_ds_top = ( ( ( rm_ds << 4 ) + _data16_memsz + 1024 - 1 ) >> 10 );
 	fbms = get_fbms();
 	if ( ( rm_cs_top < fbms ) && ( rm_ds_top < fbms ) ) {
 		DBG ( "Detected potentially unsafe UNDI load at CS=%04x "

src/arch/i386/interface/pxe/pxe_entry.S

@@ -44,10 +44,10 @@ ppxe:
 	.byte SegDescCnt		/* SegDescCnt */
 	.word 0				/* FirstSelector */
 pxe_segments:
-	.word 0, 0, 0, _data16_size	/* Stack */
+	.word 0, 0, 0, _data16_memsz	/* Stack */
-	.word 0, 0, 0, _data16_size	/* UNDIData */
+	.word 0, 0, 0, _data16_memsz	/* UNDIData */
-	.word 0, 0, 0, _text16_size	/* UNDICode */
+	.word 0, 0, 0, _text16_memsz	/* UNDICode */
-	.word 0, 0, 0, _text16_size	/* UNDICodeWrite */
+	.word 0, 0, 0, _text16_memsz	/* UNDICodeWrite */
 	.word 0, 0, 0, 0		/* BC_Data */
 	.word 0, 0, 0, 0		/* BC_Code */
 	.word 0, 0, 0, 0		/* BC_CodeWrite */
@@ -76,15 +76,15 @@ pxenv:
 	.long 0				/* PMEntry */
 	.word 0				/* PMSelector */
 	.word 0				/* StackSeg */
-	.word _data16_size		/* StackSize */
+	.word _data16_memsz		/* StackSize */
 	.word 0				/* BC_CodeSeg */
 	.word 0				/* BC_CodeSize */
 	.word 0				/* BC_DataSeg */
 	.word 0				/* BC_DataSize */
 	.word 0				/* UNDIDataSeg */
-	.word _data16_size		/* UNDIDataSize */
+	.word _data16_memsz		/* UNDIDataSize */
 	.word 0				/* UNDICodeSeg */
-	.word _text16_size		/* UNDICodeSize */
+	.word _text16_memsz		/* UNDICodeSize */
 	.word ppxe, 0			/* PXEPtr */
 	.equ	pxenv_length, . - pxenv
 	.size	pxenv, . - pxenv

src/arch/i386/prefix/dskprefix.S

@@ -144,7 +144,7 @@ got_sectors:
 	/* Jump to loaded copy */
 	ljmp	$SYSSEG, $start_runtime
 
-endseg:	.word SYSSEG + _load_size_pgh
+endseg:	.word SYSSEG + _filesz_pgh
 	.section ".zinfo.fixup", "a"	/* Compressor fixup information */
 	.ascii	"SUBW"
 	.long	endseg

src/arch/i386/prefix/hdprefix.S

@@ -63,7 +63,7 @@ max_sector:
 max_head:
 	.byte	0
 load_length:
-	.long	_load_size_sect
+	.long	_filesz_sect
 	
 	.section ".zinfo.fixup", "a"	/* Compressor fixup information */
 	.ascii	"SUBL"

src/arch/i386/prefix/libprefix.S

@@ -511,11 +511,11 @@ alloc_basemem:
 	shlw	$6, %ax
 
 	/* .data16 segment address */
-	subw	$_data16_size_pgh, %ax
+	subw	$_data16_memsz_pgh, %ax
 	pushw	%ax
 
 	/* .text16 segment address */
-	subw	$_text16_size_pgh, %ax
+	subw	$_text16_memsz_pgh, %ax
 	pushw	%ax
 
 	/* Update FBMS */
@@ -594,19 +594,19 @@ install_prealloc:
 	jnz	1f
 	movw	%cs, %si
 	shll	$4, %esi
-1:	addl	$_payload_offset, %esi
+1:	addl	$_payload_lma, %esi
 
 	/* Install .text16 and .data16 */
 	pushl	%edi
 	movzwl	%ax, %edi
 	shll	$4, %edi
-	movl	$_text16_size, %ecx
+	movl	$_text16_memsz, %ecx
 	movl	%ecx, %edx
 	call	install_block		/* .text16 */
 	movzwl	%bx, %edi
 	shll	$4, %edi
-	movl	$_data16_progbits_size, %ecx
+	movl	$_data16_filesz, %ecx
-	movl	$_data16_size, %edx
+	movl	$_data16_memsz, %edx
 	call	install_block		/* .data16 */
 	popl	%edi
 
@@ -622,8 +622,8 @@ install_prealloc:
 	 * prior to reading the E820 memory map and relocating
 	 * properly.
 	 */
-	movl	$_textdata_progbits_size, %ecx
+	movl	$_textdata_filesz, %ecx
-	movl	$_textdata_size, %edx
+	movl	$_textdata_memsz, %edx
 	call	install_block
 
 	/* Initialise librm at current location */
@@ -681,25 +681,25 @@ prot_call_vector:
 #if COMPRESS
 	.section ".zinfo", "a"
 	.ascii	"COPY"
-	.long	_prefix_load_offset
+	.long	_prefix_lma
-	.long	_prefix_progbits_size
+	.long	_prefix_filesz
 	.long	_max_align
 	.ascii	"PACK"
-	.long	_text16_load_offset
+	.long	_text16_lma
-	.long	_text16_progbits_size
+	.long	_text16_filesz
 	.long	_max_align
 	.ascii	"PACK"
-	.long	_data16_load_offset
+	.long	_data16_lma
-	.long	_data16_progbits_size
+	.long	_data16_filesz
 	.long	_max_align
 	.ascii	"PACK"
-	.long	_textdata_load_offset
+	.long	_textdata_lma
-	.long	_textdata_progbits_size
+	.long	_textdata_filesz
 	.long	_max_align
 #else /* COMPRESS */
 	.section ".zinfo", "a"
 	.ascii	"COPY"
-	.long	_prefix_load_offset
+	.long	_prefix_lma
-	.long	_load_size
+	.long	_filesz
 	.long	_max_align
 #endif /* COMPRESS */

src/arch/i386/prefix/lkrnprefix.S

@@ -92,7 +92,7 @@ setup_sects:
 root_flags: 
 	.word	0
 syssize: 
-	.long	_load_size_pgh - PREFIXPGH
+	.long	_filesz_pgh - PREFIXPGH
 
 	.section ".zinfo.fixup", "a"	/* Compressor fixup information */
 	.ascii	"SUBL"

src/arch/i386/prefix/nbiprefix.S

@@ -32,8 +32,8 @@ segment_header:
 	.byte	0
 	.byte	0x04		/* Last segment */
 	.long	0x00007e00
-imglen:	.long	_load_size - 512
+imglen:	.long	_filesz - 512
-memlen:	.long	_load_size - 512
+memlen:	.long	_filesz - 512
 	.size	segment_header, . - segment_header
 
 	.section ".zinfo.fixup", "a"	/* Compressor fixup information */

src/arch/i386/prefix/romprefix.S

@@ -30,7 +30,7 @@
 	.org	0x00
 romheader:
 	.word	0xAA55			/* BIOS extension signature */
-romheader_size:	.byte _load_size_sect	/* Size in 512-byte blocks */
+romheader_size:	.byte _filesz_sect	/* Size in 512-byte blocks */
 	jmp	init			/* Initialisation vector */
 checksum:
 	.byte	0
@@ -58,12 +58,12 @@ pciheader:
 	.byte	0x03			/* PCI data structure revision */
 	.byte	0x02, 0x00, 0x00	/* Class code */
 pciheader_image_length:
-	.word	_load_size_sect		/* Image length */
+	.word	_filesz_sect		/* Image length */
 	.word	0x0001			/* Revision level */
 	.byte	0x00			/* Code type */
 	.byte	0x80			/* Last image indicator */
 pciheader_runtime_length:
-	.word	_load_size_sect		/* Maximum run-time image length */
+	.word	_filesz_sect		/* Maximum run-time image length */
 	.word	0x0000			/* Configuration utility code header */
 	.word	0x0000			/* DMTF CLP entry point */
 	.equ pciheader_len, . - pciheader
@@ -130,9 +130,9 @@ undiheader:
 	.byte	0			/* Structure revision */
 	.byte	0,1,2			/* PXE version: 2.1.0 */
 	.word	undiloader		/* Offset to loader routine */
-	.word	_data16_size		/* Stack segment size */
+	.word	_data16_memsz		/* Stack segment size */
-	.word	_data16_size		/* Data segment size */
+	.word	_data16_memsz		/* Data segment size */
-	.word	_text16_size		/* Code segment size */
+	.word	_text16_memsz		/* Code segment size */
 	.ascii	"PCIR"			/* Bus type */
 	.equ undiheader_len, . - undiheader
 	.size undiheader, . - undiheader
@@ -294,7 +294,7 @@ pmm_scan:
 	/* Shrink ROM and update checksum */
 	xorw	%bx, %bx
 	xorw	%si, %si
-	movw	$_prefix_size_sect, %cx
+	movw	$_prefix_memsz_sect, %cx
 	movb	%cl, romheader_size
 	shlw	$9, %cx
 1:	lodsb

src/arch/i386/scripts/i386.lds

@@ -5,15 +5,9 @@
  *
  */
 
-OUTPUT_FORMAT ( "elf32-i386", "elf32-i386", "elf32-i386" )
-OUTPUT_ARCH ( i386 )
-ENTRY ( _entry )
-
 SECTIONS {
 
-    /* All sections in the resulting file have consecutive load
+    /* Each section starts at a virtual address of zero.
-     * addresses, but may have individual link addresses depending on
-     * the memory model being used.
      *
      * We guarantee alignment of virtual addresses to any alignment
      * specified by the constituent object files (e.g. via
@@ -30,163 +24,123 @@ SECTIONS {
      *
      */
 
-    /*
-     * Weak symbols that need zero values if not otherwise defined
-     */
-
-    . = 0;
-    .weak : AT ( 0 ) {
-	*(.weak)
-    }
-    _assert = ASSERT ( ( . == 0 ), ".weak is non-zero length" );
-
     /*
      * The prefix
+     *
      */
 
-    _prefix_link_addr = 0;
+    .prefix 0x0 : AT ( _prefix_lma ) {
-    . = _prefix_link_addr;
+	_prefix = .;
-    _prefix = .;
-
-    .prefix : AT ( _prefix_load_offset + __prefix ) {
-	__prefix = .;
-	_entry = .;
 	*(.prefix)
 	*(.prefix.*)
-	_eprefix_progbits = .;
+	_mprefix = .;
+    } .prefix_bss (NOLOAD) : {
+	_eprefix = .;
     }
-    
+    _prefix_filesz	= ABSOLUTE ( _mprefix - _prefix );
-    _eprefix = .;
+    _prefix_memsz	= ABSOLUTE ( _eprefix - _prefix );
 
     /*
-     * The 16-bit sections, if present
+     * The 16-bit (real-mode) code section
+     *
      */
 
-    _text16_link_addr = 0;
+    .text16 0x0 : AT ( _text16_lma ) {
-    . = _text16_link_addr;
+	_text16 = .;
-    _text16 = .;
-
-    /* We need to allow code at the NULL address in .text16 */
-
-    .text16 : AT ( _text16_load_offset + __text16 ) {
-	__text16 = .;
 	*(.text16.null)
-	. += 1;			/* Prevent NULL being valid */
+	. += 1;				/* Prevent NULL being valid */
 	*(.text16)
 	*(.text16.*)
-	_etext16_progbits = .;
+	_mtext16 = .;
-    } = 0x9090
+    } .text16_bss (NOLOAD) : {
+	_etext16 = .;
+    }
+    _text16_filesz	= ABSOLUTE ( _mtext16 - _text16 );
+    _text16_memsz	= ABSOLUTE ( _etext16 - _text16 );
 
-    _etext16 = .;
+    /*
+     * The 16-bit (real-mode) data section
+     *
+     */
 
-    _data16_link_addr = 0;
+    .data16 0x0 : AT ( _data16_lma ) {
-    . = _data16_link_addr;
+	_data16 = .;
-    _data16 = .;
+	. += 1;				/* Prevent NULL being valid */
-
-    . += 1;			/* Prevent NULL being valid */
-
-    .rodata16 : AT ( _data16_load_offset + __rodata16 ) {
-	__rodata16 = .;
 	*(.rodata16)
 	*(.rodata16.*)
-    }
-    .data16 : AT ( _data16_load_offset + __data16 ) {
-	__data16 = .;
 	*(.data16)
 	*(.data16.*)
-	_edata16_progbits = .;
+	_mdata16 = .;
-    }
+    } .data16_bss (NOLOAD) : {
-    .bss16 : AT ( _data16_load_offset + __bss16 ) {
-	__bss16 = .;
-	_bss16 = .;
 	*(.bss16)
 	*(.bss16.*)
-	_ebss16 = .;
-    }
-    .stack16 : AT ( _data16_load_offset + __stack16 ) {
-	__stack16 = .;
 	*(.stack16)
 	*(.stack16.*)
+	_edata16 = .;
     }
-
+    _data16_filesz	= ABSOLUTE ( _mdata16 - _data16 );
-    _edata16 = .;
+    _data16_memsz	= ABSOLUTE ( _edata16 - _data16 );
 
     /*
      * The 32-bit sections
+     *
      */
 
-    _textdata_link_addr = 0;
+    .textdata 0x0 : AT ( _textdata_lma ) {
-    . = _textdata_link_addr;
+	_textdata = .;
-    _textdata = .;
-
-    _text = .;
-
-    . += 1;			/* Prevent NULL being valid */
-
-    .text : AT ( _textdata_load_offset + __text ) {
-	__text = .;
 	*(.text.null_trap)
+	. += 1;				/* Prevent NULL being valid */
 	*(.text)
 	*(.text.*)
-    } = 0x9090
-
-    _etext = .;
-
-    _data = .;
-
-    .rodata : AT ( _textdata_load_offset + __rodata ) {
-	__rodata = .;
 	*(.rodata)
 	*(.rodata.*)
-    }
-    .data : AT ( _textdata_load_offset + __data ) {
-	__data = .;
 	*(.data)
 	*(.data.*)
 	*(SORT(.tbl.*))		/* Various tables.  See include/tables.h */
-	_etextdata_progbits = .;
+	_mtextdata = .;
-    }
+    } .textdata_bss (NOLOAD) : {
-    .bss : AT ( _textdata_load_offset + __bss ) {
-	__bss = .;
-	_bss = .;
 	*(.bss)
 	*(.bss.*)
 	*(COMMON)
-	_ebss = .;
-    }
-    .stack : AT ( _textdata_load_offset + __stack ) {
-	__stack = .;
 	*(.stack)
 	*(.stack.*)
+	_etextdata = .;
     }
-
+    _textdata_filesz	= ABSOLUTE ( _mtextdata - _textdata );
-    _edata = .;
+    _textdata_memsz	= ABSOLUTE ( _etextdata - _textdata );
-
-    _etextdata = .;
-
-    _end = .;
 
     /*
      * Compressor information block
+     *
      */
 
-    _zinfo_link_addr = 0;
+    .zinfo 0x0 : AT ( _zinfo_lma ) {
-    . = _zinfo_link_addr;
+	_zinfo = .;
-    _zinfo = .;
-
-    .zinfo : AT ( _zinfo_load_offset + __zinfo ) {
-	__zinfo = .;
-	_entry = .;
 	*(.zinfo)
 	*(.zinfo.*)
-	_ezinfo_progbits = .;
+	_mzinfo = .;
+    } .zinfo_bss (NOLOAD) : {
+	_ezinfo = .;
     }
-    
+    _zinfo_filesz	= ABSOLUTE ( _mzinfo - _zinfo );
-    _ezinfo = .;
+    _zinfo_memsz	= ABSOLUTE ( _ezinfo - _zinfo );
+
+    /*
+     * Weak symbols that need zero values if not otherwise defined
+     *
+     */
+
+    .weak 0x0 : {
+	_weak = .;
+	*(.weak)
+	_eweak = .;
+    }
+    _assert = ASSERT ( ( _weak == _eweak ), ".weak is non-zero length" );
 
     /*
      * Dispose of the comment and note sections to make the link map
      * easier to read
+     *
      */
 
     /DISCARD/ : {
@@ -195,90 +149,53 @@ SECTIONS {
     }
 
     /*
-     * Load address calculations.  The slightly obscure nature of the
+     * Load address calculations.  In older versions of ld, ALIGN()
-     * calculations is because ALIGN(x) can only operate on the
+     * can operate only on the location counter, so we use that.
-     * location counter.
+     *
      */
 
-    _max_align		    = 16;
+    PROVIDE ( _max_align = 16 );
-    _load_addr		    = 0;
+    .			= 0;
 
-    .			    = _load_addr;
+    _prefix_lma		= .;
+    .			+= _prefix_filesz;
+    .			= ALIGN ( _max_align );
 
-    .			   -= _prefix_link_addr;
+    _payload_lma	= .;
-    _prefix_load_offset	    = ALIGN ( _max_align );
-    _prefix_load_addr	    = _prefix_link_addr + _prefix_load_offset;
-    _prefix_size	    = _eprefix - _prefix;
-    _prefix_progbits_size   = _eprefix_progbits - _prefix;
-    .			    = _prefix_load_addr + _prefix_progbits_size;
 
-    .			   -= _text16_link_addr;
+    _text16_lma		= .;
-    _text16_load_offset	    = ALIGN ( _max_align );
+    .			+= _text16_filesz;
-    _text16_load_addr	    = _text16_link_addr + _text16_load_offset;
+    .			= ALIGN ( _max_align );
-    _text16_size	    = _etext16 - _text16;
-    _text16_progbits_size   = _etext16_progbits - _text16;
-    .			    = _text16_load_addr + _text16_progbits_size;
 
-    .			   -= _data16_link_addr;
+    _data16_lma		= .;
-    _data16_load_offset	    = ALIGN ( _max_align );
+    .			+= _data16_filesz;
-    _data16_load_addr	    = _data16_link_addr + _data16_load_offset;
+    .			= ALIGN ( _max_align );
-    _data16_size	    = _edata16 - _data16;
-    _data16_progbits_size   = _edata16_progbits - _data16;
-    .			    = _data16_load_addr + _data16_progbits_size;
 
-    .			   -= _textdata_link_addr;
+    _textdata_lma	= .;
-    _textdata_load_offset   = ALIGN ( _max_align );
+    .			+= _textdata_filesz;
-    _textdata_load_addr	    = _textdata_link_addr + _textdata_load_offset;
+    .			= ALIGN ( _max_align );
-    _textdata_size	    = _etextdata - _textdata;
-    _textdata_progbits_size = _etextdata_progbits - _textdata;
-    .			    = _textdata_load_addr + _textdata_progbits_size;
 
-    _load_size		    = . - _load_addr;
+    _filesz		= .; /* Do not include zinfo block in file size */
 
-    .			   -= _zinfo_link_addr;
+    _zinfo_lma		= .;
-    _zinfo_load_offset	    = ALIGN ( _max_align );
+    .			+= _zinfo_filesz;
-    _zinfo_load_addr	    = _zinfo_link_addr + _zinfo_load_offset;
+    .			= ALIGN ( _max_align );
-    _zinfo_size		    = _ezinfo - _zinfo;
-    _zinfo_progbits_size    = _ezinfo_progbits - _zinfo;
-    .			    = _zinfo_load_addr + _zinfo_progbits_size;
-
-    _payload_offset	    = _text16_load_offset;
-
-    /*
-     * Alignment checks.  ALIGN() can only operate on the location
-     * counter, so we set the location counter to each value we want
-     * to check.
-     */
-
-    . = _prefix_load_addr - _prefix_link_addr;
-    _assert = ASSERT ( ( . == ALIGN ( _max_align ) ),
-		       "_prefix is badly aligned" );
-
-    . = _text16_load_addr - _text16_link_addr;
-    _assert = ASSERT ( ( . == ALIGN ( _max_align ) ),
-		       "_text16 is badly aligned" );
-
-    . = _data16_load_addr - _data16_link_addr;
-    _assert = ASSERT ( ( . == ALIGN ( _max_align ) ),
-		       "_data16 is badly aligned" );
-
-    . = _textdata_load_addr - _textdata_link_addr;
-    _assert = ASSERT ( ( . == ALIGN ( _max_align ) ),
-		       "_text is badly aligned" );
 
     /*
      * Values calculated to save code from doing it
+     *
      */
-    _prefix_size_pgh	= ( ( _prefix_size + 15 ) / 16 );
+    _prefix_memsz_pgh	= ( ( _prefix_memsz + 15 ) / 16 );
-    _prefix_size_sect	= ( ( _prefix_size + 511 ) / 512 );
+    _prefix_memsz_sect	= ( ( _prefix_memsz + 511 ) / 512 );
-    _text16_size_pgh	= ( ( _text16_size + 15 ) / 16 );
+    _text16_memsz_pgh	= ( ( _text16_memsz + 15 ) / 16 );
-    _data16_size_pgh	= ( ( _data16_size + 15 ) / 16 );
+    _data16_memsz_pgh	= ( ( _data16_memsz + 15 ) / 16 );
 
     /*
-     * Load sizes in paragraphs and sectors.  Note that wherever the
+     * File size in paragraphs and sectors.  Note that wherever the
-     * _load_size variables are used, there must be a corresponding
+     * _filesz variables are used, there must be a corresponding
      * .zinfo.fixup section.
+     *
      */
-    _load_size_pgh	= ( ( _load_size + 15 ) / 16 );
+    _filesz_pgh		= ( ( _filesz + 15 ) / 16 );
-    _load_size_sect	= ( ( _load_size + 511 ) / 512 );
+    _filesz_sect	= ( ( _filesz + 511 ) / 512 );
 }